Sonoff MINI ONE Zigbee Smart Switch

Power metering is the separate MINI ONE PM model; this one reports no energy data and Zigbee2MQTT exposes none

Power-on state is configurable as On, Off or Keep, plus a delayed power-on timer to stagger loads after an outage

Detach relay mode turns the wired wall switch into a smart trigger so connected smart bulbs never lose power

The two parallel L Out terminals switch mains live to the load

Designed for EU flush-mounted, 86-type and 120-type wall boxes, 60 mm depth recommended

Smart timer, smart scene, group control and Zigbee Binding for direct device-to-device local control without the gateway

SONOFF lists its Zigbee role as Router: 180 m to the gateway by default and 250 m with Turbo mode enabled

Over-the-air updates through eWeLink, Zigbee2MQTT and ZHA

Rated 16A 100-240V~ 50/60Hz

60% higher than the ZBMINIR2, which is rated 10A

SONOFF states a neutral wire is required, and the wiring diagram uses N, L, two parallel L Out terminals and the S1 external switch input

BLE powers Proximity Mode, which lets the phone connect to the switch directly for basic control and settings when no Zigbee gateway is available

Zigbee 3.0 over IEEE 802.15.4, EFR32MG21

SONOFF lists Google Home for this model via its Matter bridges or via eWeLink cloud-to-cloud once the switch is added through a SONOFF Zigbee gateway

SONOFF's own feature table lists on/off, smart scene and smart timer through Alexa, using an Echo with a built-in Zigbee hub or the eWeLink skill

The product page states it works with Apple Home via a SONOFF Matter bridge (ZBBridge-U, iHost or eWeLink CUBE with a SONOFF Zigbee dongle). Apple Home has no Zigbee radio of its own.

SONOFF's feature table lists SmartThings through the Aeotec SmartThings Hub (V3), which pairs it as a standard Zigbee device

Zigbee2MQTT supports this exact model from version 2.12.1 and exposes state, power-on behaviour, detach relay mode, turbo mode and overheat reporting. ZHA support is still pending a merge, so ZHA users need SONOFF's setup script for the full feature set.

The switch itself is Zigbee, not Matter: SONOFF republishes it into Matter through its own bridges (ZBBridge-U, iHost, eWeLink CUBE with a SONOFF Zigbee dongle).

Built-in high-precision temperature sensing cuts the relay output when the temperature approaches the safety threshold, and Zigbee2MQTT exposes the resulting device_overheated attribute