The Smart Device Compare comparison
Aiper Scuba S3 vs Beatbot Sora 10
Understand the differences. Decide what matters to your home.
Build another comparison →Before you compare every specification
Key differences between Aiper Scuba S3 and Beatbot Sora 10
A summary of selected recorded differences between these robotic pool cleaners. Check the full specification table below for details and conditions.
Feature differences among your selected devices
- Dual Layer Filter (filtration): Aiper Scuba S3 — Yes; Beatbot Sora 10 — No.
- Above Ground Pools (pool compatibility): Aiper Scuba S3 — No; Beatbot Sora 10 — Yes.
Specifications to check side by side
- Brush System (cleaning performance): Aiper Scuba S3 — Dual active brushes; Beatbot Sora 10 — Dual front roller brushes.
- Cleaning Modes (cleaning performance): Aiper Scuba S3 — 5; Beatbot Sora 10 — 4.
- Suction Power (cleaning performance): Aiper Scuba S3 — 4800 GPH; Beatbot Sora 10 — 6800 GPH.
- Filter Capacity (filtration): Aiper Scuba S3 — 3.5 L; Beatbot Sora 10 — 5 L.
Information still to confirm
- 9 of 44 comparison fields lack a resolved value for at least one selected device. Missing information is not evidence that a feature is absent.
- Check the full table and manufacturer documentation before ruling out a device.
These observations are derived from recorded catalog data and have not all been independently verified. Confirm details with the manufacturer before purchasing.
Compare capabilities, compatibility and setup requirements.
What the catalog tells us
Understand the tradeoffs.
These counts describe the available data, not a quality score. More features do not automatically make a better device.
12differences with recorded values for every device
9rows with missing or unspecified information
Consider your setup
Battery Life
- Aiper Scuba S3240 minutes
- Beatbot Sora 10300 minutes
Compare the stated test conditions. Catalog battery figures alone do not predict runtime in your home.
Inspect the specificationsYour priorities, side by side
Focus on what changes.
Mark the specifications you care about. Open manufacturer sources for verification scope; fields without citations remain catalog data. Expand notes for other qualifications.
Showing 44 of 44 rows. “Not recorded” does not mean “No”.
Cleaning Coverage
- Aiper Scuba S3
- Yes
- Beatbot Sora 10
- Yes
- Aiper Scuba S3
- Not recorded
- Beatbot Sora 10
- Yes
- Aiper Scuba S3
- Yes
- Beatbot Sora 10
- Yes
- Aiper Scuba S3
- No
- Beatbot Sora 10
- No
- Aiper Scuba S3
- Yes
Manufacturer source
The cleaner supports waterline cleaning.
Aiper Scuba S3 manufacturer product page →- Source section
- Product description
- Model
- Aiper Scuba S3
- Region
- US manufacturer page
- Firmware
- Not specified by this source
- Checked
Flow rate is not suction pressure. Runtime depends on cleaning mode and pool conditions.
Document check only; not a hands-on test or verification of every regional or firmware variant.
- Beatbot Sora 10
- Yes
Cleaning Performance
- Aiper Scuba S3
- Dual active brushes
- Beatbot Sora 10
- Dual front roller brushes
- Aiper Scuba S3
- 5
- Beatbot Sora 10
- 4
- Aiper Scuba S3
- Not recorded
- Beatbot Sora 10
- Not recorded
- Aiper Scuba S3
- 4800 GPH
Manufacturer source
The advertised pump flow is 4,800 US gallons per hour.
Aiper Scuba S3 manufacturer product page →- Source section
- Product description
- Model
- Aiper Scuba S3
- Region
- US manufacturer page
- Firmware
- Not specified by this source
- Checked
Flow rate is not suction pressure. Runtime depends on cleaning mode and pool conditions.
Document check only; not a hands-on test or verification of every regional or firmware variant.
- Beatbot Sora 10
- 6800 GPH
Connectivity
- Aiper Scuba S3
- Yes
- Beatbot Sora 10
- Yes
- Aiper Scuba S3
- Yes
- Beatbot Sora 10
- Yes
- Aiper Scuba S3
- Not applicable / unspecified
- Beatbot Sora 10
- Not applicable / unspecified
Features
- Aiper Scuba S3
- Yes
- Beatbot Sora 10
- Yes
- Aiper Scuba S3
- No
- Beatbot Sora 10
- No
- Aiper Scuba S3
- Yes
- Beatbot Sora 10
- Not recorded
- Aiper Scuba S3
- Not recorded
- Beatbot Sora 10
- Not recorded
- Aiper Scuba S3
- Yes
- Beatbot Sora 10
- Not recorded
Filtration
- Aiper Scuba S3
- Yes
- Beatbot Sora 10
- No
- Aiper Scuba S3
- 3.5 L
- Beatbot Sora 10
- 5 L
- Aiper Scuba S3
- 3 µm
- Beatbot Sora 10
- 150 µm
- Aiper Scuba S3
- Not recorded
- Beatbot Sora 10
- Not recorded
- Aiper Scuba S3
- Yes
- Beatbot Sora 10
- Not recorded
Integrations
- Aiper Scuba S3
- No
- Beatbot Sora 10
- No
- Aiper Scuba S3
- No
- Beatbot Sora 10
- No
- Aiper Scuba S3
- No
- Beatbot Sora 10
- No
- Aiper Scuba S3
- No
- Beatbot Sora 10
- No
- Aiper Scuba S3
- No
- Beatbot Sora 10
- No
- Aiper Scuba S3
- No
- Beatbot Sora 10
- No
Navigation
- Aiper Scuba S3
- No
- Beatbot Sora 10
- No
- Aiper Scuba S3
- Yes
- Beatbot Sora 10
- Yes
- Aiper Scuba S3
- WavePath 2.0 path planning with dToF sensing
- Beatbot Sora 10
- SonicSense sensor fusion (11 sensors)
- Aiper Scuba S3
- Yes
- Beatbot Sora 10
- Yes
- Aiper Scuba S3
- No
- Beatbot Sora 10
- No
- Aiper Scuba S3
- Yes
- Beatbot Sora 10
- Yes
Pool Compatibility
- Aiper Scuba S3
- No
- Beatbot Sora 10
- Yes
- Aiper Scuba S3
- Yes
- Beatbot Sora 10
- Yes
- Aiper Scuba S3
- 1650 sq ft
- Beatbot Sora 10
- 3299 sq ft
Power
- Aiper Scuba S3
- 10400mAh
- Beatbot Sora 10
- 7800 mAh
- Aiper Scuba S3
- 240 minutes
Manufacturer source
The advertised runtime is up to 240 minutes.
Aiper Scuba S3 manufacturer product page →- Source section
- Product description
- Model
- Aiper Scuba S3
- Region
- US manufacturer page
- Firmware
- Not specified by this source
- Checked
Flow rate is not suction pressure. Runtime depends on cleaning mode and pool conditions.
Document check only; not a hands-on test or verification of every regional or firmware variant.
- Beatbot Sora 10
- 300 minutes
- Aiper Scuba S3
- Not applicable / unspecified
- Beatbot Sora 10
- Not applicable / unspecified
- Aiper Scuba S3
- No
- Beatbot Sora 10
- No
- Aiper Scuba S3
- 4 hours
- Beatbot Sora 10
- 3.5 hours
- Aiper Scuba S3
- Yes
- Beatbot Sora 10
- Yes
- Aiper Scuba S3
- No
- Beatbot Sora 10
- No
| Specification | Aiper Scuba S3 | Beatbot Sora 10 |
|---|---|---|
| Cleaning Coverage | ||
| Yes | Yes | |
| Not recorded | Yes | |
| Yes | Yes | |
| No | No | |
YesManufacturer sourceThe cleaner supports waterline cleaning. Aiper Scuba S3 manufacturer product page →
Flow rate is not suction pressure. Runtime depends on cleaning mode and pool conditions. Document check only; not a hands-on test or verification of every regional or firmware variant. | Yes | |
| Cleaning Performance | ||
| Dual active brushes | Dual front roller brushes | |
| 5 | 4 | |
| Not recorded | Not recorded | |
4800 GPHManufacturer sourceThe advertised pump flow is 4,800 US gallons per hour. Aiper Scuba S3 manufacturer product page →
Flow rate is not suction pressure. Runtime depends on cleaning mode and pool conditions. Document check only; not a hands-on test or verification of every regional or firmware variant. | 6800 GPH | |
| Connectivity | ||
| Yes | Yes | |
| Yes | Yes | |
| Not applicable / unspecified | Not applicable / unspecified | |
| Features | ||
| Yes | Yes | |
| No | No | |
| Yes | Not recorded | |
| Not recorded | Not recorded | |
| Yes | Not recorded | |
| Filtration | ||
| Yes | No | |
| 3.5 L | 5 L | |
| 3 µm | 150 µm | |
| Not recorded | Not recorded | |
| Yes | Not recorded | |
| Integrations | ||
| No | No | |
| No | No | |
| No | No | |
| No | No | |
| No | No | |
| No | No | |
| Navigation | ||
| No | No | |
| Yes | Yes | |
| WavePath 2.0 path planning with dToF sensing | SonicSense sensor fusion (11 sensors) | |
| Yes | Yes | |
| No | No | |
| Yes | Yes | |
| Pool Compatibility | ||
| No | Yes | |
| Yes | Yes | |
| 1650 sq ft | 3299 sq ft | |
| Power | ||
| 10400mAh | 7800 mAh | |
240 minutesManufacturer sourceThe advertised runtime is up to 240 minutes. Aiper Scuba S3 manufacturer product page →
Flow rate is not suction pressure. Runtime depends on cleaning mode and pool conditions. Document check only; not a hands-on test or verification of every regional or firmware variant. | 300 minutes | |
| Not applicable / unspecified | Not applicable / unspecified | |
| No | No | |
| 4 hours | 3.5 hours | |
| Yes | Yes | |
| No | No | |
Know what’s behind the comparison.
The table matches specifications by section and field. It preserves notes, separates missing data from explicit “No” values, and keeps qualifications attached to their values. No overall winner is assigned from feature counts.
Read our comparison methodology