The Smart Device Compare comparison

Refoss EM06P vs Sonoff MINI PM Matter Over WiFi Power Meter (Non-Switch)

Understand the differences. Decide what matters to your home.

Before you compare every specification

Key differences between Refoss EM06P and Sonoff MINI PM Matter Over WiFi Power Meter (Non-Switch)

A summary of selected recorded differences between these energy monitors. Check the full specification table below for details and conditions.

Feature differences among your selected devices

Time Of Use Rates (data monitoring): Refoss EM06P — No; Sonoff MINI PM Matter Over WiFi Power Meter (Non-Switch) — Yes (Fixed or time-of-use pricing, with consumption shown per rate band).
Load Management (features): Refoss EM06P — Yes (Zero feed-in control when paired with a solar system); Sonoff MINI PM Matter Over WiFi Power Meter (Non-Switch) — No (With no relay it can raise a threshold alert but cannot shed the load itself).
Din Rail Mount (installation): Refoss EM06P — Yes (EU standard DIN rail, flame-retardant PC housing); Sonoff MINI PM Matter Over WiFi Power Meter (Non-Switch) — No (Indoor flush mounting only, with no rail clip).
Alexa (integrations): Refoss EM06P — No (Alexa has no energy meter device type and this meter has no relay to expose as a switch, so a skill has nothing to publish); Sonoff MINI PM Matter Over WiFi Power Meter (Non-Switch) — Yes (Reached by adding the meter to eWeLink and linking the account, the path SONOFF documents for this model).

Specifications to check side by side

Data History (data monitoring): Refoss EM06P — 5 years (Free cloud storage, daily data kept up to 5 years with no subscription); Sonoff MINI PM Matter Over WiFi Power Meter (Non-Switch) — 1 year (Up to one year of energy data, and going offline does not interrupt the recording).
Power Supply (installation): Refoss EM06P — Mains (breaker panel); Sonoff MINI PM Matter Over WiFi Power Meter (Non-Switch) — Mains (100-240 V).
Apple Home (integrations): Refoss EM06P — No; Sonoff MINI PM Matter Over WiFi Power Meter (Non-Switch) — Upcoming platform support (The meter is a Matter over Wi-Fi device, but SONOFF's own platform table marks Apple Home as not yet able to add it: the Home app still does not accept the Matter energy meter device type. Nothing on SONOFF's side is missing, so the meter gets in once Apple supports that type.).
Monitored Circuits (metering): Refoss EM06P — 6 (Six independent channels that can be merged for a combined total); Sonoff MINI PM Matter Over WiFi Power Meter (Non-Switch) — 1 (One circuit, the load wired through its L and L Out terminals).

Information still to confirm

7 of 39 comparison fields lack a resolved value for at least one selected device. Missing information is not evidence that a feature is absent.
Check the full table and manufacturer documentation before ruling out a device.

These observations are derived from recorded catalog data and have not all been independently verified. Confirm details with the manufacturer before purchasing.

Compare capabilities, compatibility and setup requirements.

Option 1 · Refoss

Refoss EM06P

Last updated October 2026

View full device profile

Option 2 · Sonoff

Sonoff MINI PM Matter Over WiFi Power Meter (Non-Switch)

Last updated October 2026

View full device profile

What the catalog tells us

Understand the tradeoffs.

These counts describe the available data, not a quality score. More features do not automatically make a better device.

13differences with recorded values for every device

7rows with missing or unspecified information

Consider your setup

Apple Home

Refoss EM06PNo
Sonoff MINI PM Matter Over WiFi Power Meter (Non-Switch)Upcoming platform support

Confirm which features appear in Apple Home and whether extra hardware or a subscription is needed for your intended use.

Inspect the specifications

Consider your setup

Matter

Refoss EM06PNo
Sonoff MINI PM Matter Over WiFi Power Meter (Non-Switch)Yes

Confirm the exact device type and the features exposed in your chosen platform. Protocol support does not establish feature parity across apps.

Inspect the specifications

Your priorities, side by side

Focus on what changes.

Mark the specifications you care about. Open manufacturer sources for verification scope; fields without citations remain catalog data. Expand notes for other qualifications.

Differences onlyMy priorities (0)

Showing 39 of 39 rows. “Not recorded” does not mean “No”.

Reading layout

Connectivity

2.4 GHz Wi-Fi

Refoss EM06P: Yes
Catalog note
High-gain external antenna
Sonoff MINI PM Matter Over WiFi Power Meter (Non-Switch): Yes
Catalog note
IEEE 802.11 b/g/n on 2.4 GHz, from an ESP32-C6

5 GHz Wi-Fi

Refoss EM06P: No
Sonoff MINI PM Matter Over WiFi Power Meter (Non-Switch): No

Bluetooth

Refoss EM06P: Not recorded
Sonoff MINI PM Matter Over WiFi Power Meter (Non-Switch): Not recorded
Catalog note
The spec sheet lists Wi-Fi only, while the FCC grant authorises a second 2402-2480 MHz transmitter, so the radio is there but SONOFF never documents it as a feature

Ethernet

Refoss EM06P: No
Sonoff MINI PM Matter Over WiFi Power Meter (Non-Switch): No

Other

Refoss EM06P: No
Sonoff MINI PM Matter Over WiFi Power Meter (Non-Switch): No

Thread

Refoss EM06P: No
Sonoff MINI PM Matter Over WiFi Power Meter (Non-Switch): No

Z Wave

Refoss EM06P: No
Sonoff MINI PM Matter Over WiFi Power Meter (Non-Switch): No

Zigbee

Refoss EM06P: No
Sonoff MINI PM Matter Over WiFi Power Meter (Non-Switch): No
Catalog note
The Zigbee version of this meter is a separate model, the MINI-ZB1GP

Data Monitoring

Data Export

Refoss EM06P: Yes
Sonoff MINI PM Matter Over WiFi Power Meter (Non-Switch): Yes
Catalog note
Energy data and electricity bills export to a spreadsheet, from the app and from the local console

Data History

Refoss EM06P: 5 years
Catalog note
Free cloud storage, daily data kept up to 5 years with no subscription
Sonoff MINI PM Matter Over WiFi Power Meter (Non-Switch): 1 year
Catalog note
Up to one year of energy data, and going offline does not interrupt the recording

Energy Cost Tracking

Refoss EM06P: Yes
Sonoff MINI PM Matter Over WiFi Power Meter (Non-Switch): Yes
Catalog note
Custom currency and electricity rate, with the bill broken down in charts

Real Time Updates

Refoss EM06P: 1 min
Catalog note
Minute-level tracking with daily, weekly, monthly and yearly views
Sonoff MINI PM Matter Over WiFi Power Meter (Non-Switch): Not recorded

Time Of Use Rates

Refoss EM06P: No
Sonoff MINI PM Matter Over WiFi Power Meter (Non-Switch): Yes
Catalog note
Fixed or time-of-use pricing, with consumption shown per rate band

Usage Alerts

Refoss EM06P: Yes
Sonoff MINI PM Matter Over WiFi Power Meter (Non-Switch): Yes
Catalog note
Overcurrent, overpower, overvoltage and undervoltage thresholds, plus a run completion alert and a maintenance reminder based on accumulated runtime

Features

Automations

Refoss EM06P: Yes
Sonoff MINI PM Matter Over WiFi Power Meter (Non-Switch): Yes
Catalog note
Quick Scenes in eWeLink, and its readings drive automations in Home Assistant

Load Management

Refoss EM06P: Yes
Catalog note
Zero feed-in control when paired with a solar system
Sonoff MINI PM Matter Over WiFi Power Meter (Non-Switch): No
Catalog note
With no relay it can raise a threshold alert but cannot shed the load itself

Relay Output

Refoss EM06P: No
Sonoff MINI PM Matter Over WiFi Power Meter (Non-Switch): No
Catalog note
SONOFF states this is a non-switch product that cannot control the load it measures

Installation

Breaker Panel Install

Refoss EM06P: Yes
Sonoff MINI PM Matter Over WiFi Power Meter (Non-Switch): Yes
Catalog note
Wires into live and neutral behind a socket or inside a junction box, and SONOFF recommends a wall box at least 60 mm deep

Din Rail Mount

Refoss EM06P

Yes

Manufacturer source

DIN rail mounting is supported.

Refoss EM06P manufacturer product page →

Source section: Product description
Model: Refoss EM06P
Region: EU version
Firmware: Not specified by this source
Checked: 2026-10-04

Document check only; not a hands-on test or verification of every regional or firmware variant.

Catalog note

EU standard DIN rail, flame-retardant PC housing

Sonoff MINI PM Matter Over WiFi Power Meter (Non-Switch)

Catalog note

Indoor flush mounting only, with no rail clip

Power Supply

Refoss EM06P: Mains (breaker panel)
Sonoff MINI PM Matter Over WiFi Power Meter (Non-Switch): Mains (100-240 V)

Smart Meter Port

Refoss EM06P: No
Sonoff MINI PM Matter Over WiFi Power Meter (Non-Switch): No

Integrations

Alexa

Refoss EM06P: No
Catalog note
Alexa has no energy meter device type and this meter has no relay to expose as a switch, so a skill has nothing to publish
Sonoff MINI PM Matter Over WiFi Power Meter (Non-Switch): Yes
Catalog note
Reached by adding the meter to eWeLink and linking the account, the path SONOFF documents for this model

Apple Home

Refoss EM06P: No
Sonoff MINI PM Matter Over WiFi Power Meter (Non-Switch): Upcoming platform support
Catalog note
The meter is a Matter over Wi-Fi device, but SONOFF's own platform table marks Apple Home as not yet able to add it: the Home app still does not accept the Matter energy meter device type. Nothing on SONOFF's side is missing, so the meter gets in once Apple supports that type.

Google Home

Refoss EM06P: No
Sonoff MINI PM Matter Over WiFi Power Meter (Non-Switch): Yes
Catalog note
Reached by adding the meter to eWeLink and linking the account, the path SONOFF documents for this model

Home Assistant

Refoss EM06P

Yes

Manufacturer source

Home Assistant integration is documented.

Refoss EM06P manufacturer product page →

Source section: Product description
Model: Refoss EM06P
Region: EU version
Firmware: Not specified by this source
Checked: 2026-10-04

Document check only; not a hands-on test or verification of every regional or firmware variant.

Catalog note

Native integration over HTTP (JSON-RPC 2.0) and MQTT

Sonoff MINI PM Matter Over WiFi Power Meter (Non-Switch)

Yes

Catalog note

SONOFF's platform table gives Home Assistant two routes, Matter and MQTT discovery, and both carry the voltage, current, power and energy readings

Matter

Refoss EM06P: No
Sonoff MINI PM Matter Over WiFi Power Meter (Non-Switch): Yes
Catalog note
Matter over Wi-Fi: the device carries a Matter QR code and is commissioned by scanning it from a Matter app | Home Assistant is the one Matter controller that accepts it today, because the energy meter device type is not yet handled by the other ecosystems

SmartThings

Refoss EM06P: No
Sonoff MINI PM Matter Over WiFi Power Meter (Non-Switch): Yes
Catalog note
Reached through eWeLink account linking, and SONOFF notes SmartThings also reads the power consumption figures

Local Control

Local Api

Refoss EM06P

Yes

Manufacturer source

The device exposes a JSON-RPC 2.0 API.

Refoss EM06P manufacturer product page →

Source section: Product description
Model: Refoss EM06P
Region: EU version
Firmware: Not specified by this source
Checked: 2026-10-04

Document check only; not a hands-on test or verification of every regional or firmware variant.

Catalog note

Open API with JSON-RPC 2.0 over HTTP

Sonoff MINI PM Matter Over WiFi Power Meter (Non-Switch)

Yes

Catalog note

JSON-RPC 2.0 over HTTP and WebSocket, documented as an open API

Local Web Interface

Refoss EM06P

Yes

Catalog note

Reachable by local IP, no app required

Sonoff MINI PM Matter Over WiFi Power Meter (Non-Switch)

Yes

Manufacturer source

A local browser console is provided.

Sonoff MINI PM Matter Over WiFi Power Meter (Non-Switch) — manufacturer product description →

Source section: Product description / feature descriptions
Model: MINI-1GP
Region: Manufacturer listing for the named model/variant; regional equivalence has not been established
Firmware: Not specified by this source
Checked: 2026-10-04

This product measures energy and does not switch the attached load.

Document check only; not a hands-on test or verification of every regional or firmware variant.

Catalog note

The OpenEdge web console runs on the device and needs no app and no account

Mqtt

Refoss EM06P

Yes

Manufacturer source

MQTT is supported.

Refoss EM06P manufacturer product page →

Source section: Product description
Model: Refoss EM06P
Region: EU version
Firmware: Not specified by this source
Checked: 2026-10-04

Document check only; not a hands-on test or verification of every regional or firmware variant.

Sonoff MINI PM Matter Over WiFi Power Meter (Non-Switch)

Yes

Manufacturer source

MQTT access is listed.

Sonoff MINI PM Matter Over WiFi Power Meter (Non-Switch) — manufacturer product description →

Source section: Product description / feature descriptions
Model: MINI-1GP
Region: Manufacturer listing for the named model/variant; regional equivalence has not been established
Firmware: Not specified by this source
Checked: 2026-10-04

This product measures energy and does not switch the attached load.

Document check only; not a hands-on test or verification of every regional or firmware variant.

Catalog note

MQTT is configured from the device itself and is how Home Assistant reads the meter with no cloud in the path

Metering

Accuracy

Refoss EM06P

±1%

Manufacturer source

The stated measurement accuracy is one percent.

Refoss EM06P manufacturer product page →

Source section: Product description
Model: Refoss EM06P
Region: EU version
Firmware: Not specified by this source
Checked: 2026-10-04

Document check only; not a hands-on test or verification of every regional or firmware variant.

Sonoff MINI PM Matter Over WiFi Power Meter (Non-Switch)

Not recorded

Bidirectional Metering

Refoss EM06P

Yes

Catalog note

Monitors input from solar and wind for zero feed-in control

Sonoff MINI PM Matter Over WiFi Power Meter (Non-Switch)

Yes

Manufacturer source

Bidirectional energy metering is supported.

Sonoff MINI PM Matter Over WiFi Power Meter (Non-Switch) — manufacturer product description →

Source section: Product description / feature descriptions
Model: MINI-1GP
Region: Manufacturer listing for the named model/variant; regional equivalence has not been established
Firmware: Not specified by this source
Checked: 2026-10-04

This product measures energy and does not switch the attached load.

Document check only; not a hands-on test or verification of every regional or firmware variant.

Catalog note

Bi-directional metering separates what the load consumes from what a balcony solar array produces, which the app can record as a negative value

Branch Ct Rating

Refoss EM06P: Not applicable / unspecified
Sonoff MINI PM Matter Over WiFi Power Meter (Non-Switch): Not applicable / unspecified

Included Ct Sensors

Refoss EM06P: 6
Catalog note
6 x 120 A clamps
Sonoff MINI PM Matter Over WiFi Power Meter (Non-Switch): Not applicable / unspecified
Catalog note
Inline measurement, no current transformer involved

Main Ct Rating

Refoss EM06P

120 A

Manufacturer source

The stated limit is 120 A per channel.

Refoss EM06P manufacturer product page →

Source section: Product description
Model: Refoss EM06P
Region: EU version
Firmware: Not specified by this source
Checked: 2026-10-04

Document check only; not a hands-on test or verification of every regional or firmware variant.

Sonoff MINI PM Matter Over WiFi Power Meter (Non-Switch)

Not applicable / unspecified

Monitored Circuits

Refoss EM06P

Manufacturer source

Six measurement channels are provided.

Refoss EM06P manufacturer product page →

Source section: Product description
Model: Refoss EM06P
Region: EU version
Firmware: Not specified by this source
Checked: 2026-10-04

Document check only; not a hands-on test or verification of every regional or firmware variant.

Catalog note

Six independent channels that can be merged for a combined total

Sonoff MINI PM Matter Over WiFi Power Meter (Non-Switch)

Catalog note

One circuit, the load wired through its L and L Out terminals

Power Factor

Refoss EM06P: Yes
Catalog note
Voltage, current, active power and power factor per channel
Sonoff MINI PM Matter Over WiFi Power Meter (Non-Switch): No
Catalog note
SONOFF documents real-time voltage, current, power and accumulated energy, with no power factor reading

Split Phase

Refoss EM06P: Not recorded
Sonoff MINI PM Matter Over WiFi Power Meter (Non-Switch): No
Catalog note
Rated 100-240V~ 50/60Hz on a single line, so a 120/240 V split-phase service is out of scope

Three Phase

Refoss EM06P

Yes

Manufacturer source

Three-phase monitoring is supported.

Refoss EM06P manufacturer product page →

Source section: Product description
Model: Refoss EM06P
Region: EU version
Firmware: Not specified by this source
Checked: 2026-10-04

Document check only; not a hands-on test or verification of every regional or firmware variant.

Catalog note

Channels can be grouped to follow the three phases of one load

Sonoff MINI PM Matter Over WiFi Power Meter (Non-Switch)

Specifications for Refoss EM06P versus Sonoff MINI PM Matter Over WiFi Power Meter (Non-Switch)
Specification	Refoss EM06P	Sonoff MINI PM Matter Over WiFi Power Meter (Non-Switch)
Connectivity
2.4 GHz Wi-Fi	Yes Catalog note High-gain external antenna	Yes Catalog note IEEE 802.11 b/g/n on 2.4 GHz, from an ESP32-C6
5 GHz Wi-Fi	No	No
Bluetooth	Not recorded	Not recorded Catalog note The spec sheet lists Wi-Fi only, while the FCC grant authorises a second 2402-2480 MHz transmitter, so the radio is there but SONOFF never documents it as a feature
Ethernet	No	No
Other	No	No
Thread	No	No
Z Wave	No	No
Zigbee	No	No Catalog note The Zigbee version of this meter is a separate model, the MINI-ZB1GP
Data Monitoring
Data Export	Yes	Yes Catalog note Energy data and electricity bills export to a spreadsheet, from the app and from the local console
Data History	5 years Catalog note Free cloud storage, daily data kept up to 5 years with no subscription	1 year Catalog note Up to one year of energy data, and going offline does not interrupt the recording
Energy Cost Tracking	Yes	Yes Catalog note Custom currency and electricity rate, with the bill broken down in charts
Real Time Updates	1 min Catalog note Minute-level tracking with daily, weekly, monthly and yearly views	Not recorded
Time Of Use Rates	No	Yes Catalog note Fixed or time-of-use pricing, with consumption shown per rate band
Usage Alerts	Yes	Yes Catalog note Overcurrent, overpower, overvoltage and undervoltage thresholds, plus a run completion alert and a maintenance reminder based on accumulated runtime
Features
Automations	Yes	Yes Catalog note Quick Scenes in eWeLink, and its readings drive automations in Home Assistant
Load Management	Yes Catalog note Zero feed-in control when paired with a solar system	No Catalog note With no relay it can raise a threshold alert but cannot shed the load itself
Relay Output	No	No Catalog note SONOFF states this is a non-switch product that cannot control the load it measures
Installation
Breaker Panel Install	Yes	Yes Catalog note Wires into live and neutral behind a socket or inside a junction box, and SONOFF recommends a wall box at least 60 mm deep
Din Rail Mount	Yes Manufacturer source DIN rail mounting is supported. Refoss EM06P manufacturer product page → Source section Product description Model Refoss EM06P Region EU version Firmware Not specified by this source Checked 2026-10-04 Document check only; not a hands-on test or verification of every regional or firmware variant. Catalog note EU standard DIN rail, flame-retardant PC housing	No Catalog note Indoor flush mounting only, with no rail clip
Power Supply	Mains (breaker panel)	Mains (100-240 V)
Smart Meter Port	No	No
Integrations
Alexa	No Catalog note Alexa has no energy meter device type and this meter has no relay to expose as a switch, so a skill has nothing to publish	Yes Catalog note Reached by adding the meter to eWeLink and linking the account, the path SONOFF documents for this model
Apple Home	No	Upcoming platform support Catalog note The meter is a Matter over Wi-Fi device, but SONOFF's own platform table marks Apple Home as not yet able to add it: the Home app still does not accept the Matter energy meter device type. Nothing on SONOFF's side is missing, so the meter gets in once Apple supports that type.
Google Home	No	Yes Catalog note Reached by adding the meter to eWeLink and linking the account, the path SONOFF documents for this model
Home Assistant	Yes Manufacturer source Home Assistant integration is documented. Refoss EM06P manufacturer product page → Source section Product description Model Refoss EM06P Region EU version Firmware Not specified by this source Checked 2026-10-04 Document check only; not a hands-on test or verification of every regional or firmware variant. Catalog note Native integration over HTTP (JSON-RPC 2.0) and MQTT	Yes Catalog note SONOFF's platform table gives Home Assistant two routes, Matter and MQTT discovery, and both carry the voltage, current, power and energy readings
Matter	No	Yes Catalog note Matter over Wi-Fi: the device carries a Matter QR code and is commissioned by scanning it from a Matter app \| Home Assistant is the one Matter controller that accepts it today, because the energy meter device type is not yet handled by the other ecosystems
SmartThings	No	Yes Catalog note Reached through eWeLink account linking, and SONOFF notes SmartThings also reads the power consumption figures
Local Control
Local Api	Yes Manufacturer source The device exposes a JSON-RPC 2.0 API. Refoss EM06P manufacturer product page → Source section Product description Model Refoss EM06P Region EU version Firmware Not specified by this source Checked 2026-10-04 Document check only; not a hands-on test or verification of every regional or firmware variant. Catalog note Open API with JSON-RPC 2.0 over HTTP	Yes Catalog note JSON-RPC 2.0 over HTTP and WebSocket, documented as an open API
Local Web Interface	Yes Catalog note Reachable by local IP, no app required	Yes Manufacturer source A local browser console is provided. Sonoff MINI PM Matter Over WiFi Power Meter (Non-Switch) — manufacturer product description → Source section Product description / feature descriptions Model MINI-1GP Region Manufacturer listing for the named model/variant; regional equivalence has not been established Firmware Not specified by this source Checked 2026-10-04 This product measures energy and does not switch the attached load. Document check only; not a hands-on test or verification of every regional or firmware variant. Catalog note The OpenEdge web console runs on the device and needs no app and no account
Mqtt	Yes Manufacturer source MQTT is supported. Refoss EM06P manufacturer product page → Source section Product description Model Refoss EM06P Region EU version Firmware Not specified by this source Checked 2026-10-04 Document check only; not a hands-on test or verification of every regional or firmware variant.	Yes Manufacturer source MQTT access is listed. Sonoff MINI PM Matter Over WiFi Power Meter (Non-Switch) — manufacturer product description → Source section Product description / feature descriptions Model MINI-1GP Region Manufacturer listing for the named model/variant; regional equivalence has not been established Firmware Not specified by this source Checked 2026-10-04 This product measures energy and does not switch the attached load. Document check only; not a hands-on test or verification of every regional or firmware variant. Catalog note MQTT is configured from the device itself and is how Home Assistant reads the meter with no cloud in the path
Metering
Accuracy	±1% Manufacturer source The stated measurement accuracy is one percent. Refoss EM06P manufacturer product page → Source section Product description Model Refoss EM06P Region EU version Firmware Not specified by this source Checked 2026-10-04 Document check only; not a hands-on test or verification of every regional or firmware variant.	Not recorded
Bidirectional Metering	Yes Catalog note Monitors input from solar and wind for zero feed-in control	Yes Manufacturer source Bidirectional energy metering is supported. Sonoff MINI PM Matter Over WiFi Power Meter (Non-Switch) — manufacturer product description → Source section Product description / feature descriptions Model MINI-1GP Region Manufacturer listing for the named model/variant; regional equivalence has not been established Firmware Not specified by this source Checked 2026-10-04 This product measures energy and does not switch the attached load. Document check only; not a hands-on test or verification of every regional or firmware variant. Catalog note Bi-directional metering separates what the load consumes from what a balcony solar array produces, which the app can record as a negative value
Branch Ct Rating	Not applicable / unspecified	Not applicable / unspecified
Included Ct Sensors	6 Catalog note 6 x 120 A clamps	Not applicable / unspecified Catalog note Inline measurement, no current transformer involved
Main Ct Rating	120 A Manufacturer source The stated limit is 120 A per channel. Refoss EM06P manufacturer product page → Source section Product description Model Refoss EM06P Region EU version Firmware Not specified by this source Checked 2026-10-04 Document check only; not a hands-on test or verification of every regional or firmware variant.	Not applicable / unspecified
Monitored Circuits	6 Manufacturer source Six measurement channels are provided. Refoss EM06P manufacturer product page → Source section Product description Model Refoss EM06P Region EU version Firmware Not specified by this source Checked 2026-10-04 Document check only; not a hands-on test or verification of every regional or firmware variant. Catalog note Six independent channels that can be merged for a combined total	1 Catalog note One circuit, the load wired through its L and L Out terminals
Power Factor	Yes Catalog note Voltage, current, active power and power factor per channel	No Catalog note SONOFF documents real-time voltage, current, power and accumulated energy, with no power factor reading
Split Phase	Not recorded	No Catalog note Rated 100-240V~ 50/60Hz on a single line, so a 120/240 V split-phase service is out of scope
Three Phase	Yes Manufacturer source Three-phase monitoring is supported. Refoss EM06P manufacturer product page → Source section Product description Model Refoss EM06P Region EU version Firmware Not specified by this source Checked 2026-10-04 Document check only; not a hands-on test or verification of every regional or firmware variant. Catalog note Channels can be grouped to follow the three phases of one load	No

Know what’s behind the comparison.

The table matches specifications by section and field. It preserves notes, separates missing data from explicit “No” values, and keeps qualifications attached to their values. No overall winner is assigned from feature counts.

Read our comparison methodology