The Smart Device Compare comparison

Aqara Hub M100 vs YoLink Hub

Understand the differences. Decide what matters to your home.

Before you compare every specification

Key differences between Aqara Hub M100 and YoLink Hub

A summary of selected recorded differences between these hubs. Check the full specification table below for details and conditions.

Feature differences among your selected devices

Ethernet (connectivity): Aqara Hub M100 — No; YoLink Hub — Yes (RJ45 network connector on the rear, with an Ethernet patch cable in the box).
Apple Home (integrations): Aqara Hub M100 — Yes; YoLink Hub — No (YoLink's compatibility list for this Hub is Alexa, Google, IFTTT, Home Assistant and Raedius, with no Apple Home path; the Matter route belongs to the separate Local Hub (YS1606)).
SmartThings (integrations): Aqara Hub M100 — Yes (Aqara's official spec sheet lists SmartThings among the compatible platforms); YoLink Hub — No (SmartThings is not on YoLink's compatibility list for this Hub, and the YS1603 is not a Matter device).
Bluetooth (protocols): Aqara Hub M100 — Yes (Bluetooth LE 5.2); YoLink Hub — No (The technical specs list only two radios, LoRa at 923.3 MHz and Wi-Fi at 2412 to 2462 MHz).

Specifications to check side by side

Subdevices (features): Aqara Hub M100 — 40 (Up to 20 Aqara Zigbee devices plus 20 Thread devices); YoLink Hub — 180 (YoLink support states there is no hard limit and that a single Hub carried 180 devices without issues in testing, recommending a second Hub between 100 and 200 devices).
Third Party Devices (protocols): Aqara Hub M100 — Partially (Matter controller that adds third-party Matter devices (Thread, Wi-Fi, bridges) to Aqara Home, but its Zigbee radio pairs only Aqara Zigbee devices, 20 Zigbee plus 20 Thread.); YoLink Hub — No (Hosts only YoLink LoRa devices; other brands reach YoLink only through cloud integrations (Alexa, Google, IFTTT, Home Assistant), never by pairing to the hub.).

Information still to confirm

3 of 31 comparison fields lack a resolved value for at least one selected device. Missing information is not evidence that a feature is absent.
Check the full table and manufacturer documentation before ruling out a device.

These observations are derived from recorded catalog data and have not all been independently verified. Confirm details with the manufacturer before purchasing.

Compare capabilities, compatibility and setup requirements.

Option 1 · Aqara

Aqara Hub M100

Last updated October 2026

View full device profile

Option 2 · YoLink

YoLink Hub

Last updated October 2026

View full device profile

What the catalog tells us

Understand the tradeoffs.

These counts describe the available data, not a quality score. More features do not automatically make a better device.

9differences with recorded values for every device

3rows with missing or unspecified information

Consider your setup

Apple Home

Aqara Hub M100Yes
YoLink HubNo

Confirm which features appear in Apple Home and whether extra hardware or a subscription is needed for your intended use.

Inspect the specifications

Your priorities, side by side

Focus on what changes.

Mark the specifications you care about. Open manufacturer sources for verification scope; fields without citations remain catalog data. Expand notes for other qualifications.

Differences onlyMy priorities (0)

Showing 31 of 31 rows. “Not recorded” does not mean “No”.

Reading layout

Connectivity

2.4 GHz Wi-Fi

Aqara Hub M100: Yes
Catalog note
Wi-Fi IEEE 802.11 b/g/n/ax 2.4 GHz (Wi-Fi 6) with WPA3
YoLink Hub: Yes
Catalog note
Wi-Fi frequency 2412 to 2462 MHz, and the requirements list a router with 2.4 GHz Wi-Fi

5 GHz Wi-Fi

Aqara Hub M100: No
YoLink Hub: No
Catalog note
YoLink support states the Hub does not support the 5 GHz Wi-Fi band

Ethernet

Aqara Hub M100: No
YoLink Hub: Yes
Catalog note
RJ45 network connector on the rear, with an Ethernet patch cable in the box

Features

Node Red

Aqara Hub M100: No
YoLink Hub: No

Onvif

Aqara Hub M100: No
YoLink Hub: No

RTSP

Aqara Hub M100: No
YoLink Hub: No

Subdevices

Aqara Hub M100: 40
Catalog note
Up to 20 Aqara Zigbee devices plus 20 Thread devices
YoLink Hub: 180
Catalog note
YoLink support states there is no hard limit and that a single Hub carried 180 devices without issues in testing, recommending a second Hub between 100 and 200 devices

Tailscale

Aqara Hub M100: No
YoLink Hub: No

Hardware

Cpu

Aqara Hub M100: Not recorded
YoLink Hub: 32-bit RISC (Semtech LoRa YL09 module)
Catalog note
The official technical specs list a Semtech LoRa RF Module YL09 microcontroller with a 32-bit RISC processor

Memory

Aqara Hub M100: Not recorded
YoLink Hub: Not recorded

Microphone

Aqara Hub M100: No
YoLink Hub: No

microSD card slot

Aqara Hub M100: No
YoLink Hub: No
Catalog note
The only connectors are the rear RJ45 network port and the Micro-USB B power input

Power Over Ethernet

Aqara Hub M100: No
Catalog note
The only port is a USB-A male plug, which supplies power and data
YoLink Hub: No
Catalog note
YoLink support states the current version of the Hub has no built-in PoE functionality, and suggests a PoE splitter with a MicroUSB connector as a workaround

Speakers

Aqara Hub M100: No
Catalog note
Aqara's own hub comparison lists no additional functionality for the M100, while the M2 and M3 carry a speaker with custom ringtones
YoLink Hub: No
Catalog note
The datasheet lists only status LEDs; audible alerts are the job of the separate YoLink SpeakerHub

Storage

Aqara Hub M100: Not recorded
YoLink Hub: Not recorded

Integrations

Alexa

Aqara Hub M100: Yes
YoLink Hub: Yes
Catalog note
The official product page lists Alexa among the compatible platforms

Apple Home

Aqara Hub M100: Yes
YoLink Hub: No
Catalog note
YoLink's compatibility list for this Hub is Alexa, Google, IFTTT, Home Assistant and Raedius, with no Apple Home path; the Matter route belongs to the separate Local Hub (YS1606)

Google Home

Aqara Hub M100: Yes
YoLink Hub: Yes
Catalog note
YoLink support confirms the Hub can be integrated with Google Home, where the paired YoLink devices show up rather than the Hub itself

Home Assistant

Aqara Hub M100: Yes
Catalog note
Advanced Matter bridging keeps Aqara device functionality inside Home Assistant
YoLink Hub: Yes
Catalog note
Home Assistant ships an official YoLink integration that is set up by adding the YoLink hub to the instance, and the product page lists Home Assistant among the compatible platforms

SmartThings

Aqara Hub M100: Yes
Catalog note
Aqara's official spec sheet lists SmartThings among the compatible platforms
YoLink Hub: No
Catalog note
SmartThings is not on YoLink's compatibility list for this Hub, and the YS1603 is not a Matter device

Protocols

Bluetooth

Aqara Hub M100: Yes
Catalog note
Bluetooth LE 5.2
YoLink Hub: No
Catalog note
The technical specs list only two radios, LoRa at 923.3 MHz and Wi-Fi at 2412 to 2462 MHz

Aqara Hub M100: No
YoLink Hub: No

Matter bridge

Aqara Hub M100: Yes
Catalog note
Certified Matter hub that works as both controller and bridge, exposing its Aqara Zigbee devices to third-party Matter ecosystems
YoLink Hub: No
Catalog note
Matter and a local API arrived with the separate YoLink Local Hub (YS1606); YoLink support states the YS1603 does not support local networks

Third Party Devices

Aqara Hub M100: Partially
Catalog note
Matter controller that adds third-party Matter devices (Thread, Wi-Fi, bridges) to Aqara Home, but its Zigbee radio pairs only Aqara Zigbee devices, 20 Zigbee plus 20 Thread.
YoLink Hub: No
Catalog note
Hosts only YoLink LoRa devices; other brands reach YoLink only through cloud integrations (Alexa, Google, IFTTT, Home Assistant), never by pairing to the hub.

Thread border router

Aqara Hub M100: Yes
Catalog note
Thread border router and mesh extender for up to 20 Thread devices
YoLink Hub: No

Z Wave

Aqara Hub M100: No
YoLink Hub: No

Zigbee coordinator

Aqara Hub M100: Yes
Catalog note
Hosts up to 20 Aqara Zigbee devices; third-party Zigbee devices are not supported
YoLink Hub: No
Catalog note
The Hub hosts YoLink's own LoRa network at 923.3 MHz, not a Zigbee mesh

Sensors

Humidity

Aqara Hub M100: No
YoLink Hub: No

Light

Aqara Hub M100: No
YoLink Hub: No

Motion

Aqara Hub M100: No
YoLink Hub: No

Temperature

Aqara Hub M100: No
YoLink Hub: No

Specifications for Aqara Hub M100 versus YoLink Hub
Specification	Aqara Hub M100	YoLink Hub
Connectivity
2.4 GHz Wi-Fi	Yes Catalog note Wi-Fi IEEE 802.11 b/g/n/ax 2.4 GHz (Wi-Fi 6) with WPA3	Yes Catalog note Wi-Fi frequency 2412 to 2462 MHz, and the requirements list a router with 2.4 GHz Wi-Fi
5 GHz Wi-Fi	No	No Catalog note YoLink support states the Hub does not support the 5 GHz Wi-Fi band
Ethernet	No	Yes Catalog note RJ45 network connector on the rear, with an Ethernet patch cable in the box
Features
Node Red	No	No
Onvif	No	No
RTSP	No	No
Subdevices	40 Catalog note Up to 20 Aqara Zigbee devices plus 20 Thread devices	180 Catalog note YoLink support states there is no hard limit and that a single Hub carried 180 devices without issues in testing, recommending a second Hub between 100 and 200 devices
Tailscale	No	No
Hardware
Cpu	Not recorded	32-bit RISC (Semtech LoRa YL09 module) Catalog note The official technical specs list a Semtech LoRa RF Module YL09 microcontroller with a 32-bit RISC processor
Memory	Not recorded	Not recorded
Microphone	No	No
microSD card slot	No	No Catalog note The only connectors are the rear RJ45 network port and the Micro-USB B power input
Power Over Ethernet	No Catalog note The only port is a USB-A male plug, which supplies power and data	No Catalog note YoLink support states the current version of the Hub has no built-in PoE functionality, and suggests a PoE splitter with a MicroUSB connector as a workaround
Speakers	No Catalog note Aqara's own hub comparison lists no additional functionality for the M100, while the M2 and M3 carry a speaker with custom ringtones	No Catalog note The datasheet lists only status LEDs; audible alerts are the job of the separate YoLink SpeakerHub
Storage	Not recorded	Not recorded
Integrations
Alexa	Yes	Yes Catalog note The official product page lists Alexa among the compatible platforms
Apple Home	Yes	No Catalog note YoLink's compatibility list for this Hub is Alexa, Google, IFTTT, Home Assistant and Raedius, with no Apple Home path; the Matter route belongs to the separate Local Hub (YS1606)
Google Home	Yes	Yes Catalog note YoLink support confirms the Hub can be integrated with Google Home, where the paired YoLink devices show up rather than the Hub itself
Home Assistant	Yes Catalog note Advanced Matter bridging keeps Aqara device functionality inside Home Assistant	Yes Catalog note Home Assistant ships an official YoLink integration that is set up by adding the YoLink hub to the instance, and the product page lists Home Assistant among the compatible platforms
SmartThings	Yes Catalog note Aqara's official spec sheet lists SmartThings among the compatible platforms	No Catalog note SmartThings is not on YoLink's compatibility list for this Hub, and the YS1603 is not a Matter device
Protocols
Bluetooth	Yes Catalog note Bluetooth LE 5.2	No Catalog note The technical specs list only two radios, LoRa at 923.3 MHz and Wi-Fi at 2412 to 2462 MHz
Ir	No	No
Matter bridge	Yes Catalog note Certified Matter hub that works as both controller and bridge, exposing its Aqara Zigbee devices to third-party Matter ecosystems	No Catalog note Matter and a local API arrived with the separate YoLink Local Hub (YS1606); YoLink support states the YS1603 does not support local networks
Third Party Devices	Partially Catalog note Matter controller that adds third-party Matter devices (Thread, Wi-Fi, bridges) to Aqara Home, but its Zigbee radio pairs only Aqara Zigbee devices, 20 Zigbee plus 20 Thread.	No Catalog note Hosts only YoLink LoRa devices; other brands reach YoLink only through cloud integrations (Alexa, Google, IFTTT, Home Assistant), never by pairing to the hub.
Thread border router	Yes Catalog note Thread border router and mesh extender for up to 20 Thread devices	No
Z Wave	No	No
Zigbee coordinator	Yes Catalog note Hosts up to 20 Aqara Zigbee devices; third-party Zigbee devices are not supported	No Catalog note The Hub hosts YoLink's own LoRa network at 923.3 MHz, not a Zigbee mesh
Sensors
Humidity	No	No
Light	No	No
Motion	No	No
Temperature	No	No

Know what’s behind the comparison.

The table matches specifications by section and field. It preserves notes, separates missing data from explicit “No” values, and keeps qualifications attached to their values. No overall winner is assigned from feature counts.

Read our comparison methodology