
Option 1 · Sonoff
Sonoff MINI ONE PM Matter Over WiFi Smart Switch
Last updated October 2026
View full device profileThe Smart Device Compare comparison
Understand the differences. Decide what matters to your home.
Build another comparison →Before you compare every specification
A summary of selected recorded differences between these relays. Check the full specification table below for details and conditions.
These observations are derived from recorded catalog data and have not all been independently verified. Confirm details with the manufacturer before purchasing.
Compare capabilities, compatibility and setup requirements.

Option 1 · Sonoff
Last updated October 2026
View full device profile
Option 2 · Sonoff
Last updated October 2026
View full device profileWhat the catalog tells us
These counts describe the available data, not a quality score. More features do not automatically make a better device.
Consider your setup
Confirm which features appear in Apple Home and whether extra hardware or a subscription is needed for your intended use.
Inspect the specificationsConsider your setup
Confirm the exact device type and the features exposed in your chosen platform. Protocol support does not establish feature parity across apps.
Inspect the specificationsYour priorities, side by side
Mark the specifications you care about. Open manufacturer sources for verification scope; fields without citations remain catalog data. Expand notes for other qualifications.
Showing 46 of 46 rows. “Not recorded” does not mean “No”.
IEEE 802.11 b/g/n 2.4GHz
The manual's EU declaration of conformity lists BLE 2402-2480 MHz for this model, the transport Matter uses to commission a Wi-Fi device
Zigbee 3.0 (IEEE 802.15.4) on an EFR32MG21. A Zigbee hub or coordinator is required.
Smart timers and scenes in eWeLink, plus HTTP, WebSocket and MQTT hooks for Home Assistant, OpenHAB, ioBroker and Node-RED
Indoor concealed installation: it mounts inside an electrical box
The manual's terminal table lists the two outputs as live wire output terminals, so the contact is not potential-free
Normally open and normally closed dry-contact outputs are supported.
Sonoff MINI Dry Zigbee Smart Switch — manufacturer product description →Manufacturer description specifies 110–240 V AC or 12–48 V DC input. Do not infer switching capacity from input voltage.
Document check only; not a hands-on test or verification of every regional or firmware variant.
Potential-free NO/NC/COM output for garage doors, boilers, gates and solenoid valves.
The switch measures energy in both directions.
Sonoff MINI ONE PM Matter Over WiFi Smart Switch manufacturer product page →Observe installation and load-type restrictions.
Document check only; not a hands-on test or verification of every regional or firmware variant.
Bidirectional metering, so it reads solar generation as well as consumption, with a year of local data storage
A single press toggles the load; press and hold for pairing or factory reset
SONOFF's MINI-1GSP knowledge center documents OTA firmware updates, including over MQTT from Home Assistant
Zigbee2MQTT lists OTA updates for MINI-ZBD.
Zigbee2MQTT exposes power_on_behavior.
L Out carries the switched live wire to the load
Detached relay mode turns the wired wall switch into a smart trigger
Zigbee repeating is supported.
Sonoff MINI Dry Zigbee Smart Switch — manufacturer product description →Manufacturer description specifies 110–240 V AC or 12–48 V DC input. Do not infer switching capacity from input voltage.
Document check only; not a hands-on test or verification of every regional or firmware variant.
Mains-powered Zigbee 3.0 device that repeats mesh traffic as a router.
Via Matter
Works with Alexa through a Zigbee hub, as listed by SONOFF.
Via Matter
Via Matter
Voice control through a Zigbee hub and the eWeLink app, as listed by SONOFF.
Two paths: the manual documents adding it to Home Assistant via Matter, and SONOFF exposes local HTTP (JSON-RPC), WebSocket and MQTT APIs for it
Zigbee2MQTT documents model MINI-ZBD as a Zigbee smart switch with OTA, power-on behavior, detach relay, inching and turbo mode.
Matter compatibility is specified.
Sonoff MINI ONE PM Matter Over WiFi Smart Switch manufacturer product page →Observe installation and load-type restrictions.
Document check only; not a hands-on test or verification of every regional or firmware variant.
Matter over Wi-Fi, the protocol the product is named for
Zigbee 3.0 only. Matter over Wi-Fi is the sibling MINI-D.
Via Matter
SONOFF publishes a SmartThings driver invite for MINI-ZBD.
Rated 16A 100-240V~ 50/60Hz, single-phase only
100-240V AC 50/60Hz, 0.1A max, or 12-48V DC 1A max.
Mains AC only: the manual warns it is for single-phase 100-240V use
DC power input is supported.
Sonoff MINI Dry Zigbee Smart Switch — manufacturer product description →Manufacturer description specifies 110–240 V AC or 12–48 V DC input. Do not infer switching capacity from input voltage.
Document check only; not a hands-on test or verification of every regional or firmware variant.
SONOFF's product FAQ answers that the MINI-1GSP does require a neutral wire
The official rating states 16A max resistive load
The stated maximum load current is 16 A.
Sonoff MINI ONE PM Matter Over WiFi Smart Switch manufacturer product page →Observe installation and load-type restrictions.
Document check only; not a hands-on test or verification of every regional or firmware variant.
The relay cuts power when current, voltage, power or temperature passes its safe limit
| Specification | Sonoff MINI ONE PM Matter Over WiFi Smart Switch | Sonoff MINI Dry Zigbee Smart Switch |
|---|---|---|
| Connectivity | ||
YesCatalog noteIEEE 802.11 b/g/n 2.4GHz | No | |
| No | No | |
For PairingCatalog noteThe manual's EU declaration of conformity lists BLE 2402-2480 MHz for this model, the transport Matter uses to commission a Wi-Fi device | No | |
| No | No | |
| No | No | |
| No | No | |
| No | Zigbee Hub requiredCatalog noteZigbee 3.0 (IEEE 802.15.4) on an EFR32MG21. A Zigbee hub or coordinator is required. | |
| Features | ||
YesCatalog noteSmart timers and scenes in eWeLink, plus HTTP, WebSocket and MQTT hooks for Home Assistant, OpenHAB, ioBroker and Node-RED | Yes | |
NoCatalog noteIndoor concealed installation: it mounts inside an electrical box | No | |
NoCatalog noteThe manual's terminal table lists the two outputs as live wire output terminals, so the contact is not potential-free | YesManufacturer sourceNormally open and normally closed dry-contact outputs are supported. Sonoff MINI Dry Zigbee Smart Switch — manufacturer product description →
Manufacturer description specifies 110–240 V AC or 12–48 V DC input. Do not infer switching capacity from input voltage. Document check only; not a hands-on test or verification of every regional or firmware variant. Catalog notePotential-free NO/NC/COM output for garage doors, boilers, gates and solenoid valves. | |
YesManufacturer sourceThe switch measures energy in both directions. Sonoff MINI ONE PM Matter Over WiFi Smart Switch manufacturer product page →
Observe installation and load-type restrictions. Document check only; not a hands-on test or verification of every regional or firmware variant. Catalog noteBidirectional metering, so it reads solar generation as well as consumption, with a year of local data storage | No | |
| No | No | |
YesCatalog noteA single press toggles the load; press and hold for pairing or factory reset | Yes | |
YesCatalog noteSONOFF's MINI-1GSP knowledge center documents OTA firmware updates, including over MQTT from Home Assistant | YesCatalog noteZigbee2MQTT lists OTA updates for MINI-ZBD. | |
| Yes | YesCatalog noteZigbee2MQTT exposes power_on_behavior. | |
| 1 | 1 | |
YesCatalog noteL Out carries the switched live wire to the load | No | |
YesCatalog noteDetached relay mode turns the wired wall switch into a smart trigger | No | |
| No | YesManufacturer sourceZigbee repeating is supported. Sonoff MINI Dry Zigbee Smart Switch — manufacturer product description →
Manufacturer description specifies 110–240 V AC or 12–48 V DC input. Do not infer switching capacity from input voltage. Document check only; not a hands-on test or verification of every regional or firmware variant. Catalog noteMains-powered Zigbee 3.0 device that repeats mesh traffic as a router. | |
| Integrations | ||
YesCatalog noteVia Matter | YesCatalog noteWorks with Alexa through a Zigbee hub, as listed by SONOFF. | |
YesCatalog noteVia Matter | No | |
YesCatalog noteVia Matter | YesCatalog noteVoice control through a Zigbee hub and the eWeLink app, as listed by SONOFF. | |
YesCatalog noteTwo paths: the manual documents adding it to Home Assistant via Matter, and SONOFF exposes local HTTP (JSON-RPC), WebSocket and MQTT APIs for it | YesCatalog noteZigbee2MQTT documents model MINI-ZBD as a Zigbee smart switch with OTA, power-on behavior, detach relay, inching and turbo mode. | |
YesManufacturer sourceMatter compatibility is specified. Sonoff MINI ONE PM Matter Over WiFi Smart Switch manufacturer product page →
Observe installation and load-type restrictions. Document check only; not a hands-on test or verification of every regional or firmware variant. Catalog noteMatter over Wi-Fi, the protocol the product is named for | NoCatalog noteZigbee 3.0 only. Matter over Wi-Fi is the sibling MINI-D. | |
YesCatalog noteVia Matter | YesCatalog noteSONOFF publishes a SmartThings driver invite for MINI-ZBD. | |
| Power | ||
| 100-240V | 100-240 V | |
YesCatalog noteRated 16A 100-240V~ 50/60Hz, single-phase only | YesCatalog note100-240V AC 50/60Hz, 0.1A max, or 12-48V DC 1A max. | |
| Not recorded | No | |
| Not recorded | Not applicable / unspecified | |
| Not recorded | Not applicable / unspecified | |
| Not applicable / unspecified | 12-48V | |
| Not applicable / unspecified | 2A | |
| Not applicable / unspecified | 8W | |
NoCatalog noteMains AC only: the manual warns it is for single-phase 100-240V use | YesManufacturer sourceDC power input is supported. Sonoff MINI Dry Zigbee Smart Switch — manufacturer product description →
Manufacturer description specifies 110–240 V AC or 12–48 V DC input. Do not infer switching capacity from input voltage. Document check only; not a hands-on test or verification of every regional or firmware variant. | |
| Not recorded | Not recorded | |
| Not recorded | No | |
| Not recorded | Not applicable / unspecified | |
| Not recorded | Not applicable / unspecified | |
YesCatalog noteSONOFF's product FAQ answers that the MINI-1GSP does require a neutral wire | In AC input mode | |
YesCatalog noteThe official rating states 16A max resistive load | Yes | |
16AManufacturer sourceThe stated maximum load current is 16 A. Sonoff MINI ONE PM Matter Over WiFi Smart Switch manufacturer product page →
Observe installation and load-type restrictions. Document check only; not a hands-on test or verification of every regional or firmware variant. | 2A | |
| Not recorded | Not applicable / unspecified | |
| Safety Features | ||
| Yes | Not recorded | |
| Yes | Not recorded | |
YesCatalog noteThe relay cuts power when current, voltage, power or temperature passes its safe limit | Not recorded | |
| Yes | Not recorded | |
The table matches specifications by section and field. It preserves notes, separates missing data from explicit “No” values, and keeps qualifications attached to their values. No overall winner is assigned from feature counts.
Read our comparison methodology