
The Smart Device Compare comparison
Shelly BLU H&T ZB vs Sonoff SNZB-02UL AirGuard E-Ink TH
Understand the differences. Decide what matters to your home.
Build another comparison →Before you compare every specification
Key differences between Shelly BLU H&T ZB and Sonoff SNZB-02UL AirGuard E-Ink TH
A summary of selected recorded differences between these temperature & humidity sensors. Check the full specification table below for details and conditions.
- Bluetooth (connectivity): Shelly BLU H&T ZB — Yes (Bluetooth 5 (LE) on 2402 to 2480 MHz with under 8 dBm of RF power, the radio a Shelly Bluetooth gateway reads the sensor through.); Sonoff SNZB-02UL AirGuard E-Ink TH — No.
- Screen (display): Shelly BLU H&T ZB — No (This is the display-less model: its only output is a single red LED, and readings are delivered over Bluetooth or Zigbee. The sibling Shelly BLU H&T Display ZB (SBHT-103C) is the e-paper version.); Sonoff SNZB-02UL AirGuard E-Ink TH — Yes (2.9 inch flexible dot-matrix E-Ink panel with a nearly 180 degree viewing angle, readable in bright light. Without a gateway it shows temperature and humidity plus the past 6 hours on a button press.).
- Alexa (integrations): Shelly BLU H&T ZB — Shelly gateway required (Reached through the Shelly Smart Control account, which the product page lists alongside Google Home, Home Assistant and Samsung SmartThings, and which needs a gateway on the network for this sensor: the Shelly BLU Gateway, or any Shelly Plus, Pro, Gen3 or Gen4 device other than a sensor.); Sonoff SNZB-02UL AirGuard E-Ink TH — Yes (SONOFF lists Alexa temperature and humidity queries, and an Echo with a built-in Zigbee hub (Echo Plus 2nd, Echo 4th, Echo Show 2nd) as a compatible gateway.).
- Apple Home (integrations): Shelly BLU H&T ZB — No (The device documentation lists only Bluetooth 5 LE and Zigbee 802.15.4 with no Matter or HomeKit profile, and the platforms Shelly names for it are Alexa, Google Home, Home Assistant and Samsung SmartThings.); Sonoff SNZB-02UL AirGuard E-Ink TH — SONOFF Hub required (The device is Zigbee, not HomeKit. SONOFF republishes it into the Apple Home app through its own Matter bridges (Bridge-M, ZBBridge-U, iHost, eWeLink CUBE).).
- Google Home (integrations): Shelly BLU H&T ZB — Shelly gateway required (Reached through the Shelly Smart Control account, which the product page lists alongside Alexa, Home Assistant and Samsung SmartThings, and which needs a gateway on the network for this sensor: the Shelly BLU Gateway, or any Shelly Plus, Pro, Gen3 or Gen4 device other than a sensor.); Sonoff SNZB-02UL AirGuard E-Ink TH — Yes (SONOFF lists a Google Home temperature and humidity voice query, reached through the eWeLink cloud-to-cloud link.).
- Matter (integrations): Shelly BLU H&T ZB — No (The device documentation lists only Bluetooth 5 (LE) and Zigbee 802.15.4 as its radios, with no Matter profile. The FAQ on the product page presents Matter as a Gen3 and Gen4 feature, and this is a BLU battery sensor.); Sonoff SNZB-02UL AirGuard E-Ink TH — SONOFF Hub required (Not a Matter device itself: SONOFF bridges it into Matter through the Bridge-M, ZBBridge-U, iHost or eWeLink CUBE.).
- 10 of 35 comparison fields lack a resolved value for at least one selected device. Missing information is not evidence that a feature is absent.
- Check the full table and manufacturer documentation before ruling out a device.
These observations are derived from recorded catalog data and have not all been independently verified. Confirm details with the manufacturer before purchasing.
Compare capabilities, compatibility and setup requirements.


Option 2 · Sonoff
Sonoff SNZB-02UL AirGuard E-Ink TH
Last updated October 2026
View full device profileWhat the catalog tells us
Understand the tradeoffs.
These counts describe the available data, not a quality score. More features do not automatically make a better device.
Consider your setup
Apple Home
- Shelly BLU H&T ZBNo
- Sonoff SNZB-02UL AirGuard E-Ink THSONOFF Hub required
Confirm which features appear in Apple Home and whether extra hardware or a subscription is needed for your intended use.
Inspect the specificationsConsider your setup
Matter
- Shelly BLU H&T ZBNo
- Sonoff SNZB-02UL AirGuard E-Ink THSONOFF Hub required
Confirm the exact device type and the features exposed in your chosen platform. Protocol support does not establish feature parity across apps.
Inspect the specificationsConsider your setup
Battery Life
- Shelly BLU H&T ZB3 years
- Sonoff SNZB-02UL AirGuard E-Ink TH8+ months
Compare the stated test conditions. Catalog battery figures alone do not predict runtime in your home.
Inspect the specificationsYour priorities, side by side
Focus on what changes.
Mark the specifications you care about. Open manufacturer sources for verification scope; fields without citations remain catalog data. Expand notes for other qualifications.
Showing 35 of 35 rows. “Not recorded” does not mean “No”.
Alerts
- Shelly BLU H&T ZB
- No
- Sonoff SNZB-02UL AirGuard E-Ink TH
- No
- Shelly BLU H&T ZB
- Yes
Catalog note
Shelly documents alerts and notifications when humidity crosses predefined thresholds, used for cases such as stopping mold and mildew in basements and bathrooms.
- Sonoff SNZB-02UL AirGuard E-Ink TH
- Yes
- Shelly BLU H&T ZB
- Not recorded
- Sonoff SNZB-02UL AirGuard E-Ink TH
- Not recorded
- Shelly BLU H&T ZB
- Yes
Catalog note
Shelly documents alerts and notifications when temperature crosses predefined thresholds, used for cases such as preventing frozen pipes in cold weather.
- Sonoff SNZB-02UL AirGuard E-Ink TH
- Yes
Catalog note
A custom comfort range, one of six presets or edited by hand, pushes a phone notification when the reading leaves the band.
Connectivity
- Shelly BLU H&T ZB
- No
- Sonoff SNZB-02UL AirGuard E-Ink TH
- No
- Shelly BLU H&T ZB
- No
- Sonoff SNZB-02UL AirGuard E-Ink TH
- No
- Shelly BLU H&T ZB
- Yes
Manufacturer source
Bluetooth 5 LE is specified.
Shelly BLU H&T ZB manufacturer product page →- Source section
- Technical details: specifications
- Model
- Shelly BLU H&T ZB
- Region
- US manufacturer storefront; check the exact regional hardware variant
- Firmware
- Not specified by this source
- Checked
Battery life is a manufacturer estimate and depends on use.
Document check only; not a hands-on test or verification of every regional or firmware variant.
Catalog note
Bluetooth 5 (LE) on 2402 to 2480 MHz with under 8 dBm of RF power, the radio a Shelly Bluetooth gateway reads the sensor through.
- Sonoff SNZB-02UL AirGuard E-Ink TH
- No
- Shelly BLU H&T ZB
- No
- Sonoff SNZB-02UL AirGuard E-Ink TH
- No
- Shelly BLU H&T ZB
- No
- Sonoff SNZB-02UL AirGuard E-Ink TH
- No
- Shelly BLU H&T ZB
- No
- Sonoff SNZB-02UL AirGuard E-Ink TH
- No
- Shelly BLU H&T ZB
- Zigbee Hub required
Catalog note
Zigbee end device on 802.15.4, 2405 to 2480 MHz, so it joins an existing Zigbee coordinator rather than hosting a network. Five quick presses of the button start Zigbee pairing.
- Sonoff SNZB-02UL AirGuard E-Ink TH
- Zigbee Hub required
Catalog note
Zigbee 3.0 (IEEE 802.15.4) end device. SONOFF lists the ZBBridge-P, ZBBridge-U, Bridge-M, NSPanel Pro and iHost as its own gateways, plus the Aeotec SmartThings Hub V3 and the Zigbee Echo models. Time, date and weather on the screen need a gateway or Home Assistant.
Display
- Shelly BLU H&T ZB
- Not applicable / unspecified
- Sonoff SNZB-02UL AirGuard E-Ink TH
- No
- Shelly BLU H&T ZB
- Not applicable / unspecified
- Sonoff SNZB-02UL AirGuard E-Ink TH
- Yes
Catalog note
The screen displays the date once the device is connected to a gateway or Home Assistant.
- Shelly BLU H&T ZB
- No
Catalog note
This is the display-less model: its only output is a single red LED, and readings are delivered over Bluetooth or Zigbee. The sibling Shelly BLU H&T Display ZB (SBHT-103C) is the e-paper version.
- Sonoff SNZB-02UL AirGuard E-Ink TH
- Yes
Catalog note
2.9 inch flexible dot-matrix E-Ink panel with a nearly 180 degree viewing angle, readable in bright light. Without a gateway it shows temperature and humidity plus the past 6 hours on a button press.
- Shelly BLU H&T ZB
- Not applicable / unspecified
- Sonoff SNZB-02UL AirGuard E-Ink TH
- Not recorded
- Shelly BLU H&T ZB
- Not applicable / unspecified
- Sonoff SNZB-02UL AirGuard E-Ink TH
- 2.9"
Manufacturer source
The screen measures 2.9 inches.
Sonoff SNZB-02UL AirGuard E-Ink TH manufacturer product page →- Source section
- Product description
- Model
- Sonoff SNZB-02UL AirGuard E-Ink TH
- Region
- Manufacturer product page; no universal regional compatibility implied
- Firmware
- Not specified by this source
- Checked
Document check only; not a hands-on test or verification of every regional or firmware variant.
- Shelly BLU H&T ZB
- Not applicable / unspecified
- Sonoff SNZB-02UL AirGuard E-Ink TH
- E-Ink
Manufacturer source
The screen uses E-Ink.
Sonoff SNZB-02UL AirGuard E-Ink TH manufacturer product page →- Source section
- Product description
- Model
- Sonoff SNZB-02UL AirGuard E-Ink TH
- Region
- Manufacturer product page; no universal regional compatibility implied
- Firmware
- Not specified by this source
- Checked
Document check only; not a hands-on test or verification of every regional or firmware variant.
- Shelly BLU H&T ZB
- Not applicable / unspecified
- Sonoff SNZB-02UL AirGuard E-Ink TH
- Yes
Catalog note
The screen displays the current time once the device is connected to a gateway or Home Assistant.
- Shelly BLU H&T ZB
- Not applicable / unspecified
- Sonoff SNZB-02UL AirGuard E-Ink TH
- No
Catalog note
A single button on the back handles the 6-hour history recall, the temperature unit switch and pairing.
- Shelly BLU H&T ZB
- Not applicable / unspecified
- Sonoff SNZB-02UL AirGuard E-Ink TH
- Yes
Catalog note
Once paired to a SONOFF Zigbee gateway or Home Assistant, the screen shows a weather icon and weather information alongside the reading.
Features
- Shelly BLU H&T ZB
- Yes
Catalog note
Scene activation: the readings trigger scenes with other Shelly devices, the documented example being a Shelly Plus 1 wired to a bathroom fan that runs when humidity climbs.
- Sonoff SNZB-02UL AirGuard E-Ink TH
- Yes
Catalog note
Smart scenes trigger above or below a temperature or humidity threshold, or when the device goes offline, with a false alarm delay. The sensor is a trigger only, never an action.
- Shelly BLU H&T ZB
- Not recorded
- Sonoff SNZB-02UL AirGuard E-Ink TH
- Yes
Catalog note
Six hours of temperature and humidity history on the screen without a gateway, and up to six months of temperature, humidity, dew point and VPD curves in the app or Home Assistant, with CSV export.
Integrations
- Shelly BLU H&T ZB
- Shelly gateway required
Catalog note
Reached through the Shelly Smart Control account, which the product page lists alongside Google Home, Home Assistant and Samsung SmartThings, and which needs a gateway on the network for this sensor: the Shelly BLU Gateway, or any Shelly Plus, Pro, Gen3 or Gen4 device other than a sensor.
- Sonoff SNZB-02UL AirGuard E-Ink TH
- Yes
Catalog note
SONOFF lists Alexa temperature and humidity queries, and an Echo with a built-in Zigbee hub (Echo Plus 2nd, Echo 4th, Echo Show 2nd) as a compatible gateway.
- Shelly BLU H&T ZB
- No
Catalog note
The device documentation lists only Bluetooth 5 LE and Zigbee 802.15.4 with no Matter or HomeKit profile, and the platforms Shelly names for it are Alexa, Google Home, Home Assistant and Samsung SmartThings.
- Sonoff SNZB-02UL AirGuard E-Ink TH
- SONOFF Hub required
Catalog note
The device is Zigbee, not HomeKit. SONOFF republishes it into the Apple Home app through its own Matter bridges (Bridge-M, ZBBridge-U, iHost, eWeLink CUBE).
- Shelly BLU H&T ZB
- Shelly gateway required
Catalog note
Reached through the Shelly Smart Control account, which the product page lists alongside Alexa, Home Assistant and Samsung SmartThings, and which needs a gateway on the network for this sensor: the Shelly BLU Gateway, or any Shelly Plus, Pro, Gen3 or Gen4 device other than a sensor.
- Sonoff SNZB-02UL AirGuard E-Ink TH
- Yes
Catalog note
SONOFF lists a Google Home temperature and humidity voice query, reached through the eWeLink cloud-to-cloud link.
- Shelly BLU H&T ZB
- Yes
Catalog note
Zigbee2MQTT supports this exact model (SBHT-203C), exposing battery, temperature, humidity and identify, so it appears in Home Assistant as soon as it joins the Zigbee network.
- Sonoff SNZB-02UL AirGuard E-Ink TH
- Yes
Catalog note
Zigbee2MQTT works out of the box, while ZHA needs the script SONOFF publishes in its help center for the advanced functions such as the remote sensor display and the weather data.
- Shelly BLU H&T ZB
- No
Catalog note
The device documentation lists only Bluetooth 5 (LE) and Zigbee 802.15.4 as its radios, with no Matter profile. The FAQ on the product page presents Matter as a Gen3 and Gen4 feature, and this is a BLU battery sensor.
- Sonoff SNZB-02UL AirGuard E-Ink TH
- SONOFF Hub required
Catalog note
Not a Matter device itself: SONOFF bridges it into Matter through the Bridge-M, ZBBridge-U, iHost or eWeLink CUBE.
- Shelly BLU H&T ZB
- Shelly gateway required
Catalog note
Reached through the Shelly Smart Control account, which the product page lists alongside Alexa, Google Home and Home Assistant, and which needs a gateway on the network for this sensor: the Shelly BLU Gateway, or any Shelly Plus, Pro, Gen3 or Gen4 device other than a sensor.
- Sonoff SNZB-02UL AirGuard E-Ink TH
- Yes
Catalog note
SONOFF lists the Aeotec SmartThings Hub V3 as a compatible Zigbee gateway, with a SmartThings temperature and humidity query.
Power
- Shelly BLU H&T ZB
- 3 years
Manufacturer source
The stated battery life is up to three years.
Shelly BLU H&T ZB manufacturer product page →- Source section
- Technical details: specifications
- Model
- Shelly BLU H&T ZB
- Region
- US manufacturer storefront; check the exact regional hardware variant
- Firmware
- Not specified by this source
- Checked
Battery life is a manufacturer estimate and depends on use.
Document check only; not a hands-on test or verification of every regional or firmware variant.
- Sonoff SNZB-02UL AirGuard E-Ink TH
- 8+ months
- Shelly BLU H&T ZB
- 1x CR2032
Manufacturer source
Power comes from one CR2032 battery.
Shelly BLU H&T ZB manufacturer product page →- Source section
- Technical details: specifications
- Model
- Shelly BLU H&T ZB
- Region
- US manufacturer storefront; check the exact regional hardware variant
- Firmware
- Not specified by this source
- Checked
Battery life is a manufacturer estimate and depends on use.
Document check only; not a hands-on test or verification of every regional or firmware variant.
- Sonoff SNZB-02UL AirGuard E-Ink TH
- 2x AAA
Sensors
- Shelly BLU H&T ZB
- No
- Sonoff SNZB-02UL AirGuard E-Ink TH
- No
- Shelly BLU H&T ZB
- No
- Sonoff SNZB-02UL AirGuard E-Ink TH
- No
- Shelly BLU H&T ZB
- Yes
Manufacturer source
A relative humidity sensor is included.
Shelly BLU H&T ZB manufacturer product page →- Source section
- Technical details: specifications
- Model
- Shelly BLU H&T ZB
- Region
- US manufacturer storefront; check the exact regional hardware variant
- Firmware
- Not specified by this source
- Checked
Battery life is a manufacturer estimate and depends on use.
Document check only; not a hands-on test or verification of every regional or firmware variant.
Catalog note
Measures relative humidity across the full 0 to 100% RH range.
- Sonoff SNZB-02UL AirGuard E-Ink TH
- Yes
Manufacturer source
The sensor measures relative humidity.
Sonoff SNZB-02UL AirGuard E-Ink TH manufacturer product page →- Source section
- Product description
- Model
- Sonoff SNZB-02UL AirGuard E-Ink TH
- Region
- Manufacturer product page; no universal regional compatibility implied
- Firmware
- Not specified by this source
- Checked
Document check only; not a hands-on test or verification of every regional or firmware variant.
Catalog note
Accuracy of plus or minus 2% RH, refreshed every 5 seconds, with dew point and VPD calculated from the temperature and humidity readings.
- Shelly BLU H&T ZB
- No
Catalog note
The specification lists a humidity sensor and a temperature sensor only. Unlike the Display ZB version, there is not even a light sensor on board.
- Sonoff SNZB-02UL AirGuard E-Ink TH
- No
- Shelly BLU H&T ZB
- Yes
Manufacturer source
An air temperature sensor is included.
Shelly BLU H&T ZB manufacturer product page →- Source section
- Technical details: specifications
- Model
- Shelly BLU H&T ZB
- Region
- US manufacturer storefront; check the exact regional hardware variant
- Firmware
- Not specified by this source
- Checked
Battery life is a manufacturer estimate and depends on use.
Document check only; not a hands-on test or verification of every regional or firmware variant.
Catalog note
Measures ambient air temperature continuously and reports it over BLE advertising and Zigbee, with a rated ambient range of -20 to 60 degrees Celsius.
- Sonoff SNZB-02UL AirGuard E-Ink TH
- Yes
Manufacturer source
The sensor measures air temperature.
Sonoff SNZB-02UL AirGuard E-Ink TH manufacturer product page →- Source section
- Product description
- Model
- Sonoff SNZB-02UL AirGuard E-Ink TH
- Region
- Manufacturer product page; no universal regional compatibility implied
- Firmware
- Not specified by this source
- Checked
Document check only; not a hands-on test or verification of every regional or firmware variant.
Catalog note
Swiss Sensirion sensor, accuracy of plus or minus 0.2 C (plus or minus 0.4 F), refreshed every 5 seconds. Screen and app resolve to 0.1 C.
| Specification | Shelly BLU H&T ZB | Sonoff SNZB-02UL AirGuard E-Ink TH |
|---|---|---|
| Alerts | ||
| No | No | |
YesCatalog noteShelly documents alerts and notifications when humidity crosses predefined thresholds, used for cases such as stopping mold and mildew in basements and bathrooms. | Yes | |
| Not recorded | Not recorded | |
YesCatalog noteShelly documents alerts and notifications when temperature crosses predefined thresholds, used for cases such as preventing frozen pipes in cold weather. | YesCatalog noteA custom comfort range, one of six presets or edited by hand, pushes a phone notification when the reading leaves the band. | |
| Connectivity | ||
| No | No | |
| No | No | |
YesManufacturer sourceBluetooth 5 LE is specified. Shelly BLU H&T ZB manufacturer product page →
Battery life is a manufacturer estimate and depends on use. Document check only; not a hands-on test or verification of every regional or firmware variant. Catalog noteBluetooth 5 (LE) on 2402 to 2480 MHz with under 8 dBm of RF power, the radio a Shelly Bluetooth gateway reads the sensor through. | No | |
| No | No | |
| No | No | |
| No | No | |
Zigbee Hub requiredCatalog noteZigbee end device on 802.15.4, 2405 to 2480 MHz, so it joins an existing Zigbee coordinator rather than hosting a network. Five quick presses of the button start Zigbee pairing. | Zigbee Hub requiredCatalog noteZigbee 3.0 (IEEE 802.15.4) end device. SONOFF lists the ZBBridge-P, ZBBridge-U, Bridge-M, NSPanel Pro and iHost as its own gateways, plus the Aeotec SmartThings Hub V3 and the Zigbee Echo models. Time, date and weather on the screen need a gateway or Home Assistant. | |
| Display | ||
| Not applicable / unspecified | No | |
| Not applicable / unspecified | YesCatalog noteThe screen displays the date once the device is connected to a gateway or Home Assistant. | |
NoCatalog noteThis is the display-less model: its only output is a single red LED, and readings are delivered over Bluetooth or Zigbee. The sibling Shelly BLU H&T Display ZB (SBHT-103C) is the e-paper version. | YesCatalog note2.9 inch flexible dot-matrix E-Ink panel with a nearly 180 degree viewing angle, readable in bright light. Without a gateway it shows temperature and humidity plus the past 6 hours on a button press. | |
| Not applicable / unspecified | Not recorded | |
| Not applicable / unspecified | 2.9"Manufacturer sourceThe screen measures 2.9 inches. Sonoff SNZB-02UL AirGuard E-Ink TH manufacturer product page →
Document check only; not a hands-on test or verification of every regional or firmware variant. | |
| Not applicable / unspecified | E-InkManufacturer sourceThe screen uses E-Ink. Sonoff SNZB-02UL AirGuard E-Ink TH manufacturer product page →
Document check only; not a hands-on test or verification of every regional or firmware variant. | |
| Not applicable / unspecified | YesCatalog noteThe screen displays the current time once the device is connected to a gateway or Home Assistant. | |
| Not applicable / unspecified | NoCatalog noteA single button on the back handles the 6-hour history recall, the temperature unit switch and pairing. | |
| Not applicable / unspecified | YesCatalog noteOnce paired to a SONOFF Zigbee gateway or Home Assistant, the screen shows a weather icon and weather information alongside the reading. | |
| Features | ||
YesCatalog noteScene activation: the readings trigger scenes with other Shelly devices, the documented example being a Shelly Plus 1 wired to a bathroom fan that runs when humidity climbs. | YesCatalog noteSmart scenes trigger above or below a temperature or humidity threshold, or when the device goes offline, with a false alarm delay. The sensor is a trigger only, never an action. | |
| Not recorded | YesCatalog noteSix hours of temperature and humidity history on the screen without a gateway, and up to six months of temperature, humidity, dew point and VPD curves in the app or Home Assistant, with CSV export. | |
| Integrations | ||
Shelly gateway requiredCatalog noteReached through the Shelly Smart Control account, which the product page lists alongside Google Home, Home Assistant and Samsung SmartThings, and which needs a gateway on the network for this sensor: the Shelly BLU Gateway, or any Shelly Plus, Pro, Gen3 or Gen4 device other than a sensor. | YesCatalog noteSONOFF lists Alexa temperature and humidity queries, and an Echo with a built-in Zigbee hub (Echo Plus 2nd, Echo 4th, Echo Show 2nd) as a compatible gateway. | |
NoCatalog noteThe device documentation lists only Bluetooth 5 LE and Zigbee 802.15.4 with no Matter or HomeKit profile, and the platforms Shelly names for it are Alexa, Google Home, Home Assistant and Samsung SmartThings. | SONOFF Hub requiredCatalog noteThe device is Zigbee, not HomeKit. SONOFF republishes it into the Apple Home app through its own Matter bridges (Bridge-M, ZBBridge-U, iHost, eWeLink CUBE). | |
Shelly gateway requiredCatalog noteReached through the Shelly Smart Control account, which the product page lists alongside Alexa, Home Assistant and Samsung SmartThings, and which needs a gateway on the network for this sensor: the Shelly BLU Gateway, or any Shelly Plus, Pro, Gen3 or Gen4 device other than a sensor. | YesCatalog noteSONOFF lists a Google Home temperature and humidity voice query, reached through the eWeLink cloud-to-cloud link. | |
YesCatalog noteZigbee2MQTT supports this exact model (SBHT-203C), exposing battery, temperature, humidity and identify, so it appears in Home Assistant as soon as it joins the Zigbee network. | YesCatalog noteZigbee2MQTT works out of the box, while ZHA needs the script SONOFF publishes in its help center for the advanced functions such as the remote sensor display and the weather data. | |
NoCatalog noteThe device documentation lists only Bluetooth 5 (LE) and Zigbee 802.15.4 as its radios, with no Matter profile. The FAQ on the product page presents Matter as a Gen3 and Gen4 feature, and this is a BLU battery sensor. | SONOFF Hub requiredCatalog noteNot a Matter device itself: SONOFF bridges it into Matter through the Bridge-M, ZBBridge-U, iHost or eWeLink CUBE. | |
Shelly gateway requiredCatalog noteReached through the Shelly Smart Control account, which the product page lists alongside Alexa, Google Home and Home Assistant, and which needs a gateway on the network for this sensor: the Shelly BLU Gateway, or any Shelly Plus, Pro, Gen3 or Gen4 device other than a sensor. | YesCatalog noteSONOFF lists the Aeotec SmartThings Hub V3 as a compatible Zigbee gateway, with a SmartThings temperature and humidity query. | |
| Power | ||
3 yearsManufacturer sourceThe stated battery life is up to three years. Shelly BLU H&T ZB manufacturer product page →
Battery life is a manufacturer estimate and depends on use. Document check only; not a hands-on test or verification of every regional or firmware variant. | 8+ months | |
1x CR2032Manufacturer sourcePower comes from one CR2032 battery. Shelly BLU H&T ZB manufacturer product page →
Battery life is a manufacturer estimate and depends on use. Document check only; not a hands-on test or verification of every regional or firmware variant. | 2x AAA | |
| Sensors | ||
| No | No | |
| No | No | |
YesManufacturer sourceA relative humidity sensor is included. Shelly BLU H&T ZB manufacturer product page →
Battery life is a manufacturer estimate and depends on use. Document check only; not a hands-on test or verification of every regional or firmware variant. Catalog noteMeasures relative humidity across the full 0 to 100% RH range. | YesManufacturer sourceThe sensor measures relative humidity. Sonoff SNZB-02UL AirGuard E-Ink TH manufacturer product page →
Document check only; not a hands-on test or verification of every regional or firmware variant. Catalog noteAccuracy of plus or minus 2% RH, refreshed every 5 seconds, with dew point and VPD calculated from the temperature and humidity readings. | |
NoCatalog noteThe specification lists a humidity sensor and a temperature sensor only. Unlike the Display ZB version, there is not even a light sensor on board. | No | |
YesManufacturer sourceAn air temperature sensor is included. Shelly BLU H&T ZB manufacturer product page →
Battery life is a manufacturer estimate and depends on use. Document check only; not a hands-on test or verification of every regional or firmware variant. Catalog noteMeasures ambient air temperature continuously and reports it over BLE advertising and Zigbee, with a rated ambient range of -20 to 60 degrees Celsius. | YesManufacturer sourceThe sensor measures air temperature. Sonoff SNZB-02UL AirGuard E-Ink TH manufacturer product page →
Document check only; not a hands-on test or verification of every regional or firmware variant. Catalog noteSwiss Sensirion sensor, accuracy of plus or minus 0.2 C (plus or minus 0.4 F), refreshed every 5 seconds. Screen and app resolve to 0.1 C. | |
Know what’s behind the comparison.
The table matches specifications by section and field. It preserves notes, separates missing data from explicit “No” values, and keeps qualifications attached to their values. No overall winner is assigned from feature counts.
Read our comparison methodology