
Option 1 · Sonoff
Sonoff SNZB-02P Temperature & Humidity Sensor
Last updated October 2026
View full device profileThe Smart Device Compare comparison
Understand the differences. Decide what matters to your home.
Build another comparison →Before you compare every specification
A summary of selected recorded differences between these temperature & humidity sensors. Check the full specification table below for details and conditions.
These observations are derived from recorded catalog data and have not all been independently verified. Confirm details with the manufacturer before purchasing.
Compare capabilities, compatibility and setup requirements.

Option 1 · Sonoff
Last updated October 2026
View full device profile
Option 2 · Sonoff
Last updated October 2026
View full device profileWhat the catalog tells us
These counts describe the available data, not a quality score. More features do not automatically make a better device.
Consider your setup
Compare the stated test conditions. Catalog battery figures alone do not predict runtime in your home.
Inspect the specificationsYour priorities, side by side
Mark the specifications you care about. Open manufacturer sources for verification scope; fields without citations remain catalog data. Expand notes for other qualifications.
Showing 35 of 35 rows. “Not recorded” does not mean “No”.
A custom comfort range, one of six presets or edited by hand, pushes a phone notification when the reading leaves the band.
Zigbee 3.0 (IEEE 802.15.4) end device. SONOFF lists the ZBBridge-P, ZBBridge-U, Bridge-M, NSPanel Pro and iHost as its own gateways, plus the Aeotec SmartThings Hub V3 and the Zigbee Echo models. Time, date and weather on the screen need a gateway or Home Assistant.
The screen displays the date once the device is connected to a gateway or Home Assistant.
2.9 inch flexible dot-matrix E-Ink panel with a nearly 180 degree viewing angle, readable in bright light. Without a gateway it shows temperature and humidity plus the past 6 hours on a button press.
The screen measures 2.9 inches.
Sonoff SNZB-02UL AirGuard E-Ink TH manufacturer product page →Document check only; not a hands-on test or verification of every regional or firmware variant.
The screen uses E-Ink.
Sonoff SNZB-02UL AirGuard E-Ink TH manufacturer product page →Document check only; not a hands-on test or verification of every regional or firmware variant.
The screen displays the current time once the device is connected to a gateway or Home Assistant.
A single button on the back handles the 6-hour history recall, the temperature unit switch and pairing.
Once paired to a SONOFF Zigbee gateway or Home Assistant, the screen shows a weather icon and weather information alongside the reading.
Smart scenes trigger above or below a temperature or humidity threshold, or when the device goes offline, with a false alarm delay. The sensor is a trigger only, never an action.
Six hours of temperature and humidity history on the screen without a gateway, and up to six months of temperature, humidity, dew point and VPD curves in the app or Home Assistant, with CSV export.
SONOFF lists Alexa temperature and humidity queries, and an Echo with a built-in Zigbee hub (Echo Plus 2nd, Echo 4th, Echo Show 2nd) as a compatible gateway.
SONOFF lists this model among the Zigbee devices its Matter bridges (Zigbee Bridge Ultra, iHost, NSPanel Pro) publish to Matter, which is how it reaches the Apple Home app. Apple Home has no Zigbee radio of its own.
The device is Zigbee, not HomeKit. SONOFF republishes it into the Apple Home app through its own Matter bridges (Bridge-M, ZBBridge-U, iHost, eWeLink CUBE).
SONOFF lists a Google Home temperature and humidity voice query, reached through the eWeLink cloud-to-cloud link.
Zigbee2MQTT works out of the box, while ZHA needs the script SONOFF publishes in its help center for the advanced functions such as the remote sensor display and the weather data.
The device is not Matter itself: SONOFF lists it among the Zigbee models its Matter bridges (Zigbee Bridge Ultra, iHost, NSPanel Pro) republish into Matter.
Not a Matter device itself: SONOFF bridges it into Matter through the Bridge-M, ZBBridge-U, iHost or eWeLink CUBE.
Pairs with a SmartThings hub as a standard Zigbee device using the SONOFF driver
SONOFF lists the Aeotec SmartThings Hub V3 as a compatible Zigbee gateway, with a SmartThings temperature and humidity query.
The manufacturer estimates up to four years of battery life.
Sonoff SNZB-02P Temperature & Humidity Sensor manufacturer product page →The estimate is based on manufacturer lab data; actual battery life varies.
Document check only; not a hands-on test or verification of every regional or firmware variant.
A CR2477 battery powers the sensor.
Sonoff SNZB-02P Temperature & Humidity Sensor manufacturer product page →The estimate is based on manufacturer lab data; actual battery life varies.
Document check only; not a hands-on test or verification of every regional or firmware variant.
The sensor measures relative humidity.
Sonoff SNZB-02P Temperature & Humidity Sensor manufacturer product page →Document check only; not a hands-on test or verification of every regional or firmware variant.
The sensor measures relative humidity.
Sonoff SNZB-02UL AirGuard E-Ink TH manufacturer product page →Document check only; not a hands-on test or verification of every regional or firmware variant.
Accuracy of plus or minus 2% RH, refreshed every 5 seconds, with dew point and VPD calculated from the temperature and humidity readings.
The sensor measures air temperature.
Sonoff SNZB-02P Temperature & Humidity Sensor manufacturer product page →Document check only; not a hands-on test or verification of every regional or firmware variant.
The sensor measures air temperature.
Sonoff SNZB-02UL AirGuard E-Ink TH manufacturer product page →Document check only; not a hands-on test or verification of every regional or firmware variant.
Swiss Sensirion sensor, accuracy of plus or minus 0.2 C (plus or minus 0.4 F), refreshed every 5 seconds. Screen and app resolve to 0.1 C.
| Specification | Sonoff SNZB-02P Temperature & Humidity Sensor | Sonoff SNZB-02UL AirGuard E-Ink TH |
|---|---|---|
| Alerts | ||
| No | No | |
| Yes | Yes | |
| Yes | Not recorded | |
| Yes | YesCatalog noteA custom comfort range, one of six presets or edited by hand, pushes a phone notification when the reading leaves the band. | |
| Connectivity | ||
| No | No | |
| No | No | |
| No | No | |
| No | No | |
| No | No | |
| No | No | |
| Zigbee Hub required | Zigbee Hub requiredCatalog noteZigbee 3.0 (IEEE 802.15.4) end device. SONOFF lists the ZBBridge-P, ZBBridge-U, Bridge-M, NSPanel Pro and iHost as its own gateways, plus the Aeotec SmartThings Hub V3 and the Zigbee Echo models. Time, date and weather on the screen need a gateway or Home Assistant. | |
| Display | ||
| Not applicable / unspecified | No | |
| Not applicable / unspecified | YesCatalog noteThe screen displays the date once the device is connected to a gateway or Home Assistant. | |
| No | YesCatalog note2.9 inch flexible dot-matrix E-Ink panel with a nearly 180 degree viewing angle, readable in bright light. Without a gateway it shows temperature and humidity plus the past 6 hours on a button press. | |
| Not applicable / unspecified | Not recorded | |
| Not applicable / unspecified | 2.9"Manufacturer sourceThe screen measures 2.9 inches. Sonoff SNZB-02UL AirGuard E-Ink TH manufacturer product page →
Document check only; not a hands-on test or verification of every regional or firmware variant. | |
| Not applicable / unspecified | E-InkManufacturer sourceThe screen uses E-Ink. Sonoff SNZB-02UL AirGuard E-Ink TH manufacturer product page →
Document check only; not a hands-on test or verification of every regional or firmware variant. | |
| Not applicable / unspecified | YesCatalog noteThe screen displays the current time once the device is connected to a gateway or Home Assistant. | |
| Not applicable / unspecified | NoCatalog noteA single button on the back handles the 6-hour history recall, the temperature unit switch and pairing. | |
| Not applicable / unspecified | YesCatalog noteOnce paired to a SONOFF Zigbee gateway or Home Assistant, the screen shows a weather icon and weather information alongside the reading. | |
| Features | ||
| Yes | YesCatalog noteSmart scenes trigger above or below a temperature or humidity threshold, or when the device goes offline, with a false alarm delay. The sensor is a trigger only, never an action. | |
| Yes | YesCatalog noteSix hours of temperature and humidity history on the screen without a gateway, and up to six months of temperature, humidity, dew point and VPD curves in the app or Home Assistant, with CSV export. | |
| Integrations | ||
| Yes | YesCatalog noteSONOFF lists Alexa temperature and humidity queries, and an Echo with a built-in Zigbee hub (Echo Plus 2nd, Echo 4th, Echo Show 2nd) as a compatible gateway. | |
SONOFF Hub requiredCatalog noteSONOFF lists this model among the Zigbee devices its Matter bridges (Zigbee Bridge Ultra, iHost, NSPanel Pro) publish to Matter, which is how it reaches the Apple Home app. Apple Home has no Zigbee radio of its own. | SONOFF Hub requiredCatalog noteThe device is Zigbee, not HomeKit. SONOFF republishes it into the Apple Home app through its own Matter bridges (Bridge-M, ZBBridge-U, iHost, eWeLink CUBE). | |
| Yes | YesCatalog noteSONOFF lists a Google Home temperature and humidity voice query, reached through the eWeLink cloud-to-cloud link. | |
| Yes | YesCatalog noteZigbee2MQTT works out of the box, while ZHA needs the script SONOFF publishes in its help center for the advanced functions such as the remote sensor display and the weather data. | |
SONOFF Hub requiredCatalog noteThe device is not Matter itself: SONOFF lists it among the Zigbee models its Matter bridges (Zigbee Bridge Ultra, iHost, NSPanel Pro) republish into Matter. | SONOFF Hub requiredCatalog noteNot a Matter device itself: SONOFF bridges it into Matter through the Bridge-M, ZBBridge-U, iHost or eWeLink CUBE. | |
YesCatalog notePairs with a SmartThings hub as a standard Zigbee device using the SONOFF driver | YesCatalog noteSONOFF lists the Aeotec SmartThings Hub V3 as a compatible Zigbee gateway, with a SmartThings temperature and humidity query. | |
| Power | ||
4 yearsManufacturer sourceThe manufacturer estimates up to four years of battery life. Sonoff SNZB-02P Temperature & Humidity Sensor manufacturer product page →
The estimate is based on manufacturer lab data; actual battery life varies. Document check only; not a hands-on test or verification of every regional or firmware variant. | 8+ months | |
CR2477Manufacturer sourceA CR2477 battery powers the sensor. Sonoff SNZB-02P Temperature & Humidity Sensor manufacturer product page →
The estimate is based on manufacturer lab data; actual battery life varies. Document check only; not a hands-on test or verification of every regional or firmware variant. | 2x AAA | |
| Sensors | ||
| No | No | |
| No | No | |
YesManufacturer sourceThe sensor measures relative humidity. Sonoff SNZB-02P Temperature & Humidity Sensor manufacturer product page →
Document check only; not a hands-on test or verification of every regional or firmware variant. | YesManufacturer sourceThe sensor measures relative humidity. Sonoff SNZB-02UL AirGuard E-Ink TH manufacturer product page →
Document check only; not a hands-on test or verification of every regional or firmware variant. Catalog noteAccuracy of plus or minus 2% RH, refreshed every 5 seconds, with dew point and VPD calculated from the temperature and humidity readings. | |
| No | No | |
YesManufacturer sourceThe sensor measures air temperature. Sonoff SNZB-02P Temperature & Humidity Sensor manufacturer product page →
Document check only; not a hands-on test or verification of every regional or firmware variant. | YesManufacturer sourceThe sensor measures air temperature. Sonoff SNZB-02UL AirGuard E-Ink TH manufacturer product page →
Document check only; not a hands-on test or verification of every regional or firmware variant. Catalog noteSwiss Sensirion sensor, accuracy of plus or minus 0.2 C (plus or minus 0.4 F), refreshed every 5 seconds. Screen and app resolve to 0.1 C. | |
The table matches specifications by section and field. It preserves notes, separates missing data from explicit “No” values, and keeps qualifications attached to their values. No overall winner is assigned from feature counts.
Read our comparison methodology