The Smart Device Compare comparison
Aiper Scuba S3 vs Dreame Z1 Pro
Understand the differences. Decide what matters to your home.
Build another comparison →Before you compare every specification
Key differences between Aiper Scuba S3 and Dreame Z1 Pro
A summary of selected recorded differences between these robotic pool cleaners. Check the full specification table below for details and conditions.
Feature differences among your selected devices
- Dual Layer Filter (filtration): Aiper Scuba S3 — Yes; Dreame Z1 Pro — No.
- Above Ground Pools (pool compatibility): Aiper Scuba S3 — No; Dreame Z1 Pro — Yes.
Specifications to check side by side
- Brush System (cleaning performance): Aiper Scuba S3 — Dual active brushes; Dreame Z1 Pro — Dual roller brushes.
- Cleaning Modes (cleaning performance): Aiper Scuba S3 — 5; Dreame Z1 Pro — 4.
- Suction Power (cleaning performance): Aiper Scuba S3 — 4800 GPH; Dreame Z1 Pro — 8000 GPH.
- Filter Fineness (filtration): Aiper Scuba S3 — 3 µm; Dreame Z1 Pro — 180 µm.
Information still to confirm
- 11 of 44 comparison fields lack a resolved value for at least one selected device. Missing information is not evidence that a feature is absent.
- Check the full table and manufacturer documentation before ruling out a device.
These observations are derived from recorded catalog data and have not all been independently verified. Confirm details with the manufacturer before purchasing.
Compare capabilities, compatibility and setup requirements.
What the catalog tells us
Understand the tradeoffs.
These counts describe the available data, not a quality score. More features do not automatically make a better device.
11differences with recorded values for every device
11rows with missing or unspecified information
Consider your setup
Battery Life
- Aiper Scuba S3240 minutes
- Dreame Z1 Pro180 minutes
Compare the stated test conditions. Catalog battery figures alone do not predict runtime in your home.
Inspect the specificationsYour priorities, side by side
Focus on what changes.
Mark the specifications you care about. Open manufacturer sources for verification scope; fields without citations remain catalog data. Expand notes for other qualifications.
Showing 44 of 44 rows. “Not recorded” does not mean “No”.
Cleaning Coverage
- Aiper Scuba S3
- Yes
- Dreame Z1 Pro
- Yes
- Aiper Scuba S3
- Not recorded
- Dreame Z1 Pro
- Yes
- Aiper Scuba S3
- Yes
- Dreame Z1 Pro
- Yes
- Aiper Scuba S3
- No
- Dreame Z1 Pro
- No
- Aiper Scuba S3
- Yes
Manufacturer source
The cleaner supports waterline cleaning.
Aiper Scuba S3 manufacturer product page →- Source section
- Product description
- Model
- Aiper Scuba S3
- Region
- US manufacturer page
- Firmware
- Not specified by this source
- Checked
Flow rate is not suction pressure. Runtime depends on cleaning mode and pool conditions.
Document check only; not a hands-on test or verification of every regional or firmware variant.
- Dreame Z1 Pro
- Yes
Cleaning Performance
- Aiper Scuba S3
- Dual active brushes
- Dreame Z1 Pro
- Dual roller brushes
- Aiper Scuba S3
- 5
- Dreame Z1 Pro
- 4
- Aiper Scuba S3
- Not recorded
- Dreame Z1 Pro
- Yes
- Aiper Scuba S3
- 4800 GPH
Manufacturer source
The advertised pump flow is 4,800 US gallons per hour.
Aiper Scuba S3 manufacturer product page →- Source section
- Product description
- Model
- Aiper Scuba S3
- Region
- US manufacturer page
- Firmware
- Not specified by this source
- Checked
Flow rate is not suction pressure. Runtime depends on cleaning mode and pool conditions.
Document check only; not a hands-on test or verification of every regional or firmware variant.
- Dreame Z1 Pro
- 8000 GPH
Connectivity
- Aiper Scuba S3
- Yes
- Dreame Z1 Pro
- Yes
- Aiper Scuba S3
- Yes
- Dreame Z1 Pro
- Not recorded
- Aiper Scuba S3
- Not applicable / unspecified
- Dreame Z1 Pro
- LiFi underwater remote link
Features
- Aiper Scuba S3
- Yes
- Dreame Z1 Pro
- Yes
- Aiper Scuba S3
- No
- Dreame Z1 Pro
- No
- Aiper Scuba S3
- Yes
- Dreame Z1 Pro
- Yes
- Aiper Scuba S3
- Not recorded
- Dreame Z1 Pro
- Yes
- Aiper Scuba S3
- Yes
- Dreame Z1 Pro
- Not recorded
Filtration
- Aiper Scuba S3
- Yes
- Dreame Z1 Pro
- No
- Aiper Scuba S3
- 3.5 L
- Dreame Z1 Pro
- Not recorded
- Aiper Scuba S3
- 3 µm
- Dreame Z1 Pro
- 180 µm
- Aiper Scuba S3
- Not recorded
- Dreame Z1 Pro
- Not recorded
- Aiper Scuba S3
- Yes
- Dreame Z1 Pro
- Not recorded
Integrations
- Aiper Scuba S3
- No
- Dreame Z1 Pro
- No
- Aiper Scuba S3
- No
- Dreame Z1 Pro
- No
- Aiper Scuba S3
- No
- Dreame Z1 Pro
- No
- Aiper Scuba S3
- No
- Dreame Z1 Pro
- No
- Aiper Scuba S3
- No
- Dreame Z1 Pro
- No
- Aiper Scuba S3
- No
- Dreame Z1 Pro
- No
Navigation
- Aiper Scuba S3
- No
- Dreame Z1 Pro
- No
- Aiper Scuba S3
- Yes
- Dreame Z1 Pro
- Yes
- Aiper Scuba S3
- WavePath 2.0 path planning with dToF sensing
- Dreame Z1 Pro
- PoolSense ultrasound + 3D structured light
- Aiper Scuba S3
- Yes
- Dreame Z1 Pro
- Not recorded
- Aiper Scuba S3
- No
- Dreame Z1 Pro
- No
- Aiper Scuba S3
- Yes
- Dreame Z1 Pro
- Yes
Pool Compatibility
- Aiper Scuba S3
- No
- Dreame Z1 Pro
- Yes
- Aiper Scuba S3
- Yes
- Dreame Z1 Pro
- Yes
- Aiper Scuba S3
- 1650 sq ft
- Dreame Z1 Pro
- 2160 sq ft
Power
- Aiper Scuba S3
- 10400mAh
- Dreame Z1 Pro
- 9600 mAh
- Aiper Scuba S3
- 240 minutes
Manufacturer source
The advertised runtime is up to 240 minutes.
Aiper Scuba S3 manufacturer product page →- Source section
- Product description
- Model
- Aiper Scuba S3
- Region
- US manufacturer page
- Firmware
- Not specified by this source
- Checked
Flow rate is not suction pressure. Runtime depends on cleaning mode and pool conditions.
Document check only; not a hands-on test or verification of every regional or firmware variant.
- Dreame Z1 Pro
- 180 minutes
- Aiper Scuba S3
- Not applicable / unspecified
- Dreame Z1 Pro
- Not applicable / unspecified
- Aiper Scuba S3
- No
- Dreame Z1 Pro
- No
- Aiper Scuba S3
- 4 hours
- Dreame Z1 Pro
- 4-6 hours
- Aiper Scuba S3
- Yes
- Dreame Z1 Pro
- Yes
- Aiper Scuba S3
- No
- Dreame Z1 Pro
- No
| Specification | Aiper Scuba S3 | Dreame Z1 Pro |
|---|---|---|
| Cleaning Coverage | ||
| Yes | Yes | |
| Not recorded | Yes | |
| Yes | Yes | |
| No | No | |
YesManufacturer sourceThe cleaner supports waterline cleaning. Aiper Scuba S3 manufacturer product page →
Flow rate is not suction pressure. Runtime depends on cleaning mode and pool conditions. Document check only; not a hands-on test or verification of every regional or firmware variant. | Yes | |
| Cleaning Performance | ||
| Dual active brushes | Dual roller brushes | |
| 5 | 4 | |
| Not recorded | Yes | |
4800 GPHManufacturer sourceThe advertised pump flow is 4,800 US gallons per hour. Aiper Scuba S3 manufacturer product page →
Flow rate is not suction pressure. Runtime depends on cleaning mode and pool conditions. Document check only; not a hands-on test or verification of every regional or firmware variant. | 8000 GPH | |
| Connectivity | ||
| Yes | Yes | |
| Yes | Not recorded | |
| Not applicable / unspecified | LiFi underwater remote link | |
| Features | ||
| Yes | Yes | |
| No | No | |
| Yes | Yes | |
| Not recorded | Yes | |
| Yes | Not recorded | |
| Filtration | ||
| Yes | No | |
| 3.5 L | Not recorded | |
| 3 µm | 180 µm | |
| Not recorded | Not recorded | |
| Yes | Not recorded | |
| Integrations | ||
| No | No | |
| No | No | |
| No | No | |
| No | No | |
| No | No | |
| No | No | |
| Navigation | ||
| No | No | |
| Yes | Yes | |
| WavePath 2.0 path planning with dToF sensing | PoolSense ultrasound + 3D structured light | |
| Yes | Not recorded | |
| No | No | |
| Yes | Yes | |
| Pool Compatibility | ||
| No | Yes | |
| Yes | Yes | |
| 1650 sq ft | 2160 sq ft | |
| Power | ||
| 10400mAh | 9600 mAh | |
240 minutesManufacturer sourceThe advertised runtime is up to 240 minutes. Aiper Scuba S3 manufacturer product page →
Flow rate is not suction pressure. Runtime depends on cleaning mode and pool conditions. Document check only; not a hands-on test or verification of every regional or firmware variant. | 180 minutes | |
| Not applicable / unspecified | Not applicable / unspecified | |
| No | No | |
| 4 hours | 4-6 hours | |
| Yes | Yes | |
| No | No | |
Know what’s behind the comparison.
The table matches specifications by section and field. It preserves notes, separates missing data from explicit “No” values, and keeps qualifications attached to their values. No overall winner is assigned from feature counts.
Read our comparison methodology