The Smart Device Compare comparison

Shelly Dimmer 0/1-10V PM Gen4 vs Sonoff MINI ONE Zigbee Smart Switch

Understand the differences. Decide what matters to your home.

Before you compare every specification

Key differences between Shelly Dimmer 0/1-10V PM Gen4 and Sonoff MINI ONE Zigbee Smart Switch

A summary of selected recorded differences between these relays. Check the full specification table below for details and conditions.

Feature differences among your selected devices

2.4 GHz Wi-Fi (connectivity): Shelly Dimmer 0/1-10V PM Gen4 — Yes (802.11 b/g/n/ax on 2401-2483 MHz, and the device can act as a Wi-Fi range extender); Sonoff MINI ONE Zigbee Smart Switch — No.
Energy Monitoring (features): Shelly Dimmer 0/1-10V PM Gen4 — Yes (Reports voltage (110-240 V), current (50 mA-16 A) and consumption in watts); Sonoff MINI ONE Zigbee Smart Switch — No (Power metering is the separate MINI ONE PM model; this one reports no energy data and Zigbee2MQTT exposes none).
On Off Button (features): Shelly Dimmer 0/1-10V PM Gen4 — No (The single control button handles the access point, factory reset, the Zigbee profile and dimming calibration, not on/off); Sonoff MINI ONE Zigbee Smart Switch — Yes.

Specifications to check side by side

Apple Home (integrations): Shelly Dimmer 0/1-10V PM Gen4 — Yes (Via Matter); Sonoff MINI ONE Zigbee Smart Switch — SONOFF Hub required (The product page states it works with Apple Home via a SONOFF Matter bridge (ZBBridge-U, iHost or eWeLink CUBE with a SONOFF Zigbee dongle). Apple Home has no Zigbee radio of its own.).
Matter (integrations): Shelly Dimmer 0/1-10V PM Gen4 — Yes (Matter support is included out of the box, and the device is certified by the CSA); Sonoff MINI ONE Zigbee Smart Switch — SONOFF Hub required (The switch itself is Zigbee, not Matter: SONOFF republishes it into Matter through its own bridges (ZBBridge-U, iHost, eWeLink CUBE with a SONOFF Zigbee dongle).).
Ac Load Voltage (power): Shelly Dimmer 0/1-10V PM Gen4 — 110-240 V (Power supply: 110-240 V~, 50/60 Hz); Sonoff MINI ONE Zigbee Smart Switch — 100-240 V (Rated 16A 100-240V~ 50/60Hz).
Resistive Maximum Load Current (power): Shelly Dimmer 0/1-10V PM Gen4 — 13A; Sonoff MINI ONE Zigbee Smart Switch — 16A (60% higher than the ZBMINIR2, which is rated 10A).

Information still to confirm

14 of 46 comparison fields lack a resolved value for at least one selected device. Missing information is not evidence that a feature is absent.
Check the full table and manufacturer documentation before ruling out a device.

These observations are derived from recorded catalog data and have not all been independently verified. Confirm details with the manufacturer before purchasing.

Compare capabilities, compatibility and setup requirements.

Option 1 · Shelly

Shelly Dimmer 0/1-10V PM Gen4

Last updated October 2026

View full device profile

Option 2 · Sonoff

Sonoff MINI ONE Zigbee Smart Switch

Last updated October 2026

View full device profile

What the catalog tells us

Understand the tradeoffs.

These counts describe the available data, not a quality score. More features do not automatically make a better device.

7differences with recorded values for every device

14rows with missing or unspecified information

Consider your setup

Apple Home

Shelly Dimmer 0/1-10V PM Gen4Yes
Sonoff MINI ONE Zigbee Smart SwitchSONOFF Hub required

Confirm which features appear in Apple Home and whether extra hardware or a subscription is needed for your intended use.

Inspect the specifications

Consider your setup

Matter

Shelly Dimmer 0/1-10V PM Gen4Yes
Sonoff MINI ONE Zigbee Smart SwitchSONOFF Hub required

Confirm the exact device type and the features exposed in your chosen platform. Protocol support does not establish feature parity across apps.

Inspect the specifications

Your priorities, side by side

Focus on what changes.

Mark the specifications you care about. Open manufacturer sources for verification scope; fields without citations remain catalog data. Expand notes for other qualifications.

Differences onlyMy priorities (0)

Showing 46 of 46 rows. “Not recorded” does not mean “No”.

Reading layout

Connectivity

2.4 GHz Wi-Fi

Shelly Dimmer 0/1-10V PM Gen4: Yes
Catalog note
802.11 b/g/n/ax on 2401-2483 MHz, and the device can act as a Wi-Fi range extender
Sonoff MINI ONE Zigbee Smart Switch: No

5 GHz Wi-Fi

Shelly Dimmer 0/1-10V PM Gen4: No
Sonoff MINI ONE Zigbee Smart Switch: No

Bluetooth

Shelly Dimmer 0/1-10V PM Gen4

Yes

Manufacturer source

Bluetooth connectivity is specified.

Shelly Dimmer 0/1-10V PM Gen4 manufacturer product page →

Source section: Technical details: device description and main features
Model: Shelly Dimmer 0/1-10V PM Gen4
Region: US manufacturer storefront; check the exact regional hardware variant
Firmware: Not specified by this source
Checked: 2026-10-04

This is a current-sourcing controller for compatible 0–10 V or 1–10 V drivers. It is not a general-purpose phase-cut dimmer.

Document check only; not a hands-on test or verification of every regional or firmware variant.

Catalog note

Bluetooth 5.0, and the device works as a BLE gateway for other devices

Sonoff MINI ONE Zigbee Smart Switch

Yes

Catalog note

BLE powers Proximity Mode, which lets the phone connect to the switch directly for basic control and settings when no Zigbee gateway is available

Radio Frequency

Shelly Dimmer 0/1-10V PM Gen4: No
Sonoff MINI ONE Zigbee Smart Switch: No

Thread

Shelly Dimmer 0/1-10V PM Gen4: No
Sonoff MINI ONE Zigbee Smart Switch: No

Z Wave

Shelly Dimmer 0/1-10V PM Gen4: No
Sonoff MINI ONE Zigbee Smart Switch: No

Zigbee

Shelly Dimmer 0/1-10V PM Gen4: Zigbee Hub required
Catalog note
802.15.4 Zigbee, selected with five presses of the control button (Matter is the default profile), and the device repeats the Zigbee signal as a range extender
Sonoff MINI ONE Zigbee Smart Switch: Zigbee Hub required
Catalog note
Zigbee 3.0 over IEEE 802.15.4, EFR32MG21

Features

Automations

Shelly Dimmer 0/1-10V PM Gen4: Yes
Catalog note
Basic and advanced schedules, auto on/off timers, local actions, webhooks, MQTT and up to 10 scripts
Sonoff MINI ONE Zigbee Smart Switch: Yes
Catalog note
Smart timer, smart scene, group control and Zigbee Binding for direct device-to-device local control without the gateway

Din Rail Mount

Shelly Dimmer 0/1-10V PM Gen4: No
Catalog note
In-wall mounting, designed to fit behind a switch
Sonoff MINI ONE Zigbee Smart Switch: No
Catalog note
Designed for EU flush-mounted, 86-type and 120-type wall boxes, 60 mm depth recommended

Dry Contact Mode

Shelly Dimmer 0/1-10V PM Gen4: No
Catalog note
The relay output switches the mains live, so there is no potential-free contact
Sonoff MINI ONE Zigbee Smart Switch: No

Energy Monitoring

Shelly Dimmer 0/1-10V PM Gen4

Yes

Manufacturer source

Voltage, current and power measurements are available.

Shelly Dimmer 0/1-10V PM Gen4 manufacturer product page →

Source section: Technical details: device description and main features
Model: Shelly Dimmer 0/1-10V PM Gen4
Region: US manufacturer storefront; check the exact regional hardware variant
Firmware: Not specified by this source
Checked: 2026-10-04

This is a current-sourcing controller for compatible 0–10 V or 1–10 V drivers. It is not a general-purpose phase-cut dimmer.

Document check only; not a hands-on test or verification of every regional or firmware variant.

Catalog note

Reports voltage (110-240 V), current (50 mA-16 A) and consumption in watts

Sonoff MINI ONE Zigbee Smart Switch

Catalog note

Power metering is the separate MINI ONE PM model; this one reports no energy data and Zigbee2MQTT exposes none

Interlock Mode

Shelly Dimmer 0/1-10V PM Gen4: No
Sonoff MINI ONE Zigbee Smart Switch: No

On Off Button

Shelly Dimmer 0/1-10V PM Gen4: No
Catalog note
The single control button handles the access point, factory reset, the Zigbee profile and dimming calibration, not on/off
Sonoff MINI ONE Zigbee Smart Switch: Yes

Ota

Shelly Dimmer 0/1-10V PM Gen4: Yes
Sonoff MINI ONE Zigbee Smart Switch: Yes
Catalog note
Over-the-air updates through eWeLink, Zigbee2MQTT and ZHA

Power Off Memory

Shelly Dimmer 0/1-10V PM Gen4: Yes
Catalog note
The Light component sets the output state on power on, with restore_last among the options
Sonoff MINI ONE Zigbee Smart Switch: Yes
Catalog note
Power-on state is configurable as On, Off or Keep, plus a delayed power-on timer to stagger loads after an outage

Relay Channels

Shelly Dimmer 0/1-10V PM Gen4: 1
Catalog note
Single dimming channel with one Light component (light:0), a 0/1-10V control output and a relay output with power measurement
Sonoff MINI ONE Zigbee Smart Switch: 1

Wet Contact Mode

Shelly Dimmer 0/1-10V PM Gen4: Yes
Catalog note
The relay output switches the mains live feeding the driver
Sonoff MINI ONE Zigbee Smart Switch: Yes
Catalog note
The two parallel L Out terminals switch mains live to the load

Wireless Switch Mode

Shelly Dimmer 0/1-10V PM Gen4: Yes
Catalog note
The associated input can be set to detached, so the physical switch stops driving the output and only triggers automations
Sonoff MINI ONE Zigbee Smart Switch: Yes
Catalog note
Detach relay mode turns the wired wall switch into a smart trigger so connected smart bulbs never lose power

Zigbee Router

Shelly Dimmer 0/1-10V PM Gen4

Yes

Manufacturer source

The device can extend a Zigbee network.

Shelly Dimmer 0/1-10V PM Gen4 manufacturer product page →

Source section: Technical details: device description and main features
Model: Shelly Dimmer 0/1-10V PM Gen4
Region: US manufacturer storefront; check the exact regional hardware variant
Firmware: Not specified by this source
Checked: 2026-10-04

This is a current-sourcing controller for compatible 0–10 V or 1–10 V drivers. It is not a general-purpose phase-cut dimmer.

Document check only; not a hands-on test or verification of every regional or firmware variant.

Catalog note

Acts as a Zigbee repeater

Sonoff MINI ONE Zigbee Smart Switch

Yes

Catalog note

SONOFF lists its Zigbee role as Router: 180 m to the gateway by default and 250 m with Turbo mode enabled

Integrations

Alexa

Shelly Dimmer 0/1-10V PM Gen4: Yes
Sonoff MINI ONE Zigbee Smart Switch: Yes
Catalog note
SONOFF's own feature table lists on/off, smart scene and smart timer through Alexa, using an Echo with a built-in Zigbee hub or the eWeLink skill

Apple Home

Shelly Dimmer 0/1-10V PM Gen4: Yes
Catalog note
Via Matter
Sonoff MINI ONE Zigbee Smart Switch: SONOFF Hub required
Catalog note
The product page states it works with Apple Home via a SONOFF Matter bridge (ZBBridge-U, iHost or eWeLink CUBE with a SONOFF Zigbee dongle). Apple Home has no Zigbee radio of its own.

Google Home

Shelly Dimmer 0/1-10V PM Gen4: Yes
Sonoff MINI ONE Zigbee Smart Switch: Yes
Catalog note
SONOFF lists Google Home for this model via its Matter bridges or via eWeLink cloud-to-cloud once the switch is added through a SONOFF Zigbee gateway

Home Assistant

Shelly Dimmer 0/1-10V PM Gen4: Yes
Catalog note
Covered by the official Home Assistant Shelly integration, and reachable over Matter as well
Sonoff MINI ONE Zigbee Smart Switch: Yes
Catalog note
Zigbee2MQTT supports this exact model from version 2.12.1 and exposes state, power-on behaviour, detach relay mode, turbo mode and overheat reporting. ZHA support is still pending a merge, so ZHA users need SONOFF's setup script for the full feature set.

Matter

Shelly Dimmer 0/1-10V PM Gen4

Yes

Manufacturer source

Matter compatibility is documented.

Shelly Dimmer 0/1-10V PM Gen4 manufacturer product page →

Source section: Technical details: device description and main features
Model: Shelly Dimmer 0/1-10V PM Gen4
Region: US manufacturer storefront; check the exact regional hardware variant
Firmware: Not specified by this source
Checked: 2026-10-04

This is a current-sourcing controller for compatible 0–10 V or 1–10 V drivers. It is not a general-purpose phase-cut dimmer.

Document check only; not a hands-on test or verification of every regional or firmware variant.

Catalog note

Matter support is included out of the box, and the device is certified by the CSA

Sonoff MINI ONE Zigbee Smart Switch

SONOFF Hub required

Catalog note

The switch itself is Zigbee, not Matter: SONOFF republishes it into Matter through its own bridges (ZBBridge-U, iHost, eWeLink CUBE with a SONOFF Zigbee dongle).

SmartThings

Shelly Dimmer 0/1-10V PM Gen4: Yes
Catalog note
Via Matter, and through the official Shelly Cloud integration
Sonoff MINI ONE Zigbee Smart Switch: Yes
Catalog note
SONOFF's feature table lists SmartThings through the Aeotec SmartThings Hub (V3), which pairs it as a standard Zigbee device

Power

Ac Load Voltage

Shelly Dimmer 0/1-10V PM Gen4: 110-240 V
Catalog note
Power supply: 110-240 V~, 50/60 Hz
Sonoff MINI ONE Zigbee Smart Switch: 100-240 V
Catalog note
Rated 16A 100-240V~ 50/60Hz

Ac Power

Shelly Dimmer 0/1-10V PM Gen4: Yes
Sonoff MINI ONE Zigbee Smart Switch: Yes

Capacitive Load

Shelly Dimmer 0/1-10V PM Gen4: Not recorded
Sonoff MINI ONE Zigbee Smart Switch: Not recorded

Capacitive Maximum Load Current

Shelly Dimmer 0/1-10V PM Gen4: Not recorded
Sonoff MINI ONE Zigbee Smart Switch: Not recorded

Capacitive Maximum Load Power

Shelly Dimmer 0/1-10V PM Gen4: Not recorded
Sonoff MINI ONE Zigbee Smart Switch: Not recorded

Dc Load Voltage

Shelly Dimmer 0/1-10V PM Gen4: Not applicable / unspecified
Sonoff MINI ONE Zigbee Smart Switch: Not applicable / unspecified

Dc Maximum Load Current

Shelly Dimmer 0/1-10V PM Gen4: Not applicable / unspecified
Sonoff MINI ONE Zigbee Smart Switch: Not applicable / unspecified

Dc Maximum Load Power

Shelly Dimmer 0/1-10V PM Gen4: Not applicable / unspecified
Sonoff MINI ONE Zigbee Smart Switch: Not applicable / unspecified

Dc Power

Shelly Dimmer 0/1-10V PM Gen4: No
Sonoff MINI ONE Zigbee Smart Switch: No

Idle Consumption

Shelly Dimmer 0/1-10V PM Gen4: 1.5W
Sonoff MINI ONE Zigbee Smart Switch: Not recorded

Inductive Load

Shelly Dimmer 0/1-10V PM Gen4: Not recorded
Sonoff MINI ONE Zigbee Smart Switch: Not recorded

Inductive Maximum Load Current

Shelly Dimmer 0/1-10V PM Gen4: Not recorded
Sonoff MINI ONE Zigbee Smart Switch: Not recorded

Inductive Maximum Load Power

Shelly Dimmer 0/1-10V PM Gen4: Not recorded
Sonoff MINI ONE Zigbee Smart Switch: Not recorded

Neutral Required

Shelly Dimmer 0/1-10V PM Gen4: Yes
Catalog note
Powered from L and N terminals on 110-240 V AC
Sonoff MINI ONE Zigbee Smart Switch: Yes
Catalog note
SONOFF states a neutral wire is required, and the wiring diagram uses N, L, two parallel L Out terminals and the S1 external switch input

Resistive Load

Shelly Dimmer 0/1-10V PM Gen4: Yes
Catalog note
The relay output switches the mains feed to the driver, rated for up to 13 A at 240 V
Sonoff MINI ONE Zigbee Smart Switch: Yes

Resistive Maximum Load Current

Shelly Dimmer 0/1-10V PM Gen4: 13A
Sonoff MINI ONE Zigbee Smart Switch: 16A
Catalog note
60% higher than the ZBMINIR2, which is rated 10A

Resistive Maximum Load Power

Shelly Dimmer 0/1-10V PM Gen4: Not recorded
Sonoff MINI ONE Zigbee Smart Switch: 3840W

Safety Features

Overcurrent Protection

Shelly Dimmer 0/1-10V PM Gen4: Yes
Sonoff MINI ONE Zigbee Smart Switch: Not recorded

Overheating Protection

Shelly Dimmer 0/1-10V PM Gen4: Yes
Sonoff MINI ONE Zigbee Smart Switch: Yes
Catalog note
Built-in high-precision temperature sensing cuts the relay output when the temperature approaches the safety threshold, and Zigbee2MQTT exposes the resulting device_overheated attribute

Overpower Protection

Shelly Dimmer 0/1-10V PM Gen4: Yes
Sonoff MINI ONE Zigbee Smart Switch: Not recorded

Overvoltage Protection

Shelly Dimmer 0/1-10V PM Gen4: Yes
Sonoff MINI ONE Zigbee Smart Switch: Not recorded

Specifications for Shelly Dimmer 0/1-10V PM Gen4 versus Sonoff MINI ONE Zigbee Smart Switch
Specification	Shelly Dimmer 0/1-10V PM Gen4	Sonoff MINI ONE Zigbee Smart Switch
Connectivity
2.4 GHz Wi-Fi	Yes Catalog note 802.11 b/g/n/ax on 2401-2483 MHz, and the device can act as a Wi-Fi range extender	No
5 GHz Wi-Fi	No	No
Bluetooth	Yes Manufacturer source Bluetooth connectivity is specified. Shelly Dimmer 0/1-10V PM Gen4 manufacturer product page → Source section Technical details: device description and main features Model Shelly Dimmer 0/1-10V PM Gen4 Region US manufacturer storefront; check the exact regional hardware variant Firmware Not specified by this source Checked 2026-10-04 This is a current-sourcing controller for compatible 0–10 V or 1–10 V drivers. It is not a general-purpose phase-cut dimmer. Document check only; not a hands-on test or verification of every regional or firmware variant. Catalog note Bluetooth 5.0, and the device works as a BLE gateway for other devices	Yes Catalog note BLE powers Proximity Mode, which lets the phone connect to the switch directly for basic control and settings when no Zigbee gateway is available
Radio Frequency	No	No
Thread	No	No
Z Wave	No	No
Zigbee	Zigbee Hub required Catalog note 802.15.4 Zigbee, selected with five presses of the control button (Matter is the default profile), and the device repeats the Zigbee signal as a range extender	Zigbee Hub required Catalog note Zigbee 3.0 over IEEE 802.15.4, EFR32MG21
Features
Automations	Yes Catalog note Basic and advanced schedules, auto on/off timers, local actions, webhooks, MQTT and up to 10 scripts	Yes Catalog note Smart timer, smart scene, group control and Zigbee Binding for direct device-to-device local control without the gateway
Din Rail Mount	No Catalog note In-wall mounting, designed to fit behind a switch	No Catalog note Designed for EU flush-mounted, 86-type and 120-type wall boxes, 60 mm depth recommended
Dry Contact Mode	No Catalog note The relay output switches the mains live, so there is no potential-free contact	No
Energy Monitoring	Yes Manufacturer source Voltage, current and power measurements are available. Shelly Dimmer 0/1-10V PM Gen4 manufacturer product page → Source section Technical details: device description and main features Model Shelly Dimmer 0/1-10V PM Gen4 Region US manufacturer storefront; check the exact regional hardware variant Firmware Not specified by this source Checked 2026-10-04 This is a current-sourcing controller for compatible 0–10 V or 1–10 V drivers. It is not a general-purpose phase-cut dimmer. Document check only; not a hands-on test or verification of every regional or firmware variant. Catalog note Reports voltage (110-240 V), current (50 mA-16 A) and consumption in watts	No Catalog note Power metering is the separate MINI ONE PM model; this one reports no energy data and Zigbee2MQTT exposes none
Interlock Mode	No	No
On Off Button	No Catalog note The single control button handles the access point, factory reset, the Zigbee profile and dimming calibration, not on/off	Yes
Ota	Yes	Yes Catalog note Over-the-air updates through eWeLink, Zigbee2MQTT and ZHA
Power Off Memory	Yes Catalog note The Light component sets the output state on power on, with restore_last among the options	Yes Catalog note Power-on state is configurable as On, Off or Keep, plus a delayed power-on timer to stagger loads after an outage
Relay Channels	1 Catalog note Single dimming channel with one Light component (light:0), a 0/1-10V control output and a relay output with power measurement	1
Wet Contact Mode	Yes Catalog note The relay output switches the mains live feeding the driver	Yes Catalog note The two parallel L Out terminals switch mains live to the load
Wireless Switch Mode	Yes Catalog note The associated input can be set to detached, so the physical switch stops driving the output and only triggers automations	Yes Catalog note Detach relay mode turns the wired wall switch into a smart trigger so connected smart bulbs never lose power
Zigbee Router	Yes Manufacturer source The device can extend a Zigbee network. Shelly Dimmer 0/1-10V PM Gen4 manufacturer product page → Source section Technical details: device description and main features Model Shelly Dimmer 0/1-10V PM Gen4 Region US manufacturer storefront; check the exact regional hardware variant Firmware Not specified by this source Checked 2026-10-04 This is a current-sourcing controller for compatible 0–10 V or 1–10 V drivers. It is not a general-purpose phase-cut dimmer. Document check only; not a hands-on test or verification of every regional or firmware variant. Catalog note Acts as a Zigbee repeater	Yes Catalog note SONOFF lists its Zigbee role as Router: 180 m to the gateway by default and 250 m with Turbo mode enabled
Integrations
Alexa	Yes	Yes Catalog note SONOFF's own feature table lists on/off, smart scene and smart timer through Alexa, using an Echo with a built-in Zigbee hub or the eWeLink skill
Apple Home	Yes Catalog note Via Matter	SONOFF Hub required Catalog note The product page states it works with Apple Home via a SONOFF Matter bridge (ZBBridge-U, iHost or eWeLink CUBE with a SONOFF Zigbee dongle). Apple Home has no Zigbee radio of its own.
Google Home	Yes	Yes Catalog note SONOFF lists Google Home for this model via its Matter bridges or via eWeLink cloud-to-cloud once the switch is added through a SONOFF Zigbee gateway
Home Assistant	Yes Catalog note Covered by the official Home Assistant Shelly integration, and reachable over Matter as well	Yes Catalog note Zigbee2MQTT supports this exact model from version 2.12.1 and exposes state, power-on behaviour, detach relay mode, turbo mode and overheat reporting. ZHA support is still pending a merge, so ZHA users need SONOFF's setup script for the full feature set.
Matter	Yes Manufacturer source Matter compatibility is documented. Shelly Dimmer 0/1-10V PM Gen4 manufacturer product page → Source section Technical details: device description and main features Model Shelly Dimmer 0/1-10V PM Gen4 Region US manufacturer storefront; check the exact regional hardware variant Firmware Not specified by this source Checked 2026-10-04 This is a current-sourcing controller for compatible 0–10 V or 1–10 V drivers. It is not a general-purpose phase-cut dimmer. Document check only; not a hands-on test or verification of every regional or firmware variant. Catalog note Matter support is included out of the box, and the device is certified by the CSA	SONOFF Hub required Catalog note The switch itself is Zigbee, not Matter: SONOFF republishes it into Matter through its own bridges (ZBBridge-U, iHost, eWeLink CUBE with a SONOFF Zigbee dongle).
SmartThings	Yes Catalog note Via Matter, and through the official Shelly Cloud integration	Yes Catalog note SONOFF's feature table lists SmartThings through the Aeotec SmartThings Hub (V3), which pairs it as a standard Zigbee device
Power
Ac Load Voltage	110-240 V Catalog note Power supply: 110-240 V~, 50/60 Hz	100-240 V Catalog note Rated 16A 100-240V~ 50/60Hz
Ac Power	Yes	Yes
Capacitive Load	Not recorded	Not recorded
Capacitive Maximum Load Current	Not recorded	Not recorded
Capacitive Maximum Load Power	Not recorded	Not recorded
Dc Load Voltage	Not applicable / unspecified	Not applicable / unspecified
Dc Maximum Load Current	Not applicable / unspecified	Not applicable / unspecified
Dc Maximum Load Power	Not applicable / unspecified	Not applicable / unspecified
Dc Power	No	No
Idle Consumption	1.5W	Not recorded
Inductive Load	Not recorded	Not recorded
Inductive Maximum Load Current	Not recorded	Not recorded
Inductive Maximum Load Power	Not recorded	Not recorded
Neutral Required	Yes Catalog note Powered from L and N terminals on 110-240 V AC	Yes Catalog note SONOFF states a neutral wire is required, and the wiring diagram uses N, L, two parallel L Out terminals and the S1 external switch input
Resistive Load	Yes Catalog note The relay output switches the mains feed to the driver, rated for up to 13 A at 240 V	Yes
Resistive Maximum Load Current	13A	16A Catalog note 60% higher than the ZBMINIR2, which is rated 10A
Resistive Maximum Load Power	Not recorded	3840W
Safety Features
Overcurrent Protection	Yes	Not recorded
Overheating Protection	Yes	Yes Catalog note Built-in high-precision temperature sensing cuts the relay output when the temperature approaches the safety threshold, and Zigbee2MQTT exposes the resulting device_overheated attribute
Overpower Protection	Yes	Not recorded
Overvoltage Protection	Yes	Not recorded

Know what’s behind the comparison.

The table matches specifications by section and field. It preserves notes, separates missing data from explicit “No” values, and keeps qualifications attached to their values. No overall winner is assigned from feature counts.

Read our comparison methodology