The Smart Device Compare comparison

NodOn Zigbee Multifunction Relay Switch with Metering vs Sonoff MINI ONE Zigbee Smart Switch

Understand the differences. Decide what matters to your home.

Before you compare every specification

Key differences between NodOn Zigbee Multifunction Relay Switch with Metering and Sonoff MINI ONE Zigbee Smart Switch

A summary of selected recorded differences between these relays. Check the full specification table below for details and conditions.

Feature differences among your selected devices

Bluetooth (connectivity): NodOn Zigbee Multifunction Relay Switch with Metering — No; Sonoff MINI ONE Zigbee Smart Switch — Yes (BLE powers Proximity Mode, which lets the phone connect to the switch directly for basic control and settings when no Zigbee gateway is available).
Dry Contact Mode (features): NodOn Zigbee Multifunction Relay Switch with Metering — Yes (The output is potential-free, used as a held dry contact for a boiler or water heater and as a pulsed dry contact for gates, garage doors and electric latches.); Sonoff MINI ONE Zigbee Smart Switch — No.
Energy Monitoring (features): NodOn Zigbee Multifunction Relay Switch with Metering — Yes (Measures instantaneous power (W) and cumulative energy (Wh), which Zigbee2MQTT exposes as the power and energy properties. The measurement is not available when the module is wired as a dry contact.); Sonoff MINI ONE Zigbee Smart Switch — No (Power metering is the separate MINI ONE PM model; this one reports no energy data and Zigbee2MQTT exposes none).
On Off Button (features): NodOn Zigbee Multifunction Relay Switch with Metering — No; Sonoff MINI ONE Zigbee Smart Switch — Yes.

Specifications to check side by side

Alexa (integrations): NodOn Zigbee Multifunction Relay Switch with Metering — Partially (On/off control only. Energy consumption is not available through Alexa.); Sonoff MINI ONE Zigbee Smart Switch — Yes (SONOFF's own feature table lists on/off, smart scene and smart timer through Alexa, using an Echo with a built-in Zigbee hub or the eWeLink skill).
Apple Home (integrations): NodOn Zigbee Multifunction Relay Switch with Metering — No; Sonoff MINI ONE Zigbee Smart Switch — SONOFF Hub required (The product page states it works with Apple Home via a SONOFF Matter bridge (ZBBridge-U, iHost or eWeLink CUBE with a SONOFF Zigbee dongle). Apple Home has no Zigbee radio of its own.).
Matter (integrations): NodOn Zigbee Multifunction Relay Switch with Metering — No; Sonoff MINI ONE Zigbee Smart Switch — SONOFF Hub required (The switch itself is Zigbee, not Matter: SONOFF republishes it into Matter through its own bridges (ZBBridge-U, iHost, eWeLink CUBE with a SONOFF Zigbee dongle).).
SmartThings (integrations): NodOn Zigbee Multifunction Relay Switch with Metering — Partially (Compatible with Samsung SmartThings, though support may be limited.); Sonoff MINI ONE Zigbee Smart Switch — Yes (SONOFF's feature table lists SmartThings through the Aeotec SmartThings Hub (V3), which pairs it as a standard Zigbee device).

Information still to confirm

14 of 46 comparison fields lack a resolved value for at least one selected device. Missing information is not evidence that a feature is absent.
Check the full table and manufacturer documentation before ruling out a device.

These observations are derived from recorded catalog data and have not all been independently verified. Confirm details with the manufacturer before purchasing.

Compare capabilities, compatibility and setup requirements.

Option 1 · NodOn

NodOn Zigbee Multifunction Relay Switch with Metering

Last updated October 2026

View full device profile

Option 2 · Sonoff

Sonoff MINI ONE Zigbee Smart Switch

Last updated October 2026

View full device profile

What the catalog tells us

Understand the tradeoffs.

These counts describe the available data, not a quality score. More features do not automatically make a better device.

12differences with recorded values for every device

14rows with missing or unspecified information

Consider your setup

Apple Home

NodOn Zigbee Multifunction Relay Switch with MeteringNo
Sonoff MINI ONE Zigbee Smart SwitchSONOFF Hub required

Confirm which features appear in Apple Home and whether extra hardware or a subscription is needed for your intended use.

Inspect the specifications

Consider your setup

Matter

NodOn Zigbee Multifunction Relay Switch with MeteringNo
Sonoff MINI ONE Zigbee Smart SwitchSONOFF Hub required

Confirm the exact device type and the features exposed in your chosen platform. Protocol support does not establish feature parity across apps.

Inspect the specifications

Your priorities, side by side

Focus on what changes.

Mark the specifications you care about. Open manufacturer sources for verification scope; fields without citations remain catalog data. Expand notes for other qualifications.

Differences onlyMy priorities (0)

Showing 46 of 46 rows. “Not recorded” does not mean “No”.

Reading layout

Connectivity

2.4 GHz Wi-Fi

NodOn Zigbee Multifunction Relay Switch with Metering: No
Sonoff MINI ONE Zigbee Smart Switch: No

5 GHz Wi-Fi

NodOn Zigbee Multifunction Relay Switch with Metering: No
Sonoff MINI ONE Zigbee Smart Switch: No

Bluetooth

NodOn Zigbee Multifunction Relay Switch with Metering: No
Sonoff MINI ONE Zigbee Smart Switch: Yes
Catalog note
BLE powers Proximity Mode, which lets the phone connect to the switch directly for basic control and settings when no Zigbee gateway is available

Radio Frequency

NodOn Zigbee Multifunction Relay Switch with Metering: No
Sonoff MINI ONE Zigbee Smart Switch: No

Thread

NodOn Zigbee Multifunction Relay Switch with Metering: No
Sonoff MINI ONE Zigbee Smart Switch: No

Z Wave

NodOn Zigbee Multifunction Relay Switch with Metering: No
Sonoff MINI ONE Zigbee Smart Switch: No

Zigbee

NodOn Zigbee Multifunction Relay Switch with Metering: Zigbee Hub required
Sonoff MINI ONE Zigbee Smart Switch: Zigbee Hub required
Catalog note
Zigbee 3.0 over IEEE 802.15.4, EFR32MG21

Features

Automations

NodOn Zigbee Multifunction Relay Switch with Metering: Yes
Sonoff MINI ONE Zigbee Smart Switch: Yes
Catalog note
Smart timer, smart scene, group control and Zigbee Binding for direct device-to-device local control without the gateway

Din Rail Mount

NodOn Zigbee Multifunction Relay Switch with Metering: No
Catalog note
A flush-mount module; panel installation needs the optional NodOn DIN Rail Box accessory.
Sonoff MINI ONE Zigbee Smart Switch: No
Catalog note
Designed for EU flush-mounted, 86-type and 120-type wall boxes, 60 mm depth recommended

Dry Contact Mode

NodOn Zigbee Multifunction Relay Switch with Metering: Yes
Catalog note
The output is potential-free, used as a held dry contact for a boiler or water heater and as a pulsed dry contact for gates, garage doors and electric latches.
Sonoff MINI ONE Zigbee Smart Switch: No

Energy Monitoring

NodOn Zigbee Multifunction Relay Switch with Metering

Yes

Manufacturer source

The relay measures instantaneous power and accumulated energy.

NodOn Zigbee Multifunction Relay Switch with Metering manufacturer product page →

Source section: SIN-4-1-21 technical data
Model: NodOn Zigbee Multifunction Relay Switch with Metering
Region: Manufacturer product page; no universal regional compatibility implied
Firmware: Not specified by this source
Checked: 2026-10-04

Check load type and installation requirements; the maximum is not a rating for every appliance.

Document check only; not a hands-on test or verification of every regional or firmware variant.

Catalog note

Measures instantaneous power (W) and cumulative energy (Wh), which Zigbee2MQTT exposes as the power and energy properties. The measurement is not available when the module is wired as a dry contact.

Sonoff MINI ONE Zigbee Smart Switch

Catalog note

Power metering is the separate MINI ONE PM model; this one reports no energy data and Zigbee2MQTT exposes none

Interlock Mode

NodOn Zigbee Multifunction Relay Switch with Metering: No
Sonoff MINI ONE Zigbee Smart Switch: No

On Off Button

NodOn Zigbee Multifunction Relay Switch with Metering: No
Sonoff MINI ONE Zigbee Smart Switch: Yes

Ota

NodOn Zigbee Multifunction Relay Switch with Metering: Yes
Sonoff MINI ONE Zigbee Smart Switch: Yes
Catalog note
Over-the-air updates through eWeLink, Zigbee2MQTT and ZHA

Power Off Memory

NodOn Zigbee Multifunction Relay Switch with Metering: Yes
Sonoff MINI ONE Zigbee Smart Switch: Yes
Catalog note
Power-on state is configurable as On, Off or Keep, plus a delayed power-on timer to stagger loads after an outage

Relay Channels

NodOn Zigbee Multifunction Relay Switch with Metering: 1
Sonoff MINI ONE Zigbee Smart Switch: 1

Wet Contact Mode

NodOn Zigbee Multifunction Relay Switch with Metering: Yes
Catalog note
The potential applied to the input terminal passes through to the output, so it can switch a live load such as a socket or a lighting circuit.
Sonoff MINI ONE Zigbee Smart Switch: Yes
Catalog note
The two parallel L Out terminals switch mains live to the load

Wireless Switch Mode

NodOn Zigbee Multifunction Relay Switch with Metering: Yes
Catalog note
A wired switch is optional on the input terminal, and the module auto-detects a monostable or bistable switch, so an existing wall switch keeps working and can drive automations.
Sonoff MINI ONE Zigbee Smart Switch: Yes
Catalog note
Detach relay mode turns the wired wall switch into a smart trigger so connected smart bulbs never lose power

Zigbee Router

NodOn Zigbee Multifunction Relay Switch with Metering: Yes
Catalog note
Mains-powered. Every NodOn SIN micromodule acts as a Zigbee router.
Sonoff MINI ONE Zigbee Smart Switch: Yes
Catalog note
SONOFF lists its Zigbee role as Router: 180 m to the gateway by default and 250 m with Turbo mode enabled

Integrations

Alexa

NodOn Zigbee Multifunction Relay Switch with Metering: Partially
Catalog note
On/off control only. Energy consumption is not available through Alexa.
Sonoff MINI ONE Zigbee Smart Switch: Yes
Catalog note
SONOFF's own feature table lists on/off, smart scene and smart timer through Alexa, using an Echo with a built-in Zigbee hub or the eWeLink skill

Apple Home

NodOn Zigbee Multifunction Relay Switch with Metering: No
Sonoff MINI ONE Zigbee Smart Switch: SONOFF Hub required
Catalog note
The product page states it works with Apple Home via a SONOFF Matter bridge (ZBBridge-U, iHost or eWeLink CUBE with a SONOFF Zigbee dongle). Apple Home has no Zigbee radio of its own.

Google Home

NodOn Zigbee Multifunction Relay Switch with Metering: No
Catalog note
Not compatible with Google Home.
Sonoff MINI ONE Zigbee Smart Switch: Yes
Catalog note
SONOFF lists Google Home for this model via its Matter bridges or via eWeLink cloud-to-cloud once the switch is added through a SONOFF Zigbee gateway

Home Assistant

NodOn Zigbee Multifunction Relay Switch with Metering: Yes
Catalog note
Works with Home Assistant through ZHA and through Zigbee2MQTT.
Sonoff MINI ONE Zigbee Smart Switch: Yes
Catalog note
Zigbee2MQTT supports this exact model from version 2.12.1 and exposes state, power-on behaviour, detach relay mode, turbo mode and overheat reporting. ZHA support is still pending a merge, so ZHA users need SONOFF's setup script for the full feature set.

Matter

NodOn Zigbee Multifunction Relay Switch with Metering: No
Sonoff MINI ONE Zigbee Smart Switch: SONOFF Hub required
Catalog note
The switch itself is Zigbee, not Matter: SONOFF republishes it into Matter through its own bridges (ZBBridge-U, iHost, eWeLink CUBE with a SONOFF Zigbee dongle).

SmartThings

NodOn Zigbee Multifunction Relay Switch with Metering: Partially
Catalog note
Compatible with Samsung SmartThings, though support may be limited.
Sonoff MINI ONE Zigbee Smart Switch: Yes
Catalog note
SONOFF's feature table lists SmartThings through the Aeotec SmartThings Hub (V3), which pairs it as a standard Zigbee device

Power

Ac Load Voltage

NodOn Zigbee Multifunction Relay Switch with Metering: 230 V
Sonoff MINI ONE Zigbee Smart Switch: 100-240 V
Catalog note
Rated 16A 100-240V~ 50/60Hz

Ac Power

NodOn Zigbee Multifunction Relay Switch with Metering: Yes
Sonoff MINI ONE Zigbee Smart Switch: Yes

Capacitive Load

NodOn Zigbee Multifunction Relay Switch with Metering: Yes
Sonoff MINI ONE Zigbee Smart Switch: Not recorded

Capacitive Maximum Load Current

NodOn Zigbee Multifunction Relay Switch with Metering: Not recorded
Sonoff MINI ONE Zigbee Smart Switch: Not recorded

Capacitive Maximum Load Power

NodOn Zigbee Multifunction Relay Switch with Metering: Not recorded
Sonoff MINI ONE Zigbee Smart Switch: Not recorded

Dc Load Voltage

NodOn Zigbee Multifunction Relay Switch with Metering: Not recorded
Sonoff MINI ONE Zigbee Smart Switch: Not applicable / unspecified

Dc Maximum Load Current

NodOn Zigbee Multifunction Relay Switch with Metering: Not recorded
Sonoff MINI ONE Zigbee Smart Switch: Not applicable / unspecified

Dc Maximum Load Power

NodOn Zigbee Multifunction Relay Switch with Metering: Not recorded
Sonoff MINI ONE Zigbee Smart Switch: Not applicable / unspecified

Dc Power

NodOn Zigbee Multifunction Relay Switch with Metering: Not recorded
Sonoff MINI ONE Zigbee Smart Switch: No

Idle Consumption

NodOn Zigbee Multifunction Relay Switch with Metering: <1W
Sonoff MINI ONE Zigbee Smart Switch: Not recorded

Inductive Load

NodOn Zigbee Multifunction Relay Switch with Metering: Yes
Sonoff MINI ONE Zigbee Smart Switch: Not recorded

Inductive Maximum Load Current

NodOn Zigbee Multifunction Relay Switch with Metering: Not recorded
Sonoff MINI ONE Zigbee Smart Switch: Not recorded

Inductive Maximum Load Power

NodOn Zigbee Multifunction Relay Switch with Metering: Not recorded
Sonoff MINI ONE Zigbee Smart Switch: Not recorded

Neutral Required

NodOn Zigbee Multifunction Relay Switch with Metering: Yes
Sonoff MINI ONE Zigbee Smart Switch: Yes
Catalog note
SONOFF states a neutral wire is required, and the wiring diagram uses N, L, two parallel L Out terminals and the S1 external switch input

Resistive Load

NodOn Zigbee Multifunction Relay Switch with Metering: Yes
Sonoff MINI ONE Zigbee Smart Switch: Yes

Resistive Maximum Load Current

NodOn Zigbee Multifunction Relay Switch with Metering

14A

Manufacturer source

The stated switching current is 14 A at 230 V AC.

NodOn Zigbee Multifunction Relay Switch with Metering manufacturer product page →

Source section: SIN-4-1-21 technical data
Model: NodOn Zigbee Multifunction Relay Switch with Metering
Region: Manufacturer product page; no universal regional compatibility implied
Firmware: Not specified by this source
Checked: 2026-10-04

Check load type and installation requirements; the maximum is not a rating for every appliance.

Document check only; not a hands-on test or verification of every regional or firmware variant.

Sonoff MINI ONE Zigbee Smart Switch

16A

Catalog note

60% higher than the ZBMINIR2, which is rated 10A

Resistive Maximum Load Power

NodOn Zigbee Multifunction Relay Switch with Metering

3000W

Manufacturer source

The stated maximum switching power is 3000 W.

NodOn Zigbee Multifunction Relay Switch with Metering manufacturer product page →

Source section: SIN-4-1-21 technical data
Model: NodOn Zigbee Multifunction Relay Switch with Metering
Region: Manufacturer product page; no universal regional compatibility implied
Firmware: Not specified by this source
Checked: 2026-10-04

Check load type and installation requirements; the maximum is not a rating for every appliance.

Document check only; not a hands-on test or verification of every regional or firmware variant.

Sonoff MINI ONE Zigbee Smart Switch

3840W

Safety Features

Overcurrent Protection

NodOn Zigbee Multifunction Relay Switch with Metering: Yes
Sonoff MINI ONE Zigbee Smart Switch: Not recorded

Overheating Protection

NodOn Zigbee Multifunction Relay Switch with Metering: Yes
Sonoff MINI ONE Zigbee Smart Switch: Yes
Catalog note
Built-in high-precision temperature sensing cuts the relay output when the temperature approaches the safety threshold, and Zigbee2MQTT exposes the resulting device_overheated attribute

Overpower Protection

NodOn Zigbee Multifunction Relay Switch with Metering: Yes
Sonoff MINI ONE Zigbee Smart Switch: Not recorded

Overvoltage Protection

NodOn Zigbee Multifunction Relay Switch with Metering: Yes
Sonoff MINI ONE Zigbee Smart Switch: Not recorded

Specifications for NodOn Zigbee Multifunction Relay Switch with Metering versus Sonoff MINI ONE Zigbee Smart Switch
Specification	NodOn Zigbee Multifunction Relay Switch with Metering	Sonoff MINI ONE Zigbee Smart Switch
Connectivity
2.4 GHz Wi-Fi	No	No
5 GHz Wi-Fi	No	No
Bluetooth	No	Yes Catalog note BLE powers Proximity Mode, which lets the phone connect to the switch directly for basic control and settings when no Zigbee gateway is available
Radio Frequency	No	No
Thread	No	No
Z Wave	No	No
Zigbee	Zigbee Hub required	Zigbee Hub required Catalog note Zigbee 3.0 over IEEE 802.15.4, EFR32MG21
Features
Automations	Yes	Yes Catalog note Smart timer, smart scene, group control and Zigbee Binding for direct device-to-device local control without the gateway
Din Rail Mount	No Catalog note A flush-mount module; panel installation needs the optional NodOn DIN Rail Box accessory.	No Catalog note Designed for EU flush-mounted, 86-type and 120-type wall boxes, 60 mm depth recommended
Dry Contact Mode	Yes Catalog note The output is potential-free, used as a held dry contact for a boiler or water heater and as a pulsed dry contact for gates, garage doors and electric latches.	No
Energy Monitoring	Yes Manufacturer source The relay measures instantaneous power and accumulated energy. NodOn Zigbee Multifunction Relay Switch with Metering manufacturer product page → Source section SIN-4-1-21 technical data Model NodOn Zigbee Multifunction Relay Switch with Metering Region Manufacturer product page; no universal regional compatibility implied Firmware Not specified by this source Checked 2026-10-04 Check load type and installation requirements; the maximum is not a rating for every appliance. Document check only; not a hands-on test or verification of every regional or firmware variant. Catalog note Measures instantaneous power (W) and cumulative energy (Wh), which Zigbee2MQTT exposes as the power and energy properties. The measurement is not available when the module is wired as a dry contact.	No Catalog note Power metering is the separate MINI ONE PM model; this one reports no energy data and Zigbee2MQTT exposes none
Interlock Mode	No	No
On Off Button	No	Yes
Ota	Yes	Yes Catalog note Over-the-air updates through eWeLink, Zigbee2MQTT and ZHA
Power Off Memory	Yes	Yes Catalog note Power-on state is configurable as On, Off or Keep, plus a delayed power-on timer to stagger loads after an outage
Relay Channels	1	1
Wet Contact Mode	Yes Catalog note The potential applied to the input terminal passes through to the output, so it can switch a live load such as a socket or a lighting circuit.	Yes Catalog note The two parallel L Out terminals switch mains live to the load
Wireless Switch Mode	Yes Catalog note A wired switch is optional on the input terminal, and the module auto-detects a monostable or bistable switch, so an existing wall switch keeps working and can drive automations.	Yes Catalog note Detach relay mode turns the wired wall switch into a smart trigger so connected smart bulbs never lose power
Zigbee Router	Yes Catalog note Mains-powered. Every NodOn SIN micromodule acts as a Zigbee router.	Yes Catalog note SONOFF lists its Zigbee role as Router: 180 m to the gateway by default and 250 m with Turbo mode enabled
Integrations
Alexa	Partially Catalog note On/off control only. Energy consumption is not available through Alexa.	Yes Catalog note SONOFF's own feature table lists on/off, smart scene and smart timer through Alexa, using an Echo with a built-in Zigbee hub or the eWeLink skill
Apple Home	No	SONOFF Hub required Catalog note The product page states it works with Apple Home via a SONOFF Matter bridge (ZBBridge-U, iHost or eWeLink CUBE with a SONOFF Zigbee dongle). Apple Home has no Zigbee radio of its own.
Google Home	No Catalog note Not compatible with Google Home.	Yes Catalog note SONOFF lists Google Home for this model via its Matter bridges or via eWeLink cloud-to-cloud once the switch is added through a SONOFF Zigbee gateway
Home Assistant	Yes Catalog note Works with Home Assistant through ZHA and through Zigbee2MQTT.	Yes Catalog note Zigbee2MQTT supports this exact model from version 2.12.1 and exposes state, power-on behaviour, detach relay mode, turbo mode and overheat reporting. ZHA support is still pending a merge, so ZHA users need SONOFF's setup script for the full feature set.
Matter	No	SONOFF Hub required Catalog note The switch itself is Zigbee, not Matter: SONOFF republishes it into Matter through its own bridges (ZBBridge-U, iHost, eWeLink CUBE with a SONOFF Zigbee dongle).
SmartThings	Partially Catalog note Compatible with Samsung SmartThings, though support may be limited.	Yes Catalog note SONOFF's feature table lists SmartThings through the Aeotec SmartThings Hub (V3), which pairs it as a standard Zigbee device
Power
Ac Load Voltage	230 V	100-240 V Catalog note Rated 16A 100-240V~ 50/60Hz
Ac Power	Yes	Yes
Capacitive Load	Yes	Not recorded
Capacitive Maximum Load Current	Not recorded	Not recorded
Capacitive Maximum Load Power	Not recorded	Not recorded
Dc Load Voltage	Not recorded	Not applicable / unspecified
Dc Maximum Load Current	Not recorded	Not applicable / unspecified
Dc Maximum Load Power	Not recorded	Not applicable / unspecified
Dc Power	Not recorded	No
Idle Consumption	<1W	Not recorded
Inductive Load	Yes	Not recorded
Inductive Maximum Load Current	Not recorded	Not recorded
Inductive Maximum Load Power	Not recorded	Not recorded
Neutral Required	Yes	Yes Catalog note SONOFF states a neutral wire is required, and the wiring diagram uses N, L, two parallel L Out terminals and the S1 external switch input
Resistive Load	Yes	Yes
Resistive Maximum Load Current	14A Manufacturer source The stated switching current is 14 A at 230 V AC. NodOn Zigbee Multifunction Relay Switch with Metering manufacturer product page → Source section SIN-4-1-21 technical data Model NodOn Zigbee Multifunction Relay Switch with Metering Region Manufacturer product page; no universal regional compatibility implied Firmware Not specified by this source Checked 2026-10-04 Check load type and installation requirements; the maximum is not a rating for every appliance. Document check only; not a hands-on test or verification of every regional or firmware variant.	16A Catalog note 60% higher than the ZBMINIR2, which is rated 10A
Resistive Maximum Load Power	3000W Manufacturer source The stated maximum switching power is 3000 W. NodOn Zigbee Multifunction Relay Switch with Metering manufacturer product page → Source section SIN-4-1-21 technical data Model NodOn Zigbee Multifunction Relay Switch with Metering Region Manufacturer product page; no universal regional compatibility implied Firmware Not specified by this source Checked 2026-10-04 Check load type and installation requirements; the maximum is not a rating for every appliance. Document check only; not a hands-on test or verification of every regional or firmware variant.	3840W
Safety Features
Overcurrent Protection	Yes	Not recorded
Overheating Protection	Yes	Yes Catalog note Built-in high-precision temperature sensing cuts the relay output when the temperature approaches the safety threshold, and Zigbee2MQTT exposes the resulting device_overheated attribute
Overpower Protection	Yes	Not recorded
Overvoltage Protection	Yes	Not recorded

Know what’s behind the comparison.

The table matches specifications by section and field. It preserves notes, separates missing data from explicit “No” values, and keeps qualifications attached to their values. No overall winner is assigned from feature counts.

Read our comparison methodology