The Smart Device Compare comparison
Aeotec WallMote Quad vs Lutron Caseta Diva Smart Dimmer Switch
Understand the differences. Decide what matters to your home.
Build another comparison →Before you compare every specification
Key differences between Aeotec WallMote Quad and Lutron Caseta Diva Smart Dimmer Switch
A summary of selected recorded differences between these wall switches. Check the full specification table below for details and conditions.
Feature differences among your selected devices
- Wireless Switch Mode (features): Aeotec WallMote Quad — Yes (4 buttons, up to 16 scenes; rechargeable lithium battery); Lutron Caseta Diva Smart Dimmer Switch — No (The dimmer is wired to the load it controls; the wire-free half of the system is the separate Pico remote or the Claro accessory switch).
- Capacitive Load (power): Aeotec WallMote Quad — No; Lutron Caseta Diva Smart Dimmer Switch — Yes (Dimmable CFL up to 150 W, listed alongside LED in the derating chart of the Diva's own installation guide).
- Inductive Load (power): Aeotec WallMote Quad — No; Lutron Caseta Diva Smart Dimmer Switch — Yes (Dimmable LED rated for 120 V~, up to 150 W with Lutron's LED+ forward-phase dimming).
- Resistive Load (power): Aeotec WallMote Quad — No; Lutron Caseta Diva Smart Dimmer Switch — Yes (Incandescent and halogen loads, 25 W minimum and 600 W maximum when the dimmer is not ganged).
Specifications to check side by side
- Z Wave (connectivity): Aeotec WallMote Quad — Z-Wave Hub required (Z-Wave Plus); Lutron Caseta Diva Smart Dimmer Switch — No.
- Switches (features): Aeotec WallMote Quad — 4; Lutron Caseta Diva Smart Dimmer Switch — 1.
- Alexa (integrations): Aeotec WallMote Quad — No (Scene controllers are not Alexa endpoints: a hub keeps their button presses as internal triggers and only the loads they control show up in Alexa); Lutron Caseta Diva Smart Dimmer Switch — Lutron Hub required (Lutron lists Amazon Alexa among the platforms Caseta works with, through the Lutron Smart Hub).
- Apple Home (integrations): Aeotec WallMote Quad — No; Lutron Caseta Diva Smart Dimmer Switch — Lutron Hub required (Lutron lists Apple Home among the platforms Caseta works with; the Apple Home technology sits in the smart hub, so Siri controls the dimmer once it is paired to one).
Information still to confirm
- 14 of 34 comparison fields lack a resolved value for at least one selected device. Missing information is not evidence that a feature is absent.
- Check the full table and manufacturer documentation before ruling out a device.
These observations are derived from recorded catalog data and have not all been independently verified. Confirm details with the manufacturer before purchasing.
Compare capabilities, compatibility and setup requirements.
Option 2 · Lutron
Lutron Caseta Diva Smart Dimmer Switch
Last updated October 2026
View full device profileWhat the catalog tells us
Understand the tradeoffs.
These counts describe the available data, not a quality score. More features do not automatically make a better device.
10differences with recorded values for every device
14rows with missing or unspecified information
Consider your setup
Apple Home
- Aeotec WallMote QuadNo
- Lutron Caseta Diva Smart Dimmer SwitchLutron Hub required
Confirm which features appear in Apple Home and whether extra hardware or a subscription is needed for your intended use.
Inspect the specificationsConsider your setup
Home Assistant
- Aeotec WallMote QuadYes
- Lutron Caseta Diva Smart Dimmer SwitchLutron Hub required
Check the integration method, supported model and firmware. A catalog Yes does not establish local control or official support.
Inspect the specificationsYour priorities, side by side
Focus on what changes.
Mark the specifications you care about. Open manufacturer sources for verification scope; fields without citations remain catalog data. Expand notes for other qualifications.
Showing 34 of 34 rows. “Not recorded” does not mean “No”.
Connectivity
- Aeotec WallMote Quad
- No
- Lutron Caseta Diva Smart Dimmer Switch
- No
Catalog note
The dimmer reaches the Lutron Smart Hub, Pico remotes and Caseta motion sensors over Lutron's own Clear Connect RF rather than Wi-Fi, which is why the lights keep responding when the router is down
- Aeotec WallMote Quad
- No
- Lutron Caseta Diva Smart Dimmer Switch
- No
- Aeotec WallMote Quad
- No
- Lutron Caseta Diva Smart Dimmer Switch
- No
- Aeotec WallMote Quad
- No
- Lutron Caseta Diva Smart Dimmer Switch
- No
- Aeotec WallMote Quad
- Z-Wave Hub required
Catalog note
Z-Wave Plus
- Lutron Caseta Diva Smart Dimmer Switch
- No
- Aeotec WallMote Quad
- No
- Lutron Caseta Diva Smart Dimmer Switch
- No
Features
- Aeotec WallMote Quad
- Not recorded
- Lutron Caseta Diva Smart Dimmer Switch
- Yes
Catalog note
Lutron documents that the Diva's status LED can be switched on or off from the Lutron app (it is on by default), and the same screen adjusts the dimmer's high-end and low-end trim
- Aeotec WallMote Quad
- Yes
- Lutron Caseta Diva Smart Dimmer Switch
- Yes
Catalog note
Scenes, schedules, geofencing and Smart Away from the Lutron app, plus up to 10 Pico remotes or Caseta motion sensors paired directly to the dimmer with no hub at all
- Aeotec WallMote Quad
- No
- Lutron Caseta Diva Smart Dimmer Switch
- No
- Aeotec WallMote Quad
- Not recorded
- Lutron Caseta Diva Smart Dimmer Switch
- Yes
Catalog note
Power failure memory: should power be interrupted, the control returns to the level it was set to before the interruption
- Aeotec WallMote Quad
- Yes
- Lutron Caseta Diva Smart Dimmer Switch
- Yes
Catalog note
A white soft-glow light bar runs beside the slider and shows the light level, which is what makes the dimmer readable in a dark room
- Aeotec WallMote Quad
- 4
- Lutron Caseta Diva Smart Dimmer Switch
- 1
- Aeotec WallMote Quad
- Yes
Catalog note
4 buttons, up to 16 scenes; rechargeable lithium battery
- Lutron Caseta Diva Smart Dimmer Switch
- No
Catalog note
The dimmer is wired to the load it controls; the wire-free half of the system is the separate Pico remote or the Claro accessory switch
Integrations
- Aeotec WallMote Quad
- No
Catalog note
Scene controllers are not Alexa endpoints: a hub keeps their button presses as internal triggers and only the loads they control show up in Alexa
- Lutron Caseta Diva Smart Dimmer Switch
- Lutron Hub required
Catalog note
Lutron lists Amazon Alexa among the platforms Caseta works with, through the Lutron Smart Hub
- Aeotec WallMote Quad
- No
- Lutron Caseta Diva Smart Dimmer Switch
- Lutron Hub required
Catalog note
Lutron lists Apple Home among the platforms Caseta works with; the Apple Home technology sits in the smart hub, so Siri controls the dimmer once it is paired to one
- Aeotec WallMote Quad
- Not recorded
- Lutron Caseta Diva Smart Dimmer Switch
- Lutron Hub required
Catalog note
Lutron lists Google Assistant among the platforms Caseta works with, through the Lutron Smart Hub
- Aeotec WallMote Quad
- Yes
- Lutron Caseta Diva Smart Dimmer Switch
- Lutron Hub required
Catalog note
The core Lutron Caseta integration connects to the Lutron Caseta Smart Hub (L-BDG2-WH) and exposes wall dimmers as lights
- Aeotec WallMote Quad
- No
- Lutron Caseta Diva Smart Dimmer Switch
- No
Catalog note
The CSA certified-product database holds no Matter certification for Lutron (only three Zigbee 3.0 Aurora dimmers), and Lutron's own Caseta compatibility page never mentions Matter
- Aeotec WallMote Quad
- Yes
Catalog note
Works via certified Z-Wave gateways: SmartThings, Hubitat, Homey and more
- Lutron Caseta Diva Smart Dimmer Switch
- Lutron Hub required
Catalog note
Lutron lists Samsung SmartThings among the platforms Caseta works with, through the Lutron Smart Hub
Power
- Aeotec WallMote Quad
- Not applicable / unspecified
- Lutron Caseta Diva Smart Dimmer Switch
- 120V
Catalog note
Operating voltage 120 V~ 50/60 Hz, listed for the DVRF-6L in Lutron's Caseta load controls specification submittal
- Aeotec WallMote Quad
- No
- Lutron Caseta Diva Smart Dimmer Switch
- Yes
Catalog note
Dimmable CFL up to 150 W, listed alongside LED in the derating chart of the Diva's own installation guide
- Aeotec WallMote Quad
- Not applicable / unspecified
- Lutron Caseta Diva Smart Dimmer Switch
- Not recorded
- Aeotec WallMote Quad
- Not applicable / unspecified
- Lutron Caseta Diva Smart Dimmer Switch
- 150W
- Aeotec WallMote Quad
- No
- Lutron Caseta Diva Smart Dimmer Switch
- Yes
Catalog note
Dimmable LED rated for 120 V~, up to 150 W with Lutron's LED+ forward-phase dimming
- Aeotec WallMote Quad
- Not applicable / unspecified
- Lutron Caseta Diva Smart Dimmer Switch
- Not recorded
- Aeotec WallMote Quad
- Not applicable / unspecified
- Lutron Caseta Diva Smart Dimmer Switch
- 150W
- Aeotec WallMote Quad
- No
- Lutron Caseta Diva Smart Dimmer Switch
- No
Catalog note
Simple two-wire installation, so no neutral wire is needed in the wallbox
- Aeotec WallMote Quad
- No
- Lutron Caseta Diva Smart Dimmer Switch
- Yes
Catalog note
Incandescent and halogen loads, 25 W minimum and 600 W maximum when the dimmer is not ganged
- Aeotec WallMote Quad
- Not applicable / unspecified
- Lutron Caseta Diva Smart Dimmer Switch
- Not recorded
- Aeotec WallMote Quad
- Not applicable / unspecified
- Lutron Caseta Diva Smart Dimmer Switch
- 600W
Catalog note
600 W single gang, derated to 500 W in a double gang and 400 W in a triple gang wallbox
Safety Features
- Aeotec WallMote Quad
- Not recorded
- Lutron Caseta Diva Smart Dimmer Switch
- No
- Aeotec WallMote Quad
- Not recorded
- Lutron Caseta Diva Smart Dimmer Switch
- Yes
Catalog note
The dimmer has an Over Temperature Protection (OTP) mode: it drops the load and blinks the light bar four times when it runs too hot, typically after being overloaded or ganged without derating
- Aeotec WallMote Quad
- Not recorded
- Lutron Caseta Diva Smart Dimmer Switch
- No
Catalog note
An overload is caught by the thermal protection rather than by a separate power cutoff, so exceeding the wattage rating is prevented by the derating chart, not by the dimmer
- Aeotec WallMote Quad
- Not recorded
- Lutron Caseta Diva Smart Dimmer Switch
- No
Catalog note
Lutron documents surge withstand testing to IEEE C62.41-1991, which is immunity rather than a protective cutoff, and claims no overvoltage protection function
| Specification | Aeotec WallMote Quad | Lutron Caseta Diva Smart Dimmer Switch |
|---|---|---|
| Connectivity | ||
| No | NoCatalog noteThe dimmer reaches the Lutron Smart Hub, Pico remotes and Caseta motion sensors over Lutron's own Clear Connect RF rather than Wi-Fi, which is why the lights keep responding when the router is down | |
| No | No | |
| No | No | |
| No | No | |
Z-Wave Hub requiredCatalog noteZ-Wave Plus | No | |
| No | No | |
| Features | ||
| Not recorded | YesCatalog noteLutron documents that the Diva's status LED can be switched on or off from the Lutron app (it is on by default), and the same screen adjusts the dimmer's high-end and low-end trim | |
| Yes | YesCatalog noteScenes, schedules, geofencing and Smart Away from the Lutron app, plus up to 10 Pico remotes or Caseta motion sensors paired directly to the dimmer with no hub at all | |
| No | No | |
| Not recorded | YesCatalog notePower failure memory: should power be interrupted, the control returns to the level it was set to before the interruption | |
| Yes | YesCatalog noteA white soft-glow light bar runs beside the slider and shows the light level, which is what makes the dimmer readable in a dark room | |
| 4 | 1 | |
YesCatalog note4 buttons, up to 16 scenes; rechargeable lithium battery | NoCatalog noteThe dimmer is wired to the load it controls; the wire-free half of the system is the separate Pico remote or the Claro accessory switch | |
| Integrations | ||
NoCatalog noteScene controllers are not Alexa endpoints: a hub keeps their button presses as internal triggers and only the loads they control show up in Alexa | Lutron Hub requiredCatalog noteLutron lists Amazon Alexa among the platforms Caseta works with, through the Lutron Smart Hub | |
| No | Lutron Hub requiredCatalog noteLutron lists Apple Home among the platforms Caseta works with; the Apple Home technology sits in the smart hub, so Siri controls the dimmer once it is paired to one | |
| Not recorded | Lutron Hub requiredCatalog noteLutron lists Google Assistant among the platforms Caseta works with, through the Lutron Smart Hub | |
| Yes | Lutron Hub requiredCatalog noteThe core Lutron Caseta integration connects to the Lutron Caseta Smart Hub (L-BDG2-WH) and exposes wall dimmers as lights | |
| No | NoCatalog noteThe CSA certified-product database holds no Matter certification for Lutron (only three Zigbee 3.0 Aurora dimmers), and Lutron's own Caseta compatibility page never mentions Matter | |
YesCatalog noteWorks via certified Z-Wave gateways: SmartThings, Hubitat, Homey and more | Lutron Hub requiredCatalog noteLutron lists Samsung SmartThings among the platforms Caseta works with, through the Lutron Smart Hub | |
| Power | ||
| Not applicable / unspecified | 120VCatalog noteOperating voltage 120 V~ 50/60 Hz, listed for the DVRF-6L in Lutron's Caseta load controls specification submittal | |
| No | YesCatalog noteDimmable CFL up to 150 W, listed alongside LED in the derating chart of the Diva's own installation guide | |
| Not applicable / unspecified | Not recorded | |
| Not applicable / unspecified | 150W | |
| No | YesCatalog noteDimmable LED rated for 120 V~, up to 150 W with Lutron's LED+ forward-phase dimming | |
| Not applicable / unspecified | Not recorded | |
| Not applicable / unspecified | 150W | |
| No | NoCatalog noteSimple two-wire installation, so no neutral wire is needed in the wallbox | |
| No | YesCatalog noteIncandescent and halogen loads, 25 W minimum and 600 W maximum when the dimmer is not ganged | |
| Not applicable / unspecified | Not recorded | |
| Not applicable / unspecified | 600WCatalog note600 W single gang, derated to 500 W in a double gang and 400 W in a triple gang wallbox | |
| Safety Features | ||
| Not recorded | No | |
| Not recorded | YesCatalog noteThe dimmer has an Over Temperature Protection (OTP) mode: it drops the load and blinks the light bar four times when it runs too hot, typically after being overloaded or ganged without derating | |
| Not recorded | NoCatalog noteAn overload is caught by the thermal protection rather than by a separate power cutoff, so exceeding the wattage rating is prevented by the derating chart, not by the dimmer | |
| Not recorded | NoCatalog noteLutron documents surge withstand testing to IEEE C62.41-1991, which is immunity rather than a protective cutoff, and claims no overvoltage protection function | |
Know what’s behind the comparison.
The table matches specifications by section and field. It preserves notes, separates missing data from explicit “No” values, and keeps qualifications attached to their values. No overall winner is assigned from feature counts.
Read our comparison methodology