
Option 1 · NodOn
NodOn Zigbee Pilot Wire Heating Module
Last updated October 2026
View full device profileThe Smart Device Compare comparison
Understand the differences. Decide what matters to your home.
Build another comparison →Before you compare every specification
A summary of selected recorded differences between these relays. Check the full specification table below for details and conditions.
These observations are derived from recorded catalog data and have not all been independently verified. Confirm details with the manufacturer before purchasing.
Compare capabilities, compatibility and setup requirements.

Option 1 · NodOn
Last updated October 2026
View full device profile
Option 2 · Sonoff
Last updated October 2026
View full device profileWhat the catalog tells us
These counts describe the available data, not a quality score. More features do not automatically make a better device.
Consider your setup
Confirm which features appear in Apple Home and whether extra hardware or a subscription is needed for your intended use.
Inspect the specificationsConsider your setup
Confirm the exact device type and the features exposed in your chosen platform. Protocol support does not establish feature parity across apps.
Inspect the specificationsYour priorities, side by side
Mark the specifications you care about. Open manufacturer sources for verification scope; fields without citations remain catalog data. Expand notes for other qualifications.
Showing 46 of 46 rows. “Not recorded” does not mean “No”.
BLE powers Proximity Mode, which lets the phone connect to the switch directly for basic control and settings when no Zigbee gateway is available
Zigbee 3.0 over IEEE 802.15.4, EFR32MG21
Smart timer, smart scene, group control and Zigbee Binding for direct device-to-device local control without the gateway
A flush-mount module; panel installation needs the optional NodOn DIN Rail Box accessory.
Designed for EU flush-mounted, 86-type and 120-type wall boxes, 60 mm depth recommended
The module measures radiator consumption.
NodOn Zigbee Pilot Wire Heating Module manufacturer product page →Designed for pilot-wire electric radiators; available commands depend on the radiator.
Document check only; not a hands-on test or verification of every regional or firmware variant.
Power metering is the separate MINI ONE PM model; this one reports no energy data and Zigbee2MQTT exposes none
Over-the-air updates through eWeLink, Zigbee2MQTT and ZHA
Power-on state is configurable as On, Off or Keep, plus a delayed power-on timer to stagger loads after an outage
The two parallel L Out terminals switch mains live to the load
Confirmed by NodOn support: the module supports direct Zigbee binding with the NodOn Wall Switch (CWS-4-1-00), which then drives the four basic pilot-wire modes (Comfort, Eco, Frost Protection and Off) with no hub involved.
Detach relay mode turns the wired wall switch into a smart trigger so connected smart bulbs never lose power
Mains-powered. Every NodOn SIN micromodule acts as a Zigbee router.
SONOFF lists its Zigbee role as Router: 180 m to the gateway by default and 250 m with Turbo mode enabled
Not compatible with Amazon Alexa.
SONOFF's own feature table lists on/off, smart scene and smart timer through Alexa, using an Echo with a built-in Zigbee hub or the eWeLink skill
The product page states it works with Apple Home via a SONOFF Matter bridge (ZBBridge-U, iHost or eWeLink CUBE with a SONOFF Zigbee dongle). Apple Home has no Zigbee radio of its own.
Not compatible with Google Home.
SONOFF lists Google Home for this model via its Matter bridges or via eWeLink cloud-to-cloud once the switch is added through a SONOFF Zigbee gateway
Works with Home Assistant through ZHA and through Zigbee2MQTT.
Zigbee2MQTT supports this exact model from version 2.12.1 and exposes state, power-on behaviour, detach relay mode, turbo mode and overheat reporting. ZHA support is still pending a merge, so ZHA users need SONOFF's setup script for the full feature set.
The switch itself is Zigbee, not Matter: SONOFF republishes it into Matter through its own bridges (ZBBridge-U, iHost, eWeLink CUBE with a SONOFF Zigbee dongle).
Not compatible with Samsung SmartThings.
SONOFF's feature table lists SmartThings through the Aeotec SmartThings Hub (V3), which pairs it as a standard Zigbee device
Rated 16A 100-240V~ 50/60Hz
The documented module consumption is below 1 W.
NodOn Zigbee Pilot Wire Heating Module manufacturer product page →Designed for pilot-wire electric radiators; available commands depend on the radiator.
Document check only; not a hands-on test or verification of every regional or firmware variant.
SONOFF states a neutral wire is required, and the wiring diagram uses N, L, two parallel L Out terminals and the S1 external switch input
60% higher than the ZBMINIR2, which is rated 10A
Built-in high-precision temperature sensing cuts the relay output when the temperature approaches the safety threshold, and Zigbee2MQTT exposes the resulting device_overheated attribute
| Specification | NodOn Zigbee Pilot Wire Heating Module | Sonoff MINI ONE Zigbee Smart Switch |
|---|---|---|
| Connectivity | ||
| No | No | |
| No | No | |
| No | YesCatalog noteBLE powers Proximity Mode, which lets the phone connect to the switch directly for basic control and settings when no Zigbee gateway is available | |
| No | No | |
| No | No | |
| No | No | |
| Zigbee Hub required | Zigbee Hub requiredCatalog noteZigbee 3.0 over IEEE 802.15.4, EFR32MG21 | |
| Features | ||
| Yes | YesCatalog noteSmart timer, smart scene, group control and Zigbee Binding for direct device-to-device local control without the gateway | |
NoCatalog noteA flush-mount module; panel installation needs the optional NodOn DIN Rail Box accessory. | NoCatalog noteDesigned for EU flush-mounted, 86-type and 120-type wall boxes, 60 mm depth recommended | |
| No | No | |
YesManufacturer sourceThe module measures radiator consumption. NodOn Zigbee Pilot Wire Heating Module manufacturer product page →
Designed for pilot-wire electric radiators; available commands depend on the radiator. Document check only; not a hands-on test or verification of every regional or firmware variant. | NoCatalog notePower metering is the separate MINI ONE PM model; this one reports no energy data and Zigbee2MQTT exposes none | |
| No | No | |
| No | Yes | |
| Yes | YesCatalog noteOver-the-air updates through eWeLink, Zigbee2MQTT and ZHA | |
| Yes | YesCatalog notePower-on state is configurable as On, Off or Keep, plus a delayed power-on timer to stagger loads after an outage | |
| 1 | 1 | |
| Yes | YesCatalog noteThe two parallel L Out terminals switch mains live to the load | |
YesCatalog noteConfirmed by NodOn support: the module supports direct Zigbee binding with the NodOn Wall Switch (CWS-4-1-00), which then drives the four basic pilot-wire modes (Comfort, Eco, Frost Protection and Off) with no hub involved. | YesCatalog noteDetach relay mode turns the wired wall switch into a smart trigger so connected smart bulbs never lose power | |
YesCatalog noteMains-powered. Every NodOn SIN micromodule acts as a Zigbee router. | YesCatalog noteSONOFF lists its Zigbee role as Router: 180 m to the gateway by default and 250 m with Turbo mode enabled | |
| Integrations | ||
NoCatalog noteNot compatible with Amazon Alexa. | YesCatalog noteSONOFF's own feature table lists on/off, smart scene and smart timer through Alexa, using an Echo with a built-in Zigbee hub or the eWeLink skill | |
| No | SONOFF Hub requiredCatalog noteThe product page states it works with Apple Home via a SONOFF Matter bridge (ZBBridge-U, iHost or eWeLink CUBE with a SONOFF Zigbee dongle). Apple Home has no Zigbee radio of its own. | |
NoCatalog noteNot compatible with Google Home. | YesCatalog noteSONOFF lists Google Home for this model via its Matter bridges or via eWeLink cloud-to-cloud once the switch is added through a SONOFF Zigbee gateway | |
YesCatalog noteWorks with Home Assistant through ZHA and through Zigbee2MQTT. | YesCatalog noteZigbee2MQTT supports this exact model from version 2.12.1 and exposes state, power-on behaviour, detach relay mode, turbo mode and overheat reporting. ZHA support is still pending a merge, so ZHA users need SONOFF's setup script for the full feature set. | |
| No | SONOFF Hub requiredCatalog noteThe switch itself is Zigbee, not Matter: SONOFF republishes it into Matter through its own bridges (ZBBridge-U, iHost, eWeLink CUBE with a SONOFF Zigbee dongle). | |
NoCatalog noteNot compatible with Samsung SmartThings. | YesCatalog noteSONOFF's feature table lists SmartThings through the Aeotec SmartThings Hub (V3), which pairs it as a standard Zigbee device | |
| Power | ||
| 230 V | 100-240 VCatalog noteRated 16A 100-240V~ 50/60Hz | |
| Yes | Yes | |
| Not recorded | Not recorded | |
| Not applicable / unspecified | Not recorded | |
| Not applicable / unspecified | Not recorded | |
| Not applicable / unspecified | Not applicable / unspecified | |
| Not applicable / unspecified | Not applicable / unspecified | |
| Not applicable / unspecified | Not applicable / unspecified | |
| Not recorded | No | |
<1WManufacturer sourceThe documented module consumption is below 1 W. NodOn Zigbee Pilot Wire Heating Module manufacturer product page →
Designed for pilot-wire electric radiators; available commands depend on the radiator. Document check only; not a hands-on test or verification of every regional or firmware variant. | Not recorded | |
| Not recorded | Not recorded | |
| Not applicable / unspecified | Not recorded | |
| Not applicable / unspecified | Not recorded | |
| Yes | YesCatalog noteSONOFF states a neutral wire is required, and the wiring diagram uses N, L, two parallel L Out terminals and the S1 external switch input | |
| Yes | Yes | |
| 16A | 16ACatalog note60% higher than the ZBMINIR2, which is rated 10A | |
| 3680W | 3840W | |
| Safety Features | ||
| Yes | Not recorded | |
| Yes | YesCatalog noteBuilt-in high-precision temperature sensing cuts the relay output when the temperature approaches the safety threshold, and Zigbee2MQTT exposes the resulting device_overheated attribute | |
| Yes | Not recorded | |
| Yes | Not recorded | |
The table matches specifications by section and field. It preserves notes, separates missing data from explicit “No” values, and keeps qualifications attached to their values. No overall winner is assigned from feature counts.
Read our comparison methodology