
Option 1 · Lutron
Lutron Caseta Original Smart Dimmer Switch
Last updated October 2026
View full device profileThe Smart Device Compare comparison
Understand the differences. Decide what matters to your home.
Build another comparison →Before you compare every specification
A summary of selected recorded differences between these wall switches. Check the full specification table below for details and conditions.
These observations are derived from recorded catalog data and have not all been independently verified. Confirm details with the manufacturer before purchasing.
Compare capabilities, compatibility and setup requirements.

Option 1 · Lutron
Last updated October 2026
View full device profile
Option 2 · Moes
Last updated October 2026
View full device profileWhat the catalog tells us
These counts describe the available data, not a quality score. More features do not automatically make a better device.
Consider your setup
Confirm which features appear in Apple Home and whether extra hardware or a subscription is needed for your intended use.
Inspect the specificationsConsider your setup
Check the integration method, supported model and firmware. A catalog Yes does not establish local control or official support.
Inspect the specificationsYour priorities, side by side
Mark the specifications you care about. Open manufacturer sources for verification scope; fields without citations remain catalog data. Expand notes for other qualifications.
Showing 34 of 34 rows. “Not recorded” does not mean “No”.
The dimmer talks to the Lutron Smart Hub, Pico remotes and motion sensors over Lutron's own Clear Connect RF technology instead of Wi-Fi, which is why the lights keep responding when the router is down
Lutron documents the LED behaviour on this model as fixed, with no brightness setting or off option (the newer Diva line uses an adjustable light bar instead)
Scenes, schedules, geofencing, Smart Away and timers from the Lutron app, plus up to 10 Pico remotes or motion sensors paired directly to the dimmer
Touch glass panel, also supports RF433 remote; Smart Life / Tuya app
Power failure memory: if power is interrupted, the control returns to the level it was set to before the interruption
Green status LEDs show the load level and glow softly as a night light when the load is off
The dimmer is wired to the load it controls; the wire-free half of the system is the separate Pico remote
Lutron lists Amazon Alexa among the platforms Caseta works with, through the Lutron Smart Hub
Lutron states the smart hub itself contains Apple Home technology, so Siri controls the lights once the dimmer is paired to it
Lutron lists Google Assistant among the platforms Caseta works with, through the Lutron Smart Hub
The core Lutron Caseta integration talks to the Lutron Caseta Smart Hub (L-BDG2-WH) and exposes wall dimmers as lights
The CSA certified-product database holds no Matter certification for Lutron (only two Zigbee 3.0 Aurora dimmers), and Lutron's own Caseta compatibility page never mentions Matter
Lutron publishes a Caseta page for Samsung SmartThings: lights and shades are controlled from the SmartThings app once the Lutron Smart Hub is connected
Operating voltage 120 V~ 50/60 Hz
Dimmable CFL up to 150 W, per Lutron's in-wall dimmer specification submittal 369804c
Dimmable LED rated for 120 V~, up to 150 W with LED+ forward-phase dimming
Amazon's Product Information lists the dimmer's current rating as 1.25 A
Two-wire dimmer designed for retrofit, so no neutral wire is needed in the wallbox
Single live wire, no neutral required
Incandescent and halogen loads, 25 W minimum and 600 W maximum when not ganged
| Specification | Lutron Caseta Original Smart Dimmer Switch | Moes Smart Wall Touch Light (2 Gang) |
|---|---|---|
| Connectivity | ||
NoCatalog noteThe dimmer talks to the Lutron Smart Hub, Pico remotes and motion sensors over Lutron's own Clear Connect RF technology instead of Wi-Fi, which is why the lights keep responding when the router is down | Yes | |
| No | No | |
| No | No | |
| No | No | |
| No | No | |
| No | No | |
| Features | ||
NoCatalog noteLutron documents the LED behaviour on this model as fixed, with no brightness setting or off option (the newer Diva line uses an adjustable light bar instead) | Not recorded | |
YesCatalog noteScenes, schedules, geofencing, Smart Away and timers from the Lutron app, plus up to 10 Pico remotes or motion sensors paired directly to the dimmer | YesCatalog noteTouch glass panel, also supports RF433 remote; Smart Life / Tuya app | |
| No | No | |
YesCatalog notePower failure memory: if power is interrupted, the control returns to the level it was set to before the interruption | Not recorded | |
YesCatalog noteGreen status LEDs show the load level and glow softly as a night light when the load is off | Not recorded | |
| 1 | 2 | |
NoCatalog noteThe dimmer is wired to the load it controls; the wire-free half of the system is the separate Pico remote | Not recorded | |
| Integrations | ||
Lutron Hub requiredCatalog noteLutron lists Amazon Alexa among the platforms Caseta works with, through the Lutron Smart Hub | Yes | |
Lutron Hub requiredCatalog noteLutron states the smart hub itself contains Apple Home technology, so Siri controls the lights once the dimmer is paired to it | No | |
Lutron Hub requiredCatalog noteLutron lists Google Assistant among the platforms Caseta works with, through the Lutron Smart Hub | Yes | |
Lutron Hub requiredCatalog noteThe core Lutron Caseta integration talks to the Lutron Caseta Smart Hub (L-BDG2-WH) and exposes wall dimmers as lights | Yes | |
NoCatalog noteThe CSA certified-product database holds no Matter certification for Lutron (only two Zigbee 3.0 Aurora dimmers), and Lutron's own Caseta compatibility page never mentions Matter | No | |
Lutron Hub requiredCatalog noteLutron publishes a Caseta page for Samsung SmartThings: lights and shades are controlled from the SmartThings app once the Lutron Smart Hub is connected | No | |
| Power | ||
120VCatalog noteOperating voltage 120 V~ 50/60 Hz | 110V | |
YesCatalog noteDimmable CFL up to 150 W, per Lutron's in-wall dimmer specification submittal 369804c | Not recorded | |
| Not recorded | Not recorded | |
| 150W | Not recorded | |
YesCatalog noteDimmable LED rated for 120 V~, up to 150 W with LED+ forward-phase dimming | Not recorded | |
1.25ACatalog noteAmazon's Product Information lists the dimmer's current rating as 1.25 A | Not recorded | |
| 150W | Not recorded | |
NoCatalog noteTwo-wire dimmer designed for retrofit, so no neutral wire is needed in the wallbox | NoCatalog noteSingle live wire, no neutral required | |
YesCatalog noteIncandescent and halogen loads, 25 W minimum and 600 W maximum when not ganged | Yes | |
| Not recorded | 2.5A | |
| 600W | Not recorded | |
| Safety Features | ||
| No | Not recorded | |
| No | Not recorded | |
| No | Not recorded | |
| No | Not recorded | |
The table matches specifications by section and field. It preserves notes, separates missing data from explicit “No” values, and keeps qualifications attached to their values. No overall winner is assigned from feature counts.
Read our comparison methodology