Mammotion LUBA 2 AWD 5000HX

RTK positioning from a local reference station, backed by the UltraSense AI Vision system on a 5 TOPS chip that keeps the robot on track for up to 984 ft without satellites

Perimeter wire free: the lawn is defined as a virtual map in the Mammotion app instead of a buried cable

The box includes the RTK reference station, its radio antenna, the trident ground stake and two mounting poles; corrections reach the robot over a LoRa link or over the internet

Mammotion lists positioning as vision plus RTK and obstacle avoidance as vision, ultrasonic radar and a physical bumper. There is no LiDAR on the LUBA 2 chassis; the 360 degree LiDAR arrived with the LUBA 3

UltraSense AI Vision recognises over 200 objects and decides whether what is ahead is tall grass to mow or an obstacle to avoid, such as a child or a pet

Up to 50 mowing zones stored, covering front and back gardens, road sides and channels between them

No-go zones are drawn in the app alongside task areas and channels, and the mower can run extra laps around the restricted area

The app tracks the robot in real time by GPS and 4G positioning while it is online, and the chassis also takes an AirTag

The anti-theft system is account based: the first user becomes the owner and grants family access. There is no keypad and Mammotion publishes no start-up PIN for the LUBA 2

The alarm sounds when the robot is lifted, and the app pushes a geofence alert when it leaves its designated mowing zones

Mammotion lists the LUBA 2 AWD connectivity as 4G, Bluetooth and Wi-Fi with no band beyond 2.4 GHz, unlike the LUBA 3 manual, which does publish 5 GHz operating bands

Setup pairs the phone to the robot over Bluetooth before the Wi-Fi or 4G connection is configured

A 4G module is built in, with one year of data included, and it carries the internet RTK corrections and the GPS tracking

The RTK reference station talks to the robot over a dedicated LoRa radio link by default; the app can switch that link to internet RTK instead

Max. mowing size of 5,000 m² (1.25 acres) for the 5000 model, with in-app area storage up to 6,000 m²

Max. climbing ability 80% (38.6 degrees); the slope limit at the edge of the lawn is lower, 45% (24 degrees)

All-wheel drive on omni-wheels with an adaptive spring suspension, driven by a 165 W four-wheel motor

Vertical obstacle passing ability of 80 mm on the H chassis, twice the 50 mm of the standard version

40 cm cutting width from two discs driven by a 165 W motor

This is the H chassis, 55-100 mm. The standard version of the same model cuts 25-70 mm instead

Cutting height is set in the Mammotion app, together with task speed, path spacing and cutting angle

No edge mode to enable: the mower rides on the boundary automatically and Mammotion claims cutting to within 2 in of a wall

Two cutting discs with six pivoting razor blades each, replaced every 3 months or 150 hours of mowing

Task schedules are set per area in the Mammotion app

The robot reacts to rain through its own sensor, but Mammotion documents no forecast-driven scheduling for the LUBA 2

The app shows the robot's live position on the map, and its FPV mode streams the vision camera

The app has a manual control mode with its own speed limit setting, which the side indicator reports as manual control mode

The manual's front-view parts list covers the start, emergency stop, auto-return, grass and power buttons, the ultrasonic sensor and the indicators, with no work lamp anywhere on the robot

Once the Mammotion account is linked to Alexa or Google Home the mower can be driven from routines, and the Home Assistant integration exposes it to full automations

Voice control is listed as Alexa and Google Home in the LUBA 2 AWD specification table

Voice control is listed as Alexa and Google Home in the LUBA 2 AWD specification table; the Mammotion account is linked through the Alexa skill

Mammotion documents Alexa and Google Home only, and the LUBA 2 is not a Matter device, so there is no path into the Home app

Mammotion documents Alexa and Google Home only, and the LUBA 2 is not a Matter device, so the automatic Works with SmartThings path does not apply

The community Mammotion integration for Home Assistant, installed through HACS, controls and monitors the mowers by signing in to the Mammotion account. It is built on PyMammotion, which names the Luba family as supported

Mammotion makes no Matter claim for the LUBA 2 AWD and the model is not in the CSA certified product database

The user manual covers cleaning, blade replacement and battery maintenance but documents no way to remove or swap the pack, which is internal

Rain detection is listed YES in the specification table: the robot returns to the station when the lawn gets wet

The manual documents a lift sensor that halts the robot, and the indicator codes cover being lifted, tilted or flipped over

The AI vision system is trained to tell tall grass apart from an obstacle to avoid, naming children and animals

A physical emergency stop button sits on the top of the robot and holds top priority over every other command