
Option 1 · Aqara
Aqara Single Switch Module T1 (No Neutral)
Last updated October 2026
View full device profileThe Smart Device Compare comparison
Understand the differences. Decide what matters to your home.
Build another comparison →Before you compare every specification
A summary of selected recorded differences between these relays. Check the full specification table below for details and conditions.
These observations are derived from recorded catalog data and have not all been independently verified. Confirm details with the manufacturer before purchasing.
Compare capabilities, compatibility and setup requirements.

Option 1 · Aqara
Last updated October 2026
View full device profile
Option 2 · Sonoff
Last updated October 2026
View full device profileWhat the catalog tells us
These counts describe the available data, not a quality score. More features do not automatically make a better device.
Consider your setup
Confirm which features appear in Apple Home and whether extra hardware or a subscription is needed for your intended use.
Inspect the specificationsConsider your setup
Confirm the exact device type and the features exposed in your chosen platform. Protocol support does not establish feature parity across apps.
Inspect the specificationsYour priorities, side by side
Mark the specifications you care about. Open manufacturer sources for verification scope; fields without citations remain catalog data. Expand notes for other qualifications.
Showing 46 of 46 rows. “Not recorded” does not mean “No”.
IEEE 802.11 b/g/n 2.4GHz
The manual's EU declaration of conformity lists BLE 2402-2480 MHz for this model, the transport Matter uses to commission a Wi-Fi device
Smart timers and scenes in eWeLink, plus HTTP, WebSocket and MQTT hooks for Home Assistant, OpenHAB, ioBroker and Node-RED
Indoor concealed installation: it mounts inside an electrical box
The manual's terminal table lists the two outputs as live wire output terminals, so the contact is not potential-free
The switch measures energy in both directions.
Sonoff MINI ONE PM Matter Over WiFi Smart Switch manufacturer product page →Observe installation and load-type restrictions.
Document check only; not a hands-on test or verification of every regional or firmware variant.
Bidirectional metering, so it reads solar generation as well as consumption, with a year of local data storage
A single press toggles the load; press and hold for pairing or factory reset
SONOFF's MINI-1GSP knowledge center documents OTA firmware updates, including over MQTT from Home Assistant
L Out carries the switched live wire to the load
Detached relay mode turns the wired wall switch into a smart trigger
Via Matter
Via Matter
Via Matter
Two paths: the manual documents adding it to Home Assistant via Matter, and SONOFF exposes local HTTP (JSON-RPC), WebSocket and MQTT APIs for it
Matter compatibility is specified.
Sonoff MINI ONE PM Matter Over WiFi Smart Switch manufacturer product page →Observe installation and load-type restrictions.
Document check only; not a hands-on test or verification of every regional or firmware variant.
Matter over Wi-Fi, the protocol the product is named for
Pairs directly with a SmartThings hub over Zigbee through SmartThings' own zigbee-switch Edge driver; also via Matter through an Aqara hub
Via Matter
Rated 16A 100-240V~ 50/60Hz, single-phase only
Mains AC only: the manual warns it is for single-phase 100-240V use
Even if your wall box doesn't have a neutral wire, the Aqara Single Switch Module T1 can be installed and used
SONOFF's product FAQ answers that the MINI-1GSP does require a neutral wire
The official rating states 16A max resistive load
The stated maximum load current is 16 A.
Sonoff MINI ONE PM Matter Over WiFi Smart Switch manufacturer product page →Observe installation and load-type restrictions.
Document check only; not a hands-on test or verification of every regional or firmware variant.
The relay cuts power when current, voltage, power or temperature passes its safe limit
| Specification | Aqara Single Switch Module T1 (No Neutral) | Sonoff MINI ONE PM Matter Over WiFi Smart Switch |
|---|---|---|
| Connectivity | ||
| No | YesCatalog noteIEEE 802.11 b/g/n 2.4GHz | |
| No | No | |
| No | For PairingCatalog noteThe manual's EU declaration of conformity lists BLE 2402-2480 MHz for this model, the transport Matter uses to commission a Wi-Fi device | |
| No | No | |
| No | No | |
| No | No | |
| Zigbee Hub required | No | |
| Features | ||
| Yes | YesCatalog noteSmart timers and scenes in eWeLink, plus HTTP, WebSocket and MQTT hooks for Home Assistant, OpenHAB, ioBroker and Node-RED | |
| No | NoCatalog noteIndoor concealed installation: it mounts inside an electrical box | |
| No | NoCatalog noteThe manual's terminal table lists the two outputs as live wire output terminals, so the contact is not potential-free | |
| No | YesManufacturer sourceThe switch measures energy in both directions. Sonoff MINI ONE PM Matter Over WiFi Smart Switch manufacturer product page →
Observe installation and load-type restrictions. Document check only; not a hands-on test or verification of every regional or firmware variant. Catalog noteBidirectional metering, so it reads solar generation as well as consumption, with a year of local data storage | |
| No | No | |
| Yes | YesCatalog noteA single press toggles the load; press and hold for pairing or factory reset | |
| Not recorded | YesCatalog noteSONOFF's MINI-1GSP knowledge center documents OTA firmware updates, including over MQTT from Home Assistant | |
| Yes | Yes | |
| 1 | 1 | |
| Yes | YesCatalog noteL Out carries the switched live wire to the load | |
| No | YesCatalog noteDetached relay mode turns the wired wall switch into a smart trigger | |
| No | No | |
| Integrations | ||
| Aqara Hub required | YesCatalog noteVia Matter | |
| Aqara Hub required | YesCatalog noteVia Matter | |
| Aqara Hub required | YesCatalog noteVia Matter | |
| Yes | YesCatalog noteTwo paths: the manual documents adding it to Home Assistant via Matter, and SONOFF exposes local HTTP (JSON-RPC), WebSocket and MQTT APIs for it | |
| Aqara Hub required | YesManufacturer sourceMatter compatibility is specified. Sonoff MINI ONE PM Matter Over WiFi Smart Switch manufacturer product page →
Observe installation and load-type restrictions. Document check only; not a hands-on test or verification of every regional or firmware variant. Catalog noteMatter over Wi-Fi, the protocol the product is named for | |
YesCatalog notePairs directly with a SmartThings hub over Zigbee through SmartThings' own zigbee-switch Edge driver; also via Matter through an Aqara hub | YesCatalog noteVia Matter | |
| Power | ||
| 100-250 V | 100-240V | |
| Yes | YesCatalog noteRated 16A 100-240V~ 50/60Hz, single-phase only | |
| No | Not recorded | |
| Not applicable / unspecified | Not recorded | |
| Not applicable / unspecified | Not recorded | |
| Not applicable / unspecified | Not applicable / unspecified | |
| Not applicable / unspecified | Not applicable / unspecified | |
| Not applicable / unspecified | Not applicable / unspecified | |
| No | NoCatalog noteMains AC only: the manual warns it is for single-phase 100-240V use | |
| Not recorded | Not recorded | |
| No | Not recorded | |
| Not applicable / unspecified | Not recorded | |
| Not applicable / unspecified | Not recorded | |
NoCatalog noteEven if your wall box doesn't have a neutral wire, the Aqara Single Switch Module T1 can be installed and used | YesCatalog noteSONOFF's product FAQ answers that the MINI-1GSP does require a neutral wire | |
| Yes | YesCatalog noteThe official rating states 16A max resistive load | |
| 5A | 16AManufacturer sourceThe stated maximum load current is 16 A. Sonoff MINI ONE PM Matter Over WiFi Smart Switch manufacturer product page →
Observe installation and load-type restrictions. Document check only; not a hands-on test or verification of every regional or firmware variant. | |
| 1250W | Not recorded | |
| Safety Features | ||
| No | Yes | |
| Yes | Yes | |
| No | YesCatalog noteThe relay cuts power when current, voltage, power or temperature passes its safe limit | |
| No | Yes | |
The table matches specifications by section and field. It preserves notes, separates missing data from explicit “No” values, and keeps qualifications attached to their values. No overall winner is assigned from feature counts.
Read our comparison methodology