
Option 1 · Leviton
Leviton Decora Smart Wi-Fi Switch D315S
Last updated October 2026
View full device profileThe Smart Device Compare comparison
Understand the differences. Decide what matters to your home.
Build another comparison →Before you compare every specification
A summary of selected recorded differences between these wall switches. Check the full specification table below for details and conditions.
These observations are derived from recorded catalog data and have not all been independently verified. Confirm details with the manufacturer before purchasing.
Compare capabilities, compatibility and setup requirements.

Option 1 · Leviton
Last updated October 2026
View full device profile
What the catalog tells us
These counts describe the available data, not a quality score. More features do not automatically make a better device.
Consider your setup
Confirm which features appear in Apple Home and whether extra hardware or a subscription is needed for your intended use.
Inspect the specificationsConsider your setup
Confirm the exact device type and the features exposed in your chosen platform. Protocol support does not establish feature parity across apps.
Inspect the specificationsYour priorities, side by side
Mark the specifications you care about. Open manufacturer sources for verification scope; fields without citations remain catalog data. Expand notes for other qualifications.
Showing 34 of 34 rows. “Not recorded” does not mean “No”.
802.11 b/g/n on 2.4 GHz, with WPA, WPA2, WPA3 or open security
IEEE 802.11b/g/n, 2.4GHz 1T1R
Leviton's network specification is 2.4 GHz only
Bluetooth v5.0 on board, and the CSA Matter certificate lists Wi-Fi and Bluetooth as the transports of this model
This is the Wi-Fi model; Leviton's Z-Wave switches are a separate Decora Smart line
The LED can be set to light when the load is on, when the load is off (the default) or to stay off, from the My Leviton app or the switch's own setup mode
LED Status is a configurable entry in the Kasa app's Device Settings page
Schedules with sunrise and sunset triggers, room scenes, activities and an auto-shutoff timer in the My Leviton app, with schedules stored on the device so they keep running during an internet outage
Schedules with fade rate, countdown timer, Away Mode, brightness presets and Smart Actions in the Kasa app
Onboard memory keeps the configuration and the schedules, and the switch returns to its last state when power is restored
TP-Link states the default-on option exists in its smart bulbs but not in its plugs or smart switches
Status LED that illuminates when the lights are off so the switch is easy to find in the dark, and reports connectivity and device status
A brightness indicator plus two status LEDs that change colour according to the switch state
The switch is wired to the load it controls; the wire-free half of the system is the separate Decora Smart Anywhere Companion (DAWSC)
Leviton lists Amazon Alexa control for the D315S
Leviton lists Apple Home and Siri, and the switch is Matter certified, so Apple Home commissions it over Matter
TP-Link's own model comparison lists the HS220 as compatible with Alexa and Google Home only, while its HomeKit dimmer (KS220) is listed as HomeKit/Alexa/Google Home
Leviton lists Google Home and Hey Google voice control for the D315S
Leviton lists Home Assistant, which is a certified Matter controller; the core Leviton Decora Smart Wi-Fi integration also connects the My Leviton account
The official Home Assistant TP-Link integration lists HS220 among its supported Kasa wall switches
Matter ready out of the box, certified by the CSA under certificate CSA25943MAT47253-24; the setup code is on the device, on the packaging and in the My Leviton app, and the switch can be commissioned into several Matter controllers
TP-Link's Matter compatibility list covers the KS205, KS225, TS15 and TS25 switches, not the HS220
Leviton lists SmartThings, and Matter certification grants the Works with SmartThings path
The HS220 user guide points to Samsung SmartThings under Work with Kasa, and the retail box carries the Works with SmartThings badge
Load rating of 120VAC, 60Hz
Input voltage 100-120VAC 60Hz
Leviton's ratings chart lists LED/CFL loads up to 3A alongside the 15A general use and 1/3 HP motor ratings
Dimmable CFL up to 150 W
Rated for motor loads up to 1/3 HP, so it can switch ceiling fans, exhaust fans and pumps
Dimmable LED up to 150 W, using leading edge (TRIAC phase cut) dimming
A neutral wire in the wallbox is required; Leviton's no-neutral Wi-Fi switch is the separate DN15S, which needs the MLWSB bridge
A neutral wire in the wall box is required, and the switch works in single pole wiring only
Rated 15A general use at 120VAC, which covers incandescent and other general purpose loads
Rated for 300W incandescent lighting
TP-Link's own model comparison lists the HS220 rating as 2.5A/120V
Neither the D315S installation instructions nor Leviton's published specifications describe an over-temperature cutoff
| Specification | Leviton Decora Smart Wi-Fi Switch D315S | TP-Link Kasa HS220 |
|---|---|---|
| Connectivity | ||
YesCatalog note802.11 b/g/n on 2.4 GHz, with WPA, WPA2, WPA3 or open security | YesCatalog noteIEEE 802.11b/g/n, 2.4GHz 1T1R | |
NoCatalog noteLeviton's network specification is 2.4 GHz only | No | |
YesCatalog noteBluetooth v5.0 on board, and the CSA Matter certificate lists Wi-Fi and Bluetooth as the transports of this model | No | |
| No | No | |
NoCatalog noteThis is the Wi-Fi model; Leviton's Z-Wave switches are a separate Decora Smart line | No | |
| No | No | |
| Features | ||
YesCatalog noteThe LED can be set to light when the load is on, when the load is off (the default) or to stay off, from the My Leviton app or the switch's own setup mode | YesCatalog noteLED Status is a configurable entry in the Kasa app's Device Settings page | |
YesCatalog noteSchedules with sunrise and sunset triggers, room scenes, activities and an auto-shutoff timer in the My Leviton app, with schedules stored on the device so they keep running during an internet outage | YesCatalog noteSchedules with fade rate, countdown timer, Away Mode, brightness presets and Smart Actions in the Kasa app | |
| No | No | |
YesCatalog noteOnboard memory keeps the configuration and the schedules, and the switch returns to its last state when power is restored | NoCatalog noteTP-Link states the default-on option exists in its smart bulbs but not in its plugs or smart switches | |
YesCatalog noteStatus LED that illuminates when the lights are off so the switch is easy to find in the dark, and reports connectivity and device status | YesCatalog noteA brightness indicator plus two status LEDs that change colour according to the switch state | |
| 1 | 1 | |
NoCatalog noteThe switch is wired to the load it controls; the wire-free half of the system is the separate Decora Smart Anywhere Companion (DAWSC) | No | |
| Integrations | ||
YesCatalog noteLeviton lists Amazon Alexa control for the D315S | Yes | |
YesCatalog noteLeviton lists Apple Home and Siri, and the switch is Matter certified, so Apple Home commissions it over Matter | NoCatalog noteTP-Link's own model comparison lists the HS220 as compatible with Alexa and Google Home only, while its HomeKit dimmer (KS220) is listed as HomeKit/Alexa/Google Home | |
YesCatalog noteLeviton lists Google Home and Hey Google voice control for the D315S | Yes | |
YesCatalog noteLeviton lists Home Assistant, which is a certified Matter controller; the core Leviton Decora Smart Wi-Fi integration also connects the My Leviton account | YesCatalog noteThe official Home Assistant TP-Link integration lists HS220 among its supported Kasa wall switches | |
YesCatalog noteMatter ready out of the box, certified by the CSA under certificate CSA25943MAT47253-24; the setup code is on the device, on the packaging and in the My Leviton app, and the switch can be commissioned into several Matter controllers | NoCatalog noteTP-Link's Matter compatibility list covers the KS205, KS225, TS15 and TS25 switches, not the HS220 | |
YesCatalog noteLeviton lists SmartThings, and Matter certification grants the Works with SmartThings path | YesCatalog noteThe HS220 user guide points to Samsung SmartThings under Work with Kasa, and the retail box carries the Works with SmartThings badge | |
| Power | ||
120VCatalog noteLoad rating of 120VAC, 60Hz | 120VCatalog noteInput voltage 100-120VAC 60Hz | |
YesCatalog noteLeviton's ratings chart lists LED/CFL loads up to 3A alongside the 15A general use and 1/3 HP motor ratings | YesCatalog noteDimmable CFL up to 150 W | |
| 3A | Not recorded | |
| Not recorded | 150W | |
YesCatalog noteRated for motor loads up to 1/3 HP, so it can switch ceiling fans, exhaust fans and pumps | YesCatalog noteDimmable LED up to 150 W, using leading edge (TRIAC phase cut) dimming | |
| Not recorded | Not recorded | |
| 1/3 HP | 150W | |
YesCatalog noteA neutral wire in the wallbox is required; Leviton's no-neutral Wi-Fi switch is the separate DN15S, which needs the MLWSB bridge | YesCatalog noteA neutral wire in the wall box is required, and the switch works in single pole wiring only | |
YesCatalog noteRated 15A general use at 120VAC, which covers incandescent and other general purpose loads | YesCatalog noteRated for 300W incandescent lighting | |
| 15A | 2.5ACatalog noteTP-Link's own model comparison lists the HS220 rating as 2.5A/120V | |
| Not recorded | 300W | |
| Safety Features | ||
| No | No | |
NoCatalog noteNeither the D315S installation instructions nor Leviton's published specifications describe an over-temperature cutoff | No | |
| No | No | |
| No | No | |
The table matches specifications by section and field. It preserves notes, separates missing data from explicit “No” values, and keeps qualifications attached to their values. No overall winner is assigned from feature counts.
Read our comparison methodology