The Smart Device Compare comparison

TP-Link Tapo H100 vs X-Sense SBS50 Base Station

Understand the differences. Decide what matters to your home.

Before you compare every specification

Key differences between TP-Link Tapo H100 and X-Sense SBS50 Base Station

A summary of selected recorded differences between these hubs. Check the full specification table below for details and conditions.

Feature differences among your selected devices

Apple Home (integrations): TP-Link Tapo H100 — Yes (Via Matter. TP-Link states the H100 supports Matter Bridging, so the hub is added to Apple Home as a Matter bridge and its compatible sensors appear there; there is no native HomeKit profile); X-Sense SBS50 Base Station — No (X-Sense claims no HomeKit support for this model, and the SBS50 is not Matter certified so it has no Matter path into Apple Home either).
Google Home (integrations): TP-Link Tapo H100 — Yes (TP-Link's Google Home setup guide lists the Tapo H100 under its Smart Hub applicable models); X-Sense SBS50 Base Station — No (X-Sense advertises Alexa as the only voice platform for its base station line and claims no Google support on the product page or the collection listings).
SmartThings (integrations): TP-Link Tapo H100 — Yes (Via Matter. TP-Link states the H100 supports Matter Bridging, so the hub is added to SmartThings as a Matter bridge and its compatible sensors appear there); X-Sense SBS50 Base Station — No (X-Sense claims no SmartThings support for this model, and the SBS50 is not Matter certified so the automatic Works with SmartThings grant does not apply).
Matter bridge (protocols): TP-Link Tapo H100 — Yes (TP-Link documents Matter Bridging on the H100 (Device Settings > Bind to Matter), which exposes its T100, T110, T310 and T315 sensors to other platforms; the T300 water leak sensor and the S200B/S200D buttons are not covered yet); X-Sense SBS50 Base Station — No (The CSA certified-products database lists only the separate SBS0A Matter base station for X-Sense; the SBS50 has no Matter certification and exposes its sub-devices through the X-Sense app instead).

Specifications to check side by side

Subdevices (features): TP-Link Tapo H100 — 64 (Each Tapo Hub can connect up to a maximum of 64 devices, and the actual maximum may vary by device type); X-Sense SBS50 Base Station — 50 (X-Sense states one SBS50 manages up to 50 devices, with a cap of 10 STH51 thermo-hygrometers among them).

Information still to confirm

3 of 31 comparison fields lack a resolved value for at least one selected device. Missing information is not evidence that a feature is absent.
Check the full table and manufacturer documentation before ruling out a device.

These observations are derived from recorded catalog data and have not all been independently verified. Confirm details with the manufacturer before purchasing.

Compare capabilities, compatibility and setup requirements.

Option 1 · TP-Link

TP-Link Tapo H100

Last updated October 2026

View full device profile

Option 2 · X-Sense

X-Sense SBS50 Base Station

Catalog update date not recorded

View full device profile

What the catalog tells us

Understand the tradeoffs.

These counts describe the available data, not a quality score. More features do not automatically make a better device.

5differences with recorded values for every device

3rows with missing or unspecified information

Consider your setup

Apple Home

TP-Link Tapo H100Yes
X-Sense SBS50 Base StationNo

Confirm which features appear in Apple Home and whether extra hardware or a subscription is needed for your intended use.

Inspect the specifications

Your priorities, side by side

Focus on what changes.

Mark the specifications you care about. Open manufacturer sources for verification scope; fields without citations remain catalog data. Expand notes for other qualifications.

Differences onlyMy priorities (0)

Showing 31 of 31 rows. “Not recorded” does not mean “No”.

Reading layout

Connectivity

2.4 GHz Wi-Fi

TP-Link Tapo H100: Yes
Catalog note
Official specification lists the wireless type as 2.4GHz Wi-Fi, which the hub requires
X-Sense SBS50 Base Station: Yes
Catalog note
Official specifications list a 2.4 GHz Wi-Fi frequency and IEEE 802.11b/g/n as the wireless protocol

5 GHz Wi-Fi

TP-Link Tapo H100: No
X-Sense SBS50 Base Station: No
Catalog note
X-Sense states the base station is compatible with 2.4 GHz Wi-Fi only and is not compatible with a 5 GHz network

Ethernet

TP-Link Tapo H100: No
X-Sense SBS50 Base Station: No
Catalog note
Wi-Fi is the only uplink; the specifications list no wired network port

Features

Node Red

TP-Link Tapo H100: No
X-Sense SBS50 Base Station: No

Onvif

TP-Link Tapo H100: No
X-Sense SBS50 Base Station: No

RTSP

TP-Link Tapo H100: No
X-Sense SBS50 Base Station: No

Subdevices

TP-Link Tapo H100: 64
Catalog note
Each Tapo Hub can connect up to a maximum of 64 devices, and the actual maximum may vary by device type
X-Sense SBS50 Base Station: 50
Catalog note
X-Sense states one SBS50 manages up to 50 devices, with a cap of 10 STH51 thermo-hygrometers among them

Tailscale

TP-Link Tapo H100: No
X-Sense SBS50 Base Station: No

Hardware

Cpu

TP-Link Tapo H100: Not recorded
X-Sense SBS50 Base Station: Not recorded

Memory

TP-Link Tapo H100: Not recorded
X-Sense SBS50 Base Station: Not recorded

Microphone

TP-Link Tapo H100: No
X-Sense SBS50 Base Station: No
Catalog note
No microphone or voice feature is listed in the official specifications; the unit only signals with its LED and its sounder

microSD card slot

TP-Link Tapo H100: No
X-Sense SBS50 Base Station: No
Catalog note
The base station relays alarms to the X-Sense cloud and has no card slot or local storage of any kind

Power Over Ethernet

TP-Link Tapo H100: No
Catalog note
Plugs straight into a mains outlet (AC 100~240V, 50/60Hz) and has no Ethernet port
X-Sense SBS50 Base Station: No
Catalog note
Powered by its bundled adapter (input 100-240 V AC 50/60 Hz, output 5.0 V 1.0 A) and has no Ethernet port at all

Speakers

TP-Link Tapo H100: Yes
Catalog note
Built-in chime with 19 ringtones that doubles as a siren of up to 90 dB when a paired Tapo sensor triggers
X-Sense SBS50 Base Station: Yes
Catalog note
Built-in sounder rated at 100 dB, adjustable, that sounds together with every connected alarm

Storage

TP-Link Tapo H100: Not recorded
X-Sense SBS50 Base Station: Not recorded

Integrations

Alexa

TP-Link Tapo H100: Yes
Catalog note
TP-Link's Amazon Alexa setup guide lists the Tapo H100 under its Smart Hub applicable models
X-Sense SBS50 Base Station: Yes
Catalog note
X-Sense tags its base-station devices as Alexa Compatible, and the Amazon listings for the SBS50 accessories (the SKP0A keypad, the SDS0A door sensor and the SMS0A motion sensor) state Compatible with Alexa, Requires SBS50 Base Station, so the base station is the Alexa bridge for the system

Apple Home

TP-Link Tapo H100: Yes
Catalog note
Via Matter. TP-Link states the H100 supports Matter Bridging, so the hub is added to Apple Home as a Matter bridge and its compatible sensors appear there; there is no native HomeKit profile
X-Sense SBS50 Base Station: No
Catalog note
X-Sense claims no HomeKit support for this model, and the SBS50 is not Matter certified so it has no Matter path into Apple Home either

Google Home

TP-Link Tapo H100: Yes
Catalog note
TP-Link's Google Home setup guide lists the Tapo H100 under its Smart Hub applicable models
X-Sense SBS50 Base Station: No
Catalog note
X-Sense advertises Alexa as the only voice platform for its base station line and claims no Google support on the product page or the collection listings

Home Assistant

TP-Link Tapo H100: Yes
Catalog note
The official TP-Link Smart Home integration lists H100 and H200 as supported Tapo hubs, together with the hub-connected S200B, S200D, T100, T110, T300, T310 and T315
X-Sense SBS50 Base Station: Yes
Catalog note
X-Sense states that its Home Assistant compatibility runs through the SBS50 base station ecosystem, and the python-xsense library behind the community HACS integration maps SBS50 explicitly as a base station entity

SmartThings

TP-Link Tapo H100: Yes
Catalog note
Via Matter. TP-Link states the H100 supports Matter Bridging, so the hub is added to SmartThings as a Matter bridge and its compatible sensors appear there
X-Sense SBS50 Base Station: No
Catalog note
X-Sense claims no SmartThings support for this model, and the SBS50 is not Matter certified so the automatic Works with SmartThings grant does not apply

Protocols

Bluetooth

TP-Link Tapo H100: No
X-Sense SBS50 Base Station: No
Catalog note
The specifications enumerate the radios as IEEE 802.11b/g/n Wi-Fi plus the 915 MHz (US) and 868 MHz (EU) sub-GHz link to the alarms, with no Bluetooth

TP-Link Tapo H100: No
Catalog note
Infrared control is the separate Tapo H110 model, not the H100
X-Sense SBS50 Base Station: No

Matter bridge

TP-Link Tapo H100: Yes
Catalog note
TP-Link documents Matter Bridging on the H100 (Device Settings > Bind to Matter), which exposes its T100, T110, T310 and T315 sensors to other platforms; the T300 water leak sensor and the S200B/S200D buttons are not covered yet
X-Sense SBS50 Base Station: No
Catalog note
The CSA certified-products database lists only the separate SBS0A Matter base station for X-Sense; the SBS50 has no Matter certification and exposes its sub-devices through the X-Sense app instead

Third Party Devices

TP-Link Tapo H100: No
Catalog note
Pairs only Tapo Sub-G sensors, switches and buttons (up to 64); it is a Matter bridge for those, not a Matter controller for other brands.
X-Sense SBS50 Base Station: No
Catalog note
Links only X-Sense alarms and sensors (smoke, CO, combo, water leak, thermo-hygrometer) over its own 915/868 MHz radio, up to 50 devices; no other brands.

Thread border router

TP-Link Tapo H100: No
X-Sense SBS50 Base Station: No

Z Wave

TP-Link Tapo H100: No
X-Sense SBS50 Base Station: No

Zigbee coordinator

TP-Link Tapo H100: No
Catalog note
Sub-devices connect over TP-Link's own Sub-1G low-power radio (868 / 922 MHz), not Zigbee
X-Sense SBS50 Base Station: No
Catalog note
Sub-devices join over X-Sense's own Link+ Pro radio at 915 MHz (US) or 868 MHz (EU), not Zigbee

Sensors

Humidity

TP-Link Tapo H100: No
X-Sense SBS50 Base Station: No
Catalog note
Humidity comes from the paired thermo-hygrometers; the 0-85% RH figure is the base station's operating range

Light

TP-Link Tapo H100: No
X-Sense SBS50 Base Station: No
Catalog note
The three-colour LED is an indicator, not an ambient light sensor

Motion

TP-Link Tapo H100: No
X-Sense SBS50 Base Station: No
Catalog note
Motion is detected by the separate SMS0A sensor, which reports through the base station

Temperature

TP-Link Tapo H100: No
X-Sense SBS50 Base Station: No
Catalog note
The base station reads temperature only from the STH51 and STH0A thermo-hygrometers paired to it; the 4.4-37.8 C figure in its specifications is its own operating range, not a reading it takes

Specifications for TP-Link Tapo H100 versus X-Sense SBS50 Base Station
Specification	TP-Link Tapo H100	X-Sense SBS50 Base Station
Connectivity
2.4 GHz Wi-Fi	Yes Catalog note Official specification lists the wireless type as 2.4GHz Wi-Fi, which the hub requires	Yes Catalog note Official specifications list a 2.4 GHz Wi-Fi frequency and IEEE 802.11b/g/n as the wireless protocol
5 GHz Wi-Fi	No	No Catalog note X-Sense states the base station is compatible with 2.4 GHz Wi-Fi only and is not compatible with a 5 GHz network
Ethernet	No	No Catalog note Wi-Fi is the only uplink; the specifications list no wired network port
Features
Node Red	No	No
Onvif	No	No
RTSP	No	No
Subdevices	64 Catalog note Each Tapo Hub can connect up to a maximum of 64 devices, and the actual maximum may vary by device type	50 Catalog note X-Sense states one SBS50 manages up to 50 devices, with a cap of 10 STH51 thermo-hygrometers among them
Tailscale	No	No
Hardware
Cpu	Not recorded	Not recorded
Memory	Not recorded	Not recorded
Microphone	No	No Catalog note No microphone or voice feature is listed in the official specifications; the unit only signals with its LED and its sounder
microSD card slot	No	No Catalog note The base station relays alarms to the X-Sense cloud and has no card slot or local storage of any kind
Power Over Ethernet	No Catalog note Plugs straight into a mains outlet (AC 100~240V, 50/60Hz) and has no Ethernet port	No Catalog note Powered by its bundled adapter (input 100-240 V AC 50/60 Hz, output 5.0 V 1.0 A) and has no Ethernet port at all
Speakers	Yes Catalog note Built-in chime with 19 ringtones that doubles as a siren of up to 90 dB when a paired Tapo sensor triggers	Yes Catalog note Built-in sounder rated at 100 dB, adjustable, that sounds together with every connected alarm
Storage	Not recorded	Not recorded
Integrations
Alexa	Yes Catalog note TP-Link's Amazon Alexa setup guide lists the Tapo H100 under its Smart Hub applicable models	Yes Catalog note X-Sense tags its base-station devices as Alexa Compatible, and the Amazon listings for the SBS50 accessories (the SKP0A keypad, the SDS0A door sensor and the SMS0A motion sensor) state Compatible with Alexa, Requires SBS50 Base Station, so the base station is the Alexa bridge for the system
Apple Home	Yes Catalog note Via Matter. TP-Link states the H100 supports Matter Bridging, so the hub is added to Apple Home as a Matter bridge and its compatible sensors appear there; there is no native HomeKit profile	No Catalog note X-Sense claims no HomeKit support for this model, and the SBS50 is not Matter certified so it has no Matter path into Apple Home either
Google Home	Yes Catalog note TP-Link's Google Home setup guide lists the Tapo H100 under its Smart Hub applicable models	No Catalog note X-Sense advertises Alexa as the only voice platform for its base station line and claims no Google support on the product page or the collection listings
Home Assistant	Yes Catalog note The official TP-Link Smart Home integration lists H100 and H200 as supported Tapo hubs, together with the hub-connected S200B, S200D, T100, T110, T300, T310 and T315	Yes Catalog note X-Sense states that its Home Assistant compatibility runs through the SBS50 base station ecosystem, and the python-xsense library behind the community HACS integration maps SBS50 explicitly as a base station entity
SmartThings	Yes Catalog note Via Matter. TP-Link states the H100 supports Matter Bridging, so the hub is added to SmartThings as a Matter bridge and its compatible sensors appear there	No Catalog note X-Sense claims no SmartThings support for this model, and the SBS50 is not Matter certified so the automatic Works with SmartThings grant does not apply
Protocols
Bluetooth	No	No Catalog note The specifications enumerate the radios as IEEE 802.11b/g/n Wi-Fi plus the 915 MHz (US) and 868 MHz (EU) sub-GHz link to the alarms, with no Bluetooth
Ir	No Catalog note Infrared control is the separate Tapo H110 model, not the H100	No
Matter bridge	Yes Catalog note TP-Link documents Matter Bridging on the H100 (Device Settings > Bind to Matter), which exposes its T100, T110, T310 and T315 sensors to other platforms; the T300 water leak sensor and the S200B/S200D buttons are not covered yet	No Catalog note The CSA certified-products database lists only the separate SBS0A Matter base station for X-Sense; the SBS50 has no Matter certification and exposes its sub-devices through the X-Sense app instead
Third Party Devices	No Catalog note Pairs only Tapo Sub-G sensors, switches and buttons (up to 64); it is a Matter bridge for those, not a Matter controller for other brands.	No Catalog note Links only X-Sense alarms and sensors (smoke, CO, combo, water leak, thermo-hygrometer) over its own 915/868 MHz radio, up to 50 devices; no other brands.
Thread border router	No	No
Z Wave	No	No
Zigbee coordinator	No Catalog note Sub-devices connect over TP-Link's own Sub-1G low-power radio (868 / 922 MHz), not Zigbee	No Catalog note Sub-devices join over X-Sense's own Link+ Pro radio at 915 MHz (US) or 868 MHz (EU), not Zigbee
Sensors
Humidity	No	No Catalog note Humidity comes from the paired thermo-hygrometers; the 0-85% RH figure is the base station's operating range
Light	No	No Catalog note The three-colour LED is an indicator, not an ambient light sensor
Motion	No	No Catalog note Motion is detected by the separate SMS0A sensor, which reports through the base station
Temperature	No	No Catalog note The base station reads temperature only from the STH51 and STH0A thermo-hygrometers paired to it; the 4.4-37.8 C figure in its specifications is its own operating range, not a reading it takes

Know what’s behind the comparison.

The table matches specifications by section and field. It preserves notes, separates missing data from explicit “No” values, and keeps qualifications attached to their values. No overall winner is assigned from feature counts.

Read our comparison methodology