Dreame A3 AWD 2000

No RTK station and no boundary wire. The LiDAR covers 360 degrees horizontally by 59 degrees vertically and reads 1,574.8 in at 10% reflectivity and 2,755.9 in at 80%; the front camera module is 2 MP with an 89 degree horizontal angle of view

The garden is set up by driving the boundary from the app and letting the robot auto-map the rest, with no wire, beacon, GPS stake or antenna

Dreame's headline claim for the A3 AWD is that it navigates with no RTK reference station

A 360 degree 3D LiDAR turret on the top cover, which also handles positioning and the sensing of water and dirt

An algorithm-assisted HDR front camera trained on more than 300 obstacle categories, with a low-speed safety mode and animal activity zones

Up to 150 zones, each with its own cutting height, frequency and pattern, plus two saved maps for a front and a back garden that do not connect

No-go zones are drawn in the Dreamehome app for pools, sandpits, flowerbeds and trampolines, and can still be created or deleted after the map is finished

Built-in GNSS (GPS/GLONASS/BDS/Galileo/QZSS), with the live position shown on Google Maps in the app over the 4G Link module

A PIN code set during setup is what unlocks the robot after a lift, a tilt or a Stop button press

Lift Alarm sounds and locks the robot the moment it is picked up, and Off-Map Alarm does the same as soon as it leaves the mapped garden

Wi-Fi 2.4 GHz (2400 to 2483.5 MHz), 802.11 b/g/n

The specification sheet lists Wi-Fi 2.4 GHz only

2.4 GHz to 2.4835 GHz; the app pairs over Bluetooth first and mapping can be completed with no Wi-Fi connection

Pre-installed Link module on LTE-FDD B1/3/7/8/20/28A and LTE-TDD B38/40/41. The product page and the US listing both include one year of free 4G data, and the service can be extended through Dreame after-sales

No proprietary radio link: the mower carries no RTK antenna and nothing pairs with the charging station over a private band

Dreame rates the 2000 trim at 2,000 m2 and sells it as the 0.50 acre model; the manual's specification table states 0.49 acre. The 1000 and 1600 trims of the same mower are rated 1,000 m2 and 1,600 m2

80% is 38.7 degrees; the robot stops and asks for the PIN code once it tilts past 39 degrees

Four hub motors: two omni wheels at the front and two off-road drive wheels at the rear

Dreame quotes 2.17 in on the product page; the troubleshooting table puts the hard limit at 2.2 in

20 cm across a single blade disc, which is what keeps the robot down to a 23.6 in narrow passage

3 to 10 cm, set from the app in 5 mm (0.2 in) increments

The blade disc extends outward while mowing a boundary. Dreame's specification table quotes a disc-to-edge distance under 1.91 in and the Amazon listing calls it 1.97 in edge trimming

Three pivoting blades on a single EdgeMaster disc, replaced as a set every 6 to 8 weeks; 9 spare blades and 3 holders are in the box

Dreame publishes the EGMF figure per day rather than per hour: 1,200 m2 in standard mode, 2,200 m2 in efficient mode and 2,400 m2 in rush mode, each over 24 hours

Two weekly schedules, Spr/Sum and Aut/Win, are created automatically from the mapped lawn size, with a Do Not Disturb window for quiet hours

Rain Protection and Frost Protection run on their own: below 42.8°F the robot parks and stops charging, and it resumes once the temperature rises above 51.8°F

Real-Time Location puts the robot on Google Maps and Real-Time Video streams the front camera, with a Patrol mode that sends it around chosen spots while it is on standby

Manual Mode drives the robot from the app at 0.45 to 0.8 m/s, and it is also how the boundary is walked during mapping

The manual's parts diagram labels the LiDAR, the front camera, the display, the knob and the Stop button but no light, and neither the product page nor the listing mentions one

Schedules, per-zone rules and custom mowing shapes are set in the Dreamehome app, and the community Home Assistant integration exposes the mower as ordinary entities to build automations from

Neither the A3 AWD product page, the Amazon listing nor the user manual mentions Google Home, and Dreame publishes no compatibility list for its mowers

Neither the A3 AWD product page, the Amazon listing nor the user manual mentions Alexa, and Dreame publishes no compatibility list for its mowers

Dreame publishes no HomeKit path for its robotic mowers and this one is not Matter certified, so Apple Home has no way to add it

No Works with SmartThings listing and no Matter certification, so SmartThings has nothing to connect to

The community Dreame Lawn Mower integration, installed through HACS, signs in to the Dreamehome account and creates a lawn_mower entity plus battery, map and schedule entities. Its supported devices table validates the A3 AWD 1000 (dreame.mower.q2501a), the same A3 AWD series and manual as this trim; the 2000 trim is not named separately

Matter appears nowhere on the product page, the listing or the 42 page manual, whose radio section lists only Wi-Fi 2.4 GHz, Bluetooth and LTE

Lithium pack MBPA14, rated 5 Ah at 18 V

Dreame does not publish a runtime per charge for this mower, on the product page or in the manual's specification table

Manual specification table for MXXA7302 on its 5 A charger; the 1000 trim takes 65 minutes on a 3 A charger. The Amazon listing advertises it as a 45 minute fast charge

The manual's only replaceable part is the blade set; there is a battery compartment on the underside but no battery replacement procedure

Rain Protection pauses mowing and sends the robot back to the station when it rains, with a drying delay set in the app; the LiDAR is also what senses water and dirt

Lifting a wheel off the ground or tilting the robot past 39 degrees stops it and locks it until the PIN code is entered on the control panel

The front camera detects human presence and the AI vision covers more than 300 obstacle categories, with animal activity zones and a low-speed safety mode; a Child Lock locks the robot if the cover is left open for 5 minutes

Physical Stop button on the top cover; once pressed, the PIN code has to be entered on the control panel before the robot will run again