The Smart Device Compare comparison

Meross Matter Smart DIY Switch with Energy Monitor vs Sonoff MINI ONE Zigbee Smart Switch

Understand the differences. Decide what matters to your home.

Before you compare every specification

Key differences between Meross Matter Smart DIY Switch with Energy Monitor and Sonoff MINI ONE Zigbee Smart Switch

A summary of selected recorded differences between these relays. Check the full specification table below for details and conditions.

Feature differences among your selected devices

2.4 GHz Wi-Fi (connectivity): Meross Matter Smart DIY Switch with Energy Monitor — Yes (IEEE 802.11 b/g/n, 2.4GHz, 1T1R, with one internal antenna); Sonoff MINI ONE Zigbee Smart Switch — No.
Energy Monitoring (features): Meross Matter Smart DIY Switch with Energy Monitor — Yes (Real-time power plus consumption history and cost estimates in the Meross app); Sonoff MINI ONE Zigbee Smart Switch — No (Power metering is the separate MINI ONE PM model; this one reports no energy data and Zigbee2MQTT exposes none).
Zigbee Router (features): Meross Matter Smart DIY Switch with Energy Monitor — No; Sonoff MINI ONE Zigbee Smart Switch — Yes (SONOFF lists its Zigbee role as Router: 180 m to the gateway by default and 250 m with Turbo mode enabled).

Specifications to check side by side

Zigbee (connectivity): Meross Matter Smart DIY Switch with Energy Monitor — No; Sonoff MINI ONE Zigbee Smart Switch — Zigbee Hub required (Zigbee 3.0 over IEEE 802.15.4, EFR32MG21).
Apple Home (integrations): Meross Matter Smart DIY Switch with Energy Monitor — Yes (Via Matter. Meross also lists HomeKit directly; remote access needs a HomePod, Apple TV or iPad acting as a home hub); Sonoff MINI ONE Zigbee Smart Switch — SONOFF Hub required (The product page states it works with Apple Home via a SONOFF Matter bridge (ZBBridge-U, iHost or eWeLink CUBE with a SONOFF Zigbee dongle). Apple Home has no Zigbee radio of its own.).
Matter (integrations): Meross Matter Smart DIY Switch with Energy Monitor — Yes (Matter over 2.4GHz Wi-Fi, the protocol the product is named for, with multi-admin pairing across Meross, Apple Home, Alexa and Google Home); Sonoff MINI ONE Zigbee Smart Switch — SONOFF Hub required (The switch itself is Zigbee, not Matter: SONOFF republishes it into Matter through its own bridges (ZBBridge-U, iHost, eWeLink CUBE with a SONOFF Zigbee dongle).).
Ac Load Voltage (power): Meross Matter Smart DIY Switch with Energy Monitor — 100-240V; Sonoff MINI ONE Zigbee Smart Switch — 100-240 V (Rated 16A 100-240V~ 50/60Hz).

Information still to confirm

16 of 46 comparison fields lack a resolved value for at least one selected device. Missing information is not evidence that a feature is absent.
Check the full table and manufacturer documentation before ruling out a device.

These observations are derived from recorded catalog data and have not all been independently verified. Confirm details with the manufacturer before purchasing.

Compare capabilities, compatibility and setup requirements.

Option 1 · Meross

Meross Matter Smart DIY Switch with Energy Monitor

Last updated October 2026

View full device profile

Option 2 · Sonoff

Sonoff MINI ONE Zigbee Smart Switch

Last updated October 2026

View full device profile

What the catalog tells us

Understand the tradeoffs.

These counts describe the available data, not a quality score. More features do not automatically make a better device.

8differences with recorded values for every device

16rows with missing or unspecified information

Consider your setup

Apple Home

Meross Matter Smart DIY Switch with Energy MonitorYes
Sonoff MINI ONE Zigbee Smart SwitchSONOFF Hub required

Confirm which features appear in Apple Home and whether extra hardware or a subscription is needed for your intended use.

Inspect the specifications

Consider your setup

Matter

Meross Matter Smart DIY Switch with Energy MonitorYes
Sonoff MINI ONE Zigbee Smart SwitchSONOFF Hub required

Confirm the exact device type and the features exposed in your chosen platform. Protocol support does not establish feature parity across apps.

Inspect the specifications

Your priorities, side by side

Focus on what changes.

Mark the specifications you care about. Open manufacturer sources for verification scope; fields without citations remain catalog data. Expand notes for other qualifications.

Differences onlyMy priorities (0)

Showing 46 of 46 rows. “Not recorded” does not mean “No”.

Reading layout

Connectivity

2.4 GHz Wi-Fi

Meross Matter Smart DIY Switch with Energy Monitor: Yes
Catalog note
IEEE 802.11 b/g/n, 2.4GHz, 1T1R, with one internal antenna
Sonoff MINI ONE Zigbee Smart Switch: No

5 GHz Wi-Fi

Meross Matter Smart DIY Switch with Energy Monitor: No
Sonoff MINI ONE Zigbee Smart Switch: No

Bluetooth

Meross Matter Smart DIY Switch with Energy Monitor: Not recorded
Sonoff MINI ONE Zigbee Smart Switch: Yes
Catalog note
BLE powers Proximity Mode, which lets the phone connect to the switch directly for basic control and settings when no Zigbee gateway is available

Radio Frequency

Meross Matter Smart DIY Switch with Energy Monitor: No
Sonoff MINI ONE Zigbee Smart Switch: No

Thread

Meross Matter Smart DIY Switch with Energy Monitor: No
Sonoff MINI ONE Zigbee Smart Switch: No

Z Wave

Meross Matter Smart DIY Switch with Energy Monitor: No
Sonoff MINI ONE Zigbee Smart Switch: No

Zigbee

Meross Matter Smart DIY Switch with Energy Monitor: No
Sonoff MINI ONE Zigbee Smart Switch: Zigbee Hub required
Catalog note
Zigbee 3.0 over IEEE 802.15.4, EFR32MG21

Features

Automations

Meross Matter Smart DIY Switch with Energy Monitor: Yes
Catalog note
Timers, countdowns, schedules and sunrise/sunset routines in the Meross app, which keep running while the network is offline
Sonoff MINI ONE Zigbee Smart Switch: Yes
Catalog note
Smart timer, smart scene, group control and Zigbee Binding for direct device-to-device local control without the gateway

Din Rail Mount

Meross Matter Smart DIY Switch with Energy Monitor: No
Catalog note
A concealed module for a junction box, a ceiling rose or the appliance's own housing, marked indoor use only
Sonoff MINI ONE Zigbee Smart Switch: No
Catalog note
Designed for EU flush-mounted, 86-type and 120-type wall boxes, 60 mm depth recommended

Dry Contact Mode

Meross Matter Smart DIY Switch with Energy Monitor: No
Catalog note
The output block is L out and N, so the module switches the live wire instead of offering a potential-free contact
Sonoff MINI ONE Zigbee Smart Switch: No

Energy Monitoring

Meross Matter Smart DIY Switch with Energy Monitor

Yes

Manufacturer source

The switch measures electrical consumption.

Meross Matter Smart DIY Switch with Energy Monitor manufacturer product page →

Source section: Product description
Model: Meross Matter Smart DIY Switch with Energy Monitor
Region: US version
Firmware: Not specified by this source
Checked: 2026-10-04

Follow the wiring guide and appliance-specific load restrictions.

Document check only; not a hands-on test or verification of every regional or firmware variant.

Catalog note

Real-time power plus consumption history and cost estimates in the Meross app

Sonoff MINI ONE Zigbee Smart Switch

Catalog note

Power metering is the separate MINI ONE PM model; this one reports no energy data and Zigbee2MQTT exposes none

Interlock Mode

Meross Matter Smart DIY Switch with Energy Monitor: No
Sonoff MINI ONE Zigbee Smart Switch: No

On Off Button

Meross Matter Smart DIY Switch with Energy Monitor: Yes
Catalog note
1 x On/Off button, held for 5 seconds to start a factory reset, next to a single status LED
Sonoff MINI ONE Zigbee Smart Switch: Yes

Ota

Meross Matter Smart DIY Switch with Energy Monitor: Yes
Catalog note
Meross documents firmware upgrades through the Meross app, including for units commissioned into Apple Home, Google Home or Alexa
Sonoff MINI ONE Zigbee Smart Switch: Yes
Catalog note
Over-the-air updates through eWeLink, Zigbee2MQTT and ZHA

Power Off Memory

Meross Matter Smart DIY Switch with Energy Monitor: Not recorded
Sonoff MINI ONE Zigbee Smart Switch: Yes
Catalog note
Power-on state is configurable as On, Off or Keep, plus a delayed power-on timer to stagger loads after an outage

Relay Channels

Meross Matter Smart DIY Switch with Energy Monitor: 1
Sonoff MINI ONE Zigbee Smart Switch: 1

Wet Contact Mode

Meross Matter Smart DIY Switch with Energy Monitor: Yes
Catalog note
L out carries the switched live wire to the load
Sonoff MINI ONE Zigbee Smart Switch: Yes
Catalog note
The two parallel L Out terminals switch mains live to the load

Wireless Switch Mode

Meross Matter Smart DIY Switch with Energy Monitor: Not recorded
Sonoff MINI ONE Zigbee Smart Switch: Yes
Catalog note
Detach relay mode turns the wired wall switch into a smart trigger so connected smart bulbs never lose power

Zigbee Router

Meross Matter Smart DIY Switch with Energy Monitor: No
Sonoff MINI ONE Zigbee Smart Switch: Yes
Catalog note
SONOFF lists its Zigbee role as Router: 180 m to the gateway by default and 250 m with Turbo mode enabled

Integrations

Alexa

Meross Matter Smart DIY Switch with Energy Monitor: Yes
Catalog note
Via Matter
Sonoff MINI ONE Zigbee Smart Switch: Yes
Catalog note
SONOFF's own feature table lists on/off, smart scene and smart timer through Alexa, using an Echo with a built-in Zigbee hub or the eWeLink skill

Apple Home

Meross Matter Smart DIY Switch with Energy Monitor: Yes
Catalog note
Via Matter. Meross also lists HomeKit directly; remote access needs a HomePod, Apple TV or iPad acting as a home hub
Sonoff MINI ONE Zigbee Smart Switch: SONOFF Hub required
Catalog note
The product page states it works with Apple Home via a SONOFF Matter bridge (ZBBridge-U, iHost or eWeLink CUBE with a SONOFF Zigbee dongle). Apple Home has no Zigbee radio of its own.

Google Home

Meross Matter Smart DIY Switch with Energy Monitor: Yes
Catalog note
Via Matter
Sonoff MINI ONE Zigbee Smart Switch: Yes
Catalog note
SONOFF lists Google Home for this model via its Matter bridges or via eWeLink cloud-to-cloud once the switch is added through a SONOFF Zigbee gateway

Home Assistant

Meross Matter Smart DIY Switch with Energy Monitor: Yes
Catalog note
Via Matter. The Amazon listing names Home Assistant as a supported controller
Sonoff MINI ONE Zigbee Smart Switch: Yes
Catalog note
Zigbee2MQTT supports this exact model from version 2.12.1 and exposes state, power-on behaviour, detach relay mode, turbo mode and overheat reporting. ZHA support is still pending a merge, so ZHA users need SONOFF's setup script for the full feature set.

Matter

Meross Matter Smart DIY Switch with Energy Monitor

Yes

Manufacturer source

The MSS715MA supports Matter.

Meross Matter Smart DIY Switch with Energy Monitor manufacturer product page →

Source section: Product description
Model: Meross Matter Smart DIY Switch with Energy Monitor
Region: US version
Firmware: Not specified by this source
Checked: 2026-10-04

Follow the wiring guide and appliance-specific load restrictions.

Document check only; not a hands-on test or verification of every regional or firmware variant.

Catalog note

Matter over 2.4GHz Wi-Fi, the protocol the product is named for, with multi-admin pairing across Meross, Apple Home, Alexa and Google Home

Sonoff MINI ONE Zigbee Smart Switch

SONOFF Hub required

Catalog note

The switch itself is Zigbee, not Matter: SONOFF republishes it into Matter through its own bridges (ZBBridge-U, iHost, eWeLink CUBE with a SONOFF Zigbee dongle).

SmartThings

Meross Matter Smart DIY Switch with Energy Monitor: Yes
Catalog note
Via Matter. The Amazon listing names SmartThings as a supported controller
Sonoff MINI ONE Zigbee Smart Switch: Yes
Catalog note
SONOFF's feature table lists SmartThings through the Aeotec SmartThings Hub (V3), which pairs it as a standard Zigbee device

Power

Ac Load Voltage

Meross Matter Smart DIY Switch with Energy Monitor: 100-240V
Sonoff MINI ONE Zigbee Smart Switch: 100-240 V
Catalog note
Rated 16A 100-240V~ 50/60Hz

Ac Power

Meross Matter Smart DIY Switch with Energy Monitor: Yes
Catalog note
Input 100-240V~, 50/60Hz; output 100-240V~, 50/60Hz, 16.0A max, as printed on the unit
Sonoff MINI ONE Zigbee Smart Switch: Yes

Capacitive Load

Meross Matter Smart DIY Switch with Energy Monitor: Not recorded
Sonoff MINI ONE Zigbee Smart Switch: Not recorded

Capacitive Maximum Load Current

Meross Matter Smart DIY Switch with Energy Monitor: Not recorded
Sonoff MINI ONE Zigbee Smart Switch: Not recorded

Capacitive Maximum Load Power

Meross Matter Smart DIY Switch with Energy Monitor: Not recorded
Sonoff MINI ONE Zigbee Smart Switch: Not recorded

Dc Load Voltage

Meross Matter Smart DIY Switch with Energy Monitor: Not applicable / unspecified
Sonoff MINI ONE Zigbee Smart Switch: Not applicable / unspecified

Dc Maximum Load Current

Meross Matter Smart DIY Switch with Energy Monitor: Not applicable / unspecified
Sonoff MINI ONE Zigbee Smart Switch: Not applicable / unspecified

Dc Maximum Load Power

Meross Matter Smart DIY Switch with Energy Monitor: Not applicable / unspecified
Sonoff MINI ONE Zigbee Smart Switch: Not applicable / unspecified

Dc Power

Meross Matter Smart DIY Switch with Energy Monitor: No
Catalog note
Mains AC only: the label rates both input and output as 100-240V~ 50/60Hz
Sonoff MINI ONE Zigbee Smart Switch: No

Idle Consumption

Meross Matter Smart DIY Switch with Energy Monitor: Not recorded
Sonoff MINI ONE Zigbee Smart Switch: Not recorded

Inductive Load

Meross Matter Smart DIY Switch with Energy Monitor: Not recorded
Sonoff MINI ONE Zigbee Smart Switch: Not recorded

Inductive Maximum Load Current

Meross Matter Smart DIY Switch with Energy Monitor: Not recorded
Sonoff MINI ONE Zigbee Smart Switch: Not recorded

Inductive Maximum Load Power

Meross Matter Smart DIY Switch with Energy Monitor: Not recorded
Sonoff MINI ONE Zigbee Smart Switch: Not recorded

Neutral Required

Meross Matter Smart DIY Switch with Energy Monitor: Yes
Catalog note
The listing states the module needs a neutral wire, and the input block has L, S in and N terminals
Sonoff MINI ONE Zigbee Smart Switch: Yes
Catalog note
SONOFF states a neutral wire is required, and the wiring diagram uses N, L, two parallel L Out terminals and the S1 external switch input

Resistive Load

Meross Matter Smart DIY Switch with Energy Monitor: Yes
Catalog note
Meross rates it for high-draw resistive appliances: water heaters, ovens, electric heaters and underfloor heating
Sonoff MINI ONE Zigbee Smart Switch: Yes

Resistive Maximum Load Current

Meross Matter Smart DIY Switch with Energy Monitor

16A

Manufacturer source

The stated maximum current is 16 A.

Meross Matter Smart DIY Switch with Energy Monitor manufacturer product page →

Source section: Product description
Model: Meross Matter Smart DIY Switch with Energy Monitor
Region: US version
Firmware: Not specified by this source
Checked: 2026-10-04

Follow the wiring guide and appliance-specific load restrictions.

Document check only; not a hands-on test or verification of every regional or firmware variant.

Sonoff MINI ONE Zigbee Smart Switch

16A

Catalog note

60% higher than the ZBMINIR2, which is rated 10A

Resistive Maximum Load Power

Meross Matter Smart DIY Switch with Energy Monitor: 3800W
Catalog note
The official safety graphic states a maximum output of 16A, 3800W
Sonoff MINI ONE Zigbee Smart Switch: 3840W

Safety Features

Overcurrent Protection

Meross Matter Smart DIY Switch with Energy Monitor: No
Sonoff MINI ONE Zigbee Smart Switch: Not recorded

Overheating Protection

Meross Matter Smart DIY Switch with Energy Monitor: Yes
Catalog note
Overheat protection plus a PC V0 flame-retardant housing
Sonoff MINI ONE Zigbee Smart Switch: Yes
Catalog note
Built-in high-precision temperature sensing cuts the relay output when the temperature approaches the safety threshold, and Zigbee2MQTT exposes the resulting device_overheated attribute

Overpower Protection

Meross Matter Smart DIY Switch with Energy Monitor: No
Sonoff MINI ONE Zigbee Smart Switch: Not recorded

Overvoltage Protection

Meross Matter Smart DIY Switch with Energy Monitor: No
Catalog note
Meross's safety specification lists only the flame-retardant housing, the 16A/3800W maximum and overheat protection
Sonoff MINI ONE Zigbee Smart Switch: Not recorded

Specifications for Meross Matter Smart DIY Switch with Energy Monitor versus Sonoff MINI ONE Zigbee Smart Switch
Specification	Meross Matter Smart DIY Switch with Energy Monitor	Sonoff MINI ONE Zigbee Smart Switch
Connectivity
2.4 GHz Wi-Fi	Yes Catalog note IEEE 802.11 b/g/n, 2.4GHz, 1T1R, with one internal antenna	No
5 GHz Wi-Fi	No	No
Bluetooth	Not recorded	Yes Catalog note BLE powers Proximity Mode, which lets the phone connect to the switch directly for basic control and settings when no Zigbee gateway is available
Radio Frequency	No	No
Thread	No	No
Z Wave	No	No
Zigbee	No	Zigbee Hub required Catalog note Zigbee 3.0 over IEEE 802.15.4, EFR32MG21
Features
Automations	Yes Catalog note Timers, countdowns, schedules and sunrise/sunset routines in the Meross app, which keep running while the network is offline	Yes Catalog note Smart timer, smart scene, group control and Zigbee Binding for direct device-to-device local control without the gateway
Din Rail Mount	No Catalog note A concealed module for a junction box, a ceiling rose or the appliance's own housing, marked indoor use only	No Catalog note Designed for EU flush-mounted, 86-type and 120-type wall boxes, 60 mm depth recommended
Dry Contact Mode	No Catalog note The output block is L out and N, so the module switches the live wire instead of offering a potential-free contact	No
Energy Monitoring	Yes Manufacturer source The switch measures electrical consumption. Meross Matter Smart DIY Switch with Energy Monitor manufacturer product page → Source section Product description Model Meross Matter Smart DIY Switch with Energy Monitor Region US version Firmware Not specified by this source Checked 2026-10-04 Follow the wiring guide and appliance-specific load restrictions. Document check only; not a hands-on test or verification of every regional or firmware variant. Catalog note Real-time power plus consumption history and cost estimates in the Meross app	No Catalog note Power metering is the separate MINI ONE PM model; this one reports no energy data and Zigbee2MQTT exposes none
Interlock Mode	No	No
On Off Button	Yes Catalog note 1 x On/Off button, held for 5 seconds to start a factory reset, next to a single status LED	Yes
Ota	Yes Catalog note Meross documents firmware upgrades through the Meross app, including for units commissioned into Apple Home, Google Home or Alexa	Yes Catalog note Over-the-air updates through eWeLink, Zigbee2MQTT and ZHA
Power Off Memory	Not recorded	Yes Catalog note Power-on state is configurable as On, Off or Keep, plus a delayed power-on timer to stagger loads after an outage
Relay Channels	1	1
Wet Contact Mode	Yes Catalog note L out carries the switched live wire to the load	Yes Catalog note The two parallel L Out terminals switch mains live to the load
Wireless Switch Mode	Not recorded	Yes Catalog note Detach relay mode turns the wired wall switch into a smart trigger so connected smart bulbs never lose power
Zigbee Router	No	Yes Catalog note SONOFF lists its Zigbee role as Router: 180 m to the gateway by default and 250 m with Turbo mode enabled
Integrations
Alexa	Yes Catalog note Via Matter	Yes Catalog note SONOFF's own feature table lists on/off, smart scene and smart timer through Alexa, using an Echo with a built-in Zigbee hub or the eWeLink skill
Apple Home	Yes Catalog note Via Matter. Meross also lists HomeKit directly; remote access needs a HomePod, Apple TV or iPad acting as a home hub	SONOFF Hub required Catalog note The product page states it works with Apple Home via a SONOFF Matter bridge (ZBBridge-U, iHost or eWeLink CUBE with a SONOFF Zigbee dongle). Apple Home has no Zigbee radio of its own.
Google Home	Yes Catalog note Via Matter	Yes Catalog note SONOFF lists Google Home for this model via its Matter bridges or via eWeLink cloud-to-cloud once the switch is added through a SONOFF Zigbee gateway
Home Assistant	Yes Catalog note Via Matter. The Amazon listing names Home Assistant as a supported controller	Yes Catalog note Zigbee2MQTT supports this exact model from version 2.12.1 and exposes state, power-on behaviour, detach relay mode, turbo mode and overheat reporting. ZHA support is still pending a merge, so ZHA users need SONOFF's setup script for the full feature set.
Matter	Yes Manufacturer source The MSS715MA supports Matter. Meross Matter Smart DIY Switch with Energy Monitor manufacturer product page → Source section Product description Model Meross Matter Smart DIY Switch with Energy Monitor Region US version Firmware Not specified by this source Checked 2026-10-04 Follow the wiring guide and appliance-specific load restrictions. Document check only; not a hands-on test or verification of every regional or firmware variant. Catalog note Matter over 2.4GHz Wi-Fi, the protocol the product is named for, with multi-admin pairing across Meross, Apple Home, Alexa and Google Home	SONOFF Hub required Catalog note The switch itself is Zigbee, not Matter: SONOFF republishes it into Matter through its own bridges (ZBBridge-U, iHost, eWeLink CUBE with a SONOFF Zigbee dongle).
SmartThings	Yes Catalog note Via Matter. The Amazon listing names SmartThings as a supported controller	Yes Catalog note SONOFF's feature table lists SmartThings through the Aeotec SmartThings Hub (V3), which pairs it as a standard Zigbee device
Power
Ac Load Voltage	100-240V	100-240 V Catalog note Rated 16A 100-240V~ 50/60Hz
Ac Power	Yes Catalog note Input 100-240V~, 50/60Hz; output 100-240V~, 50/60Hz, 16.0A max, as printed on the unit	Yes
Capacitive Load	Not recorded	Not recorded
Capacitive Maximum Load Current	Not recorded	Not recorded
Capacitive Maximum Load Power	Not recorded	Not recorded
Dc Load Voltage	Not applicable / unspecified	Not applicable / unspecified
Dc Maximum Load Current	Not applicable / unspecified	Not applicable / unspecified
Dc Maximum Load Power	Not applicable / unspecified	Not applicable / unspecified
Dc Power	No Catalog note Mains AC only: the label rates both input and output as 100-240V~ 50/60Hz	No
Idle Consumption	Not recorded	Not recorded
Inductive Load	Not recorded	Not recorded
Inductive Maximum Load Current	Not recorded	Not recorded
Inductive Maximum Load Power	Not recorded	Not recorded
Neutral Required	Yes Catalog note The listing states the module needs a neutral wire, and the input block has L, S in and N terminals	Yes Catalog note SONOFF states a neutral wire is required, and the wiring diagram uses N, L, two parallel L Out terminals and the S1 external switch input
Resistive Load	Yes Catalog note Meross rates it for high-draw resistive appliances: water heaters, ovens, electric heaters and underfloor heating	Yes
Resistive Maximum Load Current	16A Manufacturer source The stated maximum current is 16 A. Meross Matter Smart DIY Switch with Energy Monitor manufacturer product page → Source section Product description Model Meross Matter Smart DIY Switch with Energy Monitor Region US version Firmware Not specified by this source Checked 2026-10-04 Follow the wiring guide and appliance-specific load restrictions. Document check only; not a hands-on test or verification of every regional or firmware variant.	16A Catalog note 60% higher than the ZBMINIR2, which is rated 10A
Resistive Maximum Load Power	3800W Catalog note The official safety graphic states a maximum output of 16A, 3800W	3840W
Safety Features
Overcurrent Protection	No	Not recorded
Overheating Protection	Yes Catalog note Overheat protection plus a PC V0 flame-retardant housing	Yes Catalog note Built-in high-precision temperature sensing cuts the relay output when the temperature approaches the safety threshold, and Zigbee2MQTT exposes the resulting device_overheated attribute
Overpower Protection	No	Not recorded
Overvoltage Protection	No Catalog note Meross's safety specification lists only the flame-retardant housing, the 16A/3800W maximum and overheat protection	Not recorded

Know what’s behind the comparison.

The table matches specifications by section and field. It preserves notes, separates missing data from explicit “No” values, and keeps qualifications attached to their values. No overall winner is assigned from feature counts.

Read our comparison methodology