The Smart Device Compare comparison
Aiper Scuba S3 vs ECOVACS Ultramarine P1
Understand the differences. Decide what matters to your home.
Build another comparison →Before you compare every specification
Key differences between Aiper Scuba S3 and ECOVACS Ultramarine P1
A summary of selected recorded differences between these robotic pool cleaners. Check the full specification table below for details and conditions.
Feature differences among your selected devices
- Waterline Cleaning (cleaning coverage): Aiper Scuba S3 — Yes; ECOVACS Ultramarine P1 — No.
- Ultrasonic Mapping (navigation): Aiper Scuba S3 — Yes; ECOVACS Ultramarine P1 — No.
- Above Ground Pools (pool compatibility): Aiper Scuba S3 — No; ECOVACS Ultramarine P1 — Yes.
Specifications to check side by side
- Brush System (cleaning performance): Aiper Scuba S3 — Dual active brushes; ECOVACS Ultramarine P1 — 4 synchronized roller brushes.
- Cleaning Modes (cleaning performance): Aiper Scuba S3 — 5; ECOVACS Ultramarine P1 — 3.
- Navigation Type (navigation): Aiper Scuba S3 — WavePath 2.0 path planning with dToF sensing; ECOVACS Ultramarine P1 — SmartNavi IMU mapping.
- Max Pool Area (pool compatibility): Aiper Scuba S3 — 1650 sq ft; ECOVACS Ultramarine P1 — 1937 sq ft.
Information still to confirm
- 12 of 44 comparison fields lack a resolved value for at least one selected device. Missing information is not evidence that a feature is absent.
- Check the full table and manufacturer documentation before ruling out a device.
These observations are derived from recorded catalog data and have not all been independently verified. Confirm details with the manufacturer before purchasing.
Compare capabilities, compatibility and setup requirements.
What the catalog tells us
Understand the tradeoffs.
These counts describe the available data, not a quality score. More features do not automatically make a better device.
9differences with recorded values for every device
12rows with missing or unspecified information
Consider your setup
Battery Life
- Aiper Scuba S3240 minutes
- ECOVACS Ultramarine P1180 minutes
Compare the stated test conditions. Catalog battery figures alone do not predict runtime in your home.
Inspect the specificationsYour priorities, side by side
Focus on what changes.
Mark the specifications you care about. Open manufacturer sources for verification scope; fields without citations remain catalog data. Expand notes for other qualifications.
Showing 44 of 44 rows. “Not recorded” does not mean “No”.
Cleaning Coverage
- Aiper Scuba S3
- Yes
- ECOVACS Ultramarine P1
- Yes
- Aiper Scuba S3
- Not recorded
- ECOVACS Ultramarine P1
- Not recorded
- Aiper Scuba S3
- Yes
- ECOVACS Ultramarine P1
- Yes
- Aiper Scuba S3
- No
- ECOVACS Ultramarine P1
- No
- Aiper Scuba S3
- Yes
Manufacturer source
The cleaner supports waterline cleaning.
Aiper Scuba S3 manufacturer product page →- Source section
- Product description
- Model
- Aiper Scuba S3
- Region
- US manufacturer page
- Firmware
- Not specified by this source
- Checked
Flow rate is not suction pressure. Runtime depends on cleaning mode and pool conditions.
Document check only; not a hands-on test or verification of every regional or firmware variant.
- ECOVACS Ultramarine P1
- No
Cleaning Performance
- Aiper Scuba S3
- Dual active brushes
- ECOVACS Ultramarine P1
- 4 synchronized roller brushes
- Aiper Scuba S3
- 5
- ECOVACS Ultramarine P1
- 3
- Aiper Scuba S3
- Not recorded
- ECOVACS Ultramarine P1
- Not recorded
- Aiper Scuba S3
- 4800 GPH
Manufacturer source
The advertised pump flow is 4,800 US gallons per hour.
Aiper Scuba S3 manufacturer product page →- Source section
- Product description
- Model
- Aiper Scuba S3
- Region
- US manufacturer page
- Firmware
- Not specified by this source
- Checked
Flow rate is not suction pressure. Runtime depends on cleaning mode and pool conditions.
Document check only; not a hands-on test or verification of every regional or firmware variant.
- ECOVACS Ultramarine P1
- 4800 GPH
Connectivity
- Aiper Scuba S3
- Yes
- ECOVACS Ultramarine P1
- Yes
- Aiper Scuba S3
- Yes
- ECOVACS Ultramarine P1
- Not recorded
- Aiper Scuba S3
- Not applicable / unspecified
- ECOVACS Ultramarine P1
- Not applicable / unspecified
Features
- Aiper Scuba S3
- Yes
- ECOVACS Ultramarine P1
- Yes
- Aiper Scuba S3
- No
- ECOVACS Ultramarine P1
- No
- Aiper Scuba S3
- Yes
- ECOVACS Ultramarine P1
- Not recorded
- Aiper Scuba S3
- Not recorded
- ECOVACS Ultramarine P1
- Not recorded
- Aiper Scuba S3
- Yes
- ECOVACS Ultramarine P1
- Yes
Filtration
- Aiper Scuba S3
- Yes
- ECOVACS Ultramarine P1
- Yes
- Aiper Scuba S3
- 3.5 L
- ECOVACS Ultramarine P1
- Not recorded
- Aiper Scuba S3
- 3 µm
- ECOVACS Ultramarine P1
- 3 µm
- Aiper Scuba S3
- Not recorded
- ECOVACS Ultramarine P1
- Not recorded
- Aiper Scuba S3
- Yes
- ECOVACS Ultramarine P1
- Not recorded
Integrations
- Aiper Scuba S3
- No
- ECOVACS Ultramarine P1
- No
- Aiper Scuba S3
- No
- ECOVACS Ultramarine P1
- No
- Aiper Scuba S3
- No
- ECOVACS Ultramarine P1
- No
- Aiper Scuba S3
- No
- ECOVACS Ultramarine P1
- No
- Aiper Scuba S3
- No
- ECOVACS Ultramarine P1
- No
- Aiper Scuba S3
- No
- ECOVACS Ultramarine P1
- No
Navigation
- Aiper Scuba S3
- No
- ECOVACS Ultramarine P1
- No
- Aiper Scuba S3
- Yes
- ECOVACS Ultramarine P1
- Not recorded
- Aiper Scuba S3
- WavePath 2.0 path planning with dToF sensing
- ECOVACS Ultramarine P1
- SmartNavi IMU mapping
- Aiper Scuba S3
- Yes
- ECOVACS Ultramarine P1
- Yes
- Aiper Scuba S3
- No
- ECOVACS Ultramarine P1
- No
- Aiper Scuba S3
- Yes
- ECOVACS Ultramarine P1
- No
Pool Compatibility
- Aiper Scuba S3
- No
- ECOVACS Ultramarine P1
- Yes
- Aiper Scuba S3
- Yes
- ECOVACS Ultramarine P1
- Yes
- Aiper Scuba S3
- 1650 sq ft
- ECOVACS Ultramarine P1
- 1937 sq ft
Power
- Aiper Scuba S3
- 10400mAh
- ECOVACS Ultramarine P1
- 4600 mAh
- Aiper Scuba S3
- 240 minutes
Manufacturer source
The advertised runtime is up to 240 minutes.
Aiper Scuba S3 manufacturer product page →- Source section
- Product description
- Model
- Aiper Scuba S3
- Region
- US manufacturer page
- Firmware
- Not specified by this source
- Checked
Flow rate is not suction pressure. Runtime depends on cleaning mode and pool conditions.
Document check only; not a hands-on test or verification of every regional or firmware variant.
- ECOVACS Ultramarine P1
- 180 minutes
- Aiper Scuba S3
- Not applicable / unspecified
- ECOVACS Ultramarine P1
- Not applicable / unspecified
- Aiper Scuba S3
- No
- ECOVACS Ultramarine P1
- No
- Aiper Scuba S3
- 4 hours
- ECOVACS Ultramarine P1
- Not recorded
- Aiper Scuba S3
- Yes
- ECOVACS Ultramarine P1
- Yes
- Aiper Scuba S3
- No
- ECOVACS Ultramarine P1
- No
| Specification | Aiper Scuba S3 | ECOVACS Ultramarine P1 |
|---|---|---|
| Cleaning Coverage | ||
| Yes | Yes | |
| Not recorded | Not recorded | |
| Yes | Yes | |
| No | No | |
YesManufacturer sourceThe cleaner supports waterline cleaning. Aiper Scuba S3 manufacturer product page →
Flow rate is not suction pressure. Runtime depends on cleaning mode and pool conditions. Document check only; not a hands-on test or verification of every regional or firmware variant. | No | |
| Cleaning Performance | ||
| Dual active brushes | 4 synchronized roller brushes | |
| 5 | 3 | |
| Not recorded | Not recorded | |
4800 GPHManufacturer sourceThe advertised pump flow is 4,800 US gallons per hour. Aiper Scuba S3 manufacturer product page →
Flow rate is not suction pressure. Runtime depends on cleaning mode and pool conditions. Document check only; not a hands-on test or verification of every regional or firmware variant. | 4800 GPH | |
| Connectivity | ||
| Yes | Yes | |
| Yes | Not recorded | |
| Not applicable / unspecified | Not applicable / unspecified | |
| Features | ||
| Yes | Yes | |
| No | No | |
| Yes | Not recorded | |
| Not recorded | Not recorded | |
| Yes | Yes | |
| Filtration | ||
| Yes | Yes | |
| 3.5 L | Not recorded | |
| 3 µm | 3 µm | |
| Not recorded | Not recorded | |
| Yes | Not recorded | |
| Integrations | ||
| No | No | |
| No | No | |
| No | No | |
| No | No | |
| No | No | |
| No | No | |
| Navigation | ||
| No | No | |
| Yes | Not recorded | |
| WavePath 2.0 path planning with dToF sensing | SmartNavi IMU mapping | |
| Yes | Yes | |
| No | No | |
| Yes | No | |
| Pool Compatibility | ||
| No | Yes | |
| Yes | Yes | |
| 1650 sq ft | 1937 sq ft | |
| Power | ||
| 10400mAh | 4600 mAh | |
240 minutesManufacturer sourceThe advertised runtime is up to 240 minutes. Aiper Scuba S3 manufacturer product page →
Flow rate is not suction pressure. Runtime depends on cleaning mode and pool conditions. Document check only; not a hands-on test or verification of every regional or firmware variant. | 180 minutes | |
| Not applicable / unspecified | Not applicable / unspecified | |
| No | No | |
| 4 hours | Not recorded | |
| Yes | Yes | |
| No | No | |
Know what’s behind the comparison.
The table matches specifications by section and field. It preserves notes, separates missing data from explicit “No” values, and keeps qualifications attached to their values. No overall winner is assigned from feature counts.
Read our comparison methodology