The Smart Device Compare comparison
Aqara Valve Controller T1 vs YoLink Valve Controller 2 with EVO Valve Operator
Understand the differences. Decide what matters to your home.
Build another comparison →Before you compare every specification
Key differences between Aqara Valve Controller T1 and YoLink Valve Controller 2 with EVO Valve Operator
A summary of selected recorded differences between these water shutoff valves. Check the full specification table below for details and conditions.
Feature differences among your selected devices
- Wired (power): Aqara Valve Controller T1 — No; YoLink Valve Controller 2 with EVO Valve Operator — Yes (The controller can run from the included plug-in 12 V adapter instead of, or together with, its batteries.).
Specifications to check side by side
- Other (connectivity): Aqara Valve Controller T1 — No; YoLink Valve Controller 2 with EVO Valve Operator — LoRa (YoLink hub required) (Up to 1/4 mile in open air to the YoLink hub.).
- Zigbee (connectivity): Aqara Valve Controller T1 — Zigbee Hub required; YoLink Valve Controller 2 with EVO Valve Operator — No.
- Alexa (integrations): Aqara Valve Controller T1 — Aqara Hub required (Aqara lists Alexa among the platforms the valve reaches through Matter over Bridge on an Aqara Zigbee hub (an Alexa Matter controller is also required). The bridge exposes it as an on/off switch, a Matter device type Alexa controls, rather than as a water valve.); YoLink Valve Controller 2 with EVO Valve Operator — YoLink Hub required.
- Apple Home (integrations): Aqara Valve Controller T1 — Aqara Hub required; YoLink Valve Controller 2 with EVO Valve Operator — No (YoLink's compatibility list for the valve controllers is Alexa, Google, IFTTT and Home Assistant, with no Apple Home path.).
Information still to confirm
- 3 of 26 comparison fields lack a resolved value for at least one selected device. Missing information is not evidence that a feature is absent.
- Check the full table and manufacturer documentation before ruling out a device.
These observations are derived from recorded catalog data and have not all been independently verified. Confirm details with the manufacturer before purchasing.
Compare capabilities, compatibility and setup requirements.
Option 2 · YoLink
YoLink Valve Controller 2 with EVO Valve Operator
Last updated October 2026
View full device profileWhat the catalog tells us
Understand the tradeoffs.
These counts describe the available data, not a quality score. More features do not automatically make a better device.
9differences with recorded values for every device
3rows with missing or unspecified information
Consider your setup
Apple Home
- Aqara Valve Controller T1Aqara Hub required
- YoLink Valve Controller 2 with EVO Valve OperatorNo
Confirm which features appear in Apple Home and whether extra hardware or a subscription is needed for your intended use.
Inspect the specificationsConsider your setup
Matter
- Aqara Valve Controller T1Aqara Hub required
- YoLink Valve Controller 2 with EVO Valve OperatorNo
Confirm the exact device type and the features exposed in your chosen platform. Protocol support does not establish feature parity across apps.
Inspect the specificationsYour priorities, side by side
Focus on what changes.
Mark the specifications you care about. Open manufacturer sources for verification scope; fields without citations remain catalog data. Expand notes for other qualifications.
Showing 26 of 26 rows. “Not recorded” does not mean “No”.
Connectivity
- Aqara Valve Controller T1
- No
- YoLink Valve Controller 2 with EVO Valve Operator
- No
- Aqara Valve Controller T1
- No
- YoLink Valve Controller 2 with EVO Valve Operator
- No
- Aqara Valve Controller T1
- No
- YoLink Valve Controller 2 with EVO Valve Operator
- LoRa (YoLink hub required)
Catalog note
Up to 1/4 mile in open air to the YoLink hub.
- Aqara Valve Controller T1
- No
- YoLink Valve Controller 2 with EVO Valve Operator
- No
- Aqara Valve Controller T1
- No
- YoLink Valve Controller 2 with EVO Valve Operator
- No
- Aqara Valve Controller T1
- Zigbee Hub required
- YoLink Valve Controller 2 with EVO Valve Operator
- No
Features
- Aqara Valve Controller T1
- Yes
- YoLink Valve Controller 2 with EVO Valve Operator
- Yes
Catalog note
Schedules, app control and automations with YoLink leak sensors and other devices.
Integrations
- Aqara Valve Controller T1
- Aqara Hub required
Catalog note
Aqara lists Alexa among the platforms the valve reaches through Matter over Bridge on an Aqara Zigbee hub (an Alexa Matter controller is also required). The bridge exposes it as an on/off switch, a Matter device type Alexa controls, rather than as a water valve.
- YoLink Valve Controller 2 with EVO Valve Operator
- YoLink Hub required
- Aqara Valve Controller T1
- Aqara Hub required
- YoLink Valve Controller 2 with EVO Valve Operator
- No
Catalog note
YoLink's compatibility list for the valve controllers is Alexa, Google, IFTTT and Home Assistant, with no Apple Home path.
- Aqara Valve Controller T1
- Aqara Hub required
- YoLink Valve Controller 2 with EVO Valve Operator
- YoLink Hub required
- Aqara Valve Controller T1
- Yes
Catalog note
Zigbee2MQTT supports the valve directly (model VC-X01D, the other model number Aqara publishes for the Valve Controller T1), exposed as a switch with its battery level. Aqara also lists Home Assistant through Matter over Bridge on an Aqara hub.
- YoLink Valve Controller 2 with EVO Valve Operator
- Yes
Catalog note
The official Home Assistant YoLink integration lists this controller as YS5003-UC (Water Valve Controller 2).
- Aqara Valve Controller T1
- Aqara Hub required
- YoLink Valve Controller 2 with EVO Valve Operator
- No
- Aqara Valve Controller T1
- Aqara Hub required
- YoLink Valve Controller 2 with EVO Valve Operator
- No
Catalog note
SmartThings is not on YoLink's compatibility list for this product.
Leak Protection
- Aqara Valve Controller T1
- No
- YoLink Valve Controller 2 with EVO Valve Operator
- No
- Aqara Valve Controller T1
- No
- YoLink Valve Controller 2 with EVO Valve Operator
- No
- Aqara Valve Controller T1
- No
- YoLink Valve Controller 2 with EVO Valve Operator
- No
- Aqara Valve Controller T1
- Yes
Catalog note
With an Aqara water leak sensor paired to the same Aqara hub, the leak-to-shutoff automation runs on the hub over Zigbee. Aqara states the Hub M3 executes automations between its devices locally, so they keep working during internet or cloud outages (push notifications still need the internet).
- YoLink Valve Controller 2 with EVO Valve Operator
- Yes
Catalog note
Once paired device-to-device, a YoLink water leak sensor closes the valve directly over LoRa, with no internet, no app and no AC power; the hub and internet are only needed for the app and notifications.
- Aqara Valve Controller T1
- No
- YoLink Valve Controller 2 with EVO Valve Operator
- No
Power
- Aqara Valve Controller T1
- Not applicable / unspecified
- YoLink Valve Controller 2 with EVO Valve Operator
- Yes
Catalog note
When the controller runs on its adapter, the four AA batteries stay in as backup during a power outage.
- Aqara Valve Controller T1
- 2 years
Manufacturer source
The advertised battery life is up to two years.
Aqara Valve Controller T1 manufacturer product page →- Source section
- Product description
- Model
- Aqara Valve Controller T1
- Region
- Manufacturer product page; no universal regional compatibility implied
- Firmware
- Not specified by this source
- Checked
Indoor installation only; the device is not protected against water ingress. Automatic leak response requires a compatible separate sensor and hub.
Document check only; not a hands-on test or verification of every regional or firmware variant.
- YoLink Valve Controller 2 with EVO Valve Operator
- 2 years
Catalog note
YoLink quotes 2+ years between battery changes in battery-only mode.
- Aqara Valve Controller T1
- 4x AA
Manufacturer source
Four AA batteries power the actuator.
Aqara Valve Controller T1 manufacturer product page →- Source section
- Product description
- Model
- Aqara Valve Controller T1
- Region
- Manufacturer product page; no universal regional compatibility implied
- Firmware
- Not specified by this source
- Checked
Indoor installation only; the device is not protected against water ingress. Automatic leak response requires a compatible separate sensor and hub.
Document check only; not a hands-on test or verification of every regional or firmware variant.
- YoLink Valve Controller 2 with EVO Valve Operator
- 4x AA
- Aqara Valve Controller T1
- No
- YoLink Valve Controller 2 with EVO Valve Operator
- Yes
Catalog note
The controller can run from the included plug-in 12 V adapter instead of, or together with, its batteries.
Valve
- Aqara Valve Controller T1
- Retrofit actuator
Manufacturer source
The actuator retrofits a compatible existing valve.
Aqara Valve Controller T1 manufacturer product page →- Source section
- Product description
- Model
- Aqara Valve Controller T1
- Region
- Manufacturer product page; no universal regional compatibility implied
- Firmware
- Not specified by this source
- Checked
Indoor installation only; the device is not protected against water ingress. Automatic leak response requires a compatible separate sensor and hub.
Document check only; not a hands-on test or verification of every regional or firmware variant.
- YoLink Valve Controller 2 with EVO Valve Operator
- Retrofit actuator
- Aqara Valve Controller T1
- 3.6 N·m
Catalog note
Maximum torque stated by Aqara (3.6 N·m or less).
- YoLink Valve Controller 2 with EVO Valve Operator
- Not recorded
- Aqara Valve Controller T1
- 1/2" to 1"
Manufacturer source
Supported nominal pipe sizes are 1/2, 3/4 and 1 inch.
Aqara Valve Controller T1 manufacturer product page →- Source section
- Product description
- Model
- Aqara Valve Controller T1
- Region
- Manufacturer product page; no universal regional compatibility implied
- Firmware
- Not specified by this source
- Checked
Indoor installation only; the device is not protected against water ingress. Automatic leak response requires a compatible separate sensor and hub.
Document check only; not a hands-on test or verification of every regional or firmware variant.
Catalog note
DN15, DN20 and DN25 valves (1/2, 3/4 and 1 inch) with a lever or butterfly handle. The standard bracket fits pipes up to DN20; DN25 pipes use the pipe clamp from the accessory kit.
- YoLink Valve Controller 2 with EVO Valve Operator
- 1/2" to 2"
Catalog note
YoLink recommends the EVO for ball valves of 1/2", 3/4", 1", 1-1/4", 1-1/2" and 2", attached directly to the valve shaft with a direct-drive adapter; it installs in about 15 minutes with a Phillips screwdriver and also fits PVC ball valves once the handle is removed.
- Aqara Valve Controller T1
- Partially
Catalog note
The Aqara Home app sends a self-check reminder every 30 days, which cannot be turned off, so you cycle the valve and confirm it has not seized. The valve does not run the cycle on its own: Aqara recommends being present to watch it.
- YoLink Valve Controller 2 with EVO Valve Operator
- Not recorded
| Specification | Aqara Valve Controller T1 | YoLink Valve Controller 2 with EVO Valve Operator |
|---|---|---|
| Connectivity | ||
| No | No | |
| No | No | |
| No | LoRa (YoLink hub required)Catalog noteUp to 1/4 mile in open air to the YoLink hub. | |
| No | No | |
| No | No | |
| Zigbee Hub required | No | |
| Features | ||
| Yes | YesCatalog noteSchedules, app control and automations with YoLink leak sensors and other devices. | |
| Integrations | ||
Aqara Hub requiredCatalog noteAqara lists Alexa among the platforms the valve reaches through Matter over Bridge on an Aqara Zigbee hub (an Alexa Matter controller is also required). The bridge exposes it as an on/off switch, a Matter device type Alexa controls, rather than as a water valve. | YoLink Hub required | |
| Aqara Hub required | NoCatalog noteYoLink's compatibility list for the valve controllers is Alexa, Google, IFTTT and Home Assistant, with no Apple Home path. | |
| Aqara Hub required | YoLink Hub required | |
YesCatalog noteZigbee2MQTT supports the valve directly (model VC-X01D, the other model number Aqara publishes for the Valve Controller T1), exposed as a switch with its battery level. Aqara also lists Home Assistant through Matter over Bridge on an Aqara hub. | YesCatalog noteThe official Home Assistant YoLink integration lists this controller as YS5003-UC (Water Valve Controller 2). | |
| Aqara Hub required | No | |
| Aqara Hub required | NoCatalog noteSmartThings is not on YoLink's compatibility list for this product. | |
| Leak Protection | ||
| No | No | |
| No | No | |
| No | No | |
YesCatalog noteWith an Aqara water leak sensor paired to the same Aqara hub, the leak-to-shutoff automation runs on the hub over Zigbee. Aqara states the Hub M3 executes automations between its devices locally, so they keep working during internet or cloud outages (push notifications still need the internet). | YesCatalog noteOnce paired device-to-device, a YoLink water leak sensor closes the valve directly over LoRa, with no internet, no app and no AC power; the hub and internet are only needed for the app and notifications. | |
| No | No | |
| Power | ||
| Not applicable / unspecified | YesCatalog noteWhen the controller runs on its adapter, the four AA batteries stay in as backup during a power outage. | |
2 yearsManufacturer sourceThe advertised battery life is up to two years. Aqara Valve Controller T1 manufacturer product page →
Indoor installation only; the device is not protected against water ingress. Automatic leak response requires a compatible separate sensor and hub. Document check only; not a hands-on test or verification of every regional or firmware variant. | 2 yearsCatalog noteYoLink quotes 2+ years between battery changes in battery-only mode. | |
4x AAManufacturer sourceFour AA batteries power the actuator. Aqara Valve Controller T1 manufacturer product page →
Indoor installation only; the device is not protected against water ingress. Automatic leak response requires a compatible separate sensor and hub. Document check only; not a hands-on test or verification of every regional or firmware variant. | 4x AA | |
| No | YesCatalog noteThe controller can run from the included plug-in 12 V adapter instead of, or together with, its batteries. | |
| Valve | ||
Retrofit actuatorManufacturer sourceThe actuator retrofits a compatible existing valve. Aqara Valve Controller T1 manufacturer product page →
Indoor installation only; the device is not protected against water ingress. Automatic leak response requires a compatible separate sensor and hub. Document check only; not a hands-on test or verification of every regional or firmware variant. | Retrofit actuator | |
3.6 N·mCatalog noteMaximum torque stated by Aqara (3.6 N·m or less). | Not recorded | |
1/2" to 1"Manufacturer sourceSupported nominal pipe sizes are 1/2, 3/4 and 1 inch. Aqara Valve Controller T1 manufacturer product page →
Indoor installation only; the device is not protected against water ingress. Automatic leak response requires a compatible separate sensor and hub. Document check only; not a hands-on test or verification of every regional or firmware variant. Catalog noteDN15, DN20 and DN25 valves (1/2, 3/4 and 1 inch) with a lever or butterfly handle. The standard bracket fits pipes up to DN20; DN25 pipes use the pipe clamp from the accessory kit. | 1/2" to 2"Catalog noteYoLink recommends the EVO for ball valves of 1/2", 3/4", 1", 1-1/4", 1-1/2" and 2", attached directly to the valve shaft with a direct-drive adapter; it installs in about 15 minutes with a Phillips screwdriver and also fits PVC ball valves once the handle is removed. | |
PartiallyCatalog noteThe Aqara Home app sends a self-check reminder every 30 days, which cannot be turned off, so you cycle the valve and confirm it has not seized. The valve does not run the cycle on its own: Aqara recommends being present to watch it. | Not recorded | |
Know what’s behind the comparison.
The table matches specifications by section and field. It preserves notes, separates missing data from explicit “No” values, and keeps qualifications attached to their values. No overall winner is assigned from feature counts.
Read our comparison methodology