The Smart Device Compare comparison

Shelly Dimmer 0/1-10V PM Gen4 vs Sonoff ZBMINIR2 Extreme Zigbee Smart Switch

Understand the differences. Decide what matters to your home.

Before you compare every specification

Key differences between Shelly Dimmer 0/1-10V PM Gen4 and Sonoff ZBMINIR2 Extreme Zigbee Smart Switch

A summary of selected recorded differences between these relays. Check the full specification table below for details and conditions.

Feature differences among your selected devices

2.4 GHz Wi-Fi (connectivity): Shelly Dimmer 0/1-10V PM Gen4 — Yes (802.11 b/g/n/ax on 2401-2483 MHz, and the device can act as a Wi-Fi range extender); Sonoff ZBMINIR2 Extreme Zigbee Smart Switch — No.
Bluetooth (connectivity): Shelly Dimmer 0/1-10V PM Gen4 — Yes (Bluetooth 5.0, and the device works as a BLE gateway for other devices); Sonoff ZBMINIR2 Extreme Zigbee Smart Switch — No.
Energy Monitoring (features): Shelly Dimmer 0/1-10V PM Gen4 — Yes (Reports voltage (110-240 V), current (50 mA-16 A) and consumption in watts); Sonoff ZBMINIR2 Extreme Zigbee Smart Switch — No.
On Off Button (features): Shelly Dimmer 0/1-10V PM Gen4 — No (The single control button handles the access point, factory reset, the Zigbee profile and dimming calibration, not on/off); Sonoff ZBMINIR2 Extreme Zigbee Smart Switch — Yes.

Specifications to check side by side

Apple Home (integrations): Shelly Dimmer 0/1-10V PM Gen4 — Yes (Via Matter); Sonoff ZBMINIR2 Extreme Zigbee Smart Switch — SONOFF Hub required (SONOFF lists this model among the Zigbee devices its Matter bridges (Zigbee Bridge Ultra, iHost, NSPanel Pro) publish to Matter, which is how it reaches the Apple Home app. Apple Home has no Zigbee radio of its own.).
Matter (integrations): Shelly Dimmer 0/1-10V PM Gen4 — Yes (Matter support is included out of the box, and the device is certified by the CSA); Sonoff ZBMINIR2 Extreme Zigbee Smart Switch — SONOFF Hub required (The device is not Matter itself: SONOFF lists it among the Zigbee models its Matter bridges (Zigbee Bridge Ultra, iHost, NSPanel Pro) republish into Matter.).
Ac Load Voltage (power): Shelly Dimmer 0/1-10V PM Gen4 — 110-240 V (Power supply: 110-240 V~, 50/60 Hz); Sonoff ZBMINIR2 Extreme Zigbee Smart Switch — 100-240 V.
Resistive Maximum Load Current (power): Shelly Dimmer 0/1-10V PM Gen4 — 13A; Sonoff ZBMINIR2 Extreme Zigbee Smart Switch — 10A.

Information still to confirm

15 of 46 comparison fields lack a resolved value for at least one selected device. Missing information is not evidence that a feature is absent.
Check the full table and manufacturer documentation before ruling out a device.

These observations are derived from recorded catalog data and have not all been independently verified. Confirm details with the manufacturer before purchasing.

Compare capabilities, compatibility and setup requirements.

Option 1 · Shelly

Shelly Dimmer 0/1-10V PM Gen4

Last updated October 2026

View full device profile

Option 2 · Sonoff

Sonoff ZBMINIR2 Extreme Zigbee Smart Switch

Last updated October 2026

View full device profile

What the catalog tells us

Understand the tradeoffs.

These counts describe the available data, not a quality score. More features do not automatically make a better device.

9differences with recorded values for every device

15rows with missing or unspecified information

Consider your setup

Apple Home

Shelly Dimmer 0/1-10V PM Gen4Yes
Sonoff ZBMINIR2 Extreme Zigbee Smart SwitchSONOFF Hub required

Confirm which features appear in Apple Home and whether extra hardware or a subscription is needed for your intended use.

Inspect the specifications

Consider your setup

Matter

Shelly Dimmer 0/1-10V PM Gen4Yes
Sonoff ZBMINIR2 Extreme Zigbee Smart SwitchSONOFF Hub required

Confirm the exact device type and the features exposed in your chosen platform. Protocol support does not establish feature parity across apps.

Inspect the specifications

Your priorities, side by side

Focus on what changes.

Mark the specifications you care about. Open manufacturer sources for verification scope; fields without citations remain catalog data. Expand notes for other qualifications.

Differences onlyMy priorities (0)

Showing 46 of 46 rows. “Not recorded” does not mean “No”.

Reading layout

Connectivity

2.4 GHz Wi-Fi

Shelly Dimmer 0/1-10V PM Gen4: Yes
Catalog note
802.11 b/g/n/ax on 2401-2483 MHz, and the device can act as a Wi-Fi range extender
Sonoff ZBMINIR2 Extreme Zigbee Smart Switch: No

5 GHz Wi-Fi

Shelly Dimmer 0/1-10V PM Gen4: No
Sonoff ZBMINIR2 Extreme Zigbee Smart Switch: No

Bluetooth

Shelly Dimmer 0/1-10V PM Gen4

Yes

Manufacturer source

Bluetooth connectivity is specified.

Shelly Dimmer 0/1-10V PM Gen4 manufacturer product page →

Source section: Technical details: device description and main features
Model: Shelly Dimmer 0/1-10V PM Gen4
Region: US manufacturer storefront; check the exact regional hardware variant
Firmware: Not specified by this source
Checked: 2026-10-04

This is a current-sourcing controller for compatible 0–10 V or 1–10 V drivers. It is not a general-purpose phase-cut dimmer.

Document check only; not a hands-on test or verification of every regional or firmware variant.

Catalog note

Bluetooth 5.0, and the device works as a BLE gateway for other devices

Sonoff ZBMINIR2 Extreme Zigbee Smart Switch

Radio Frequency

Shelly Dimmer 0/1-10V PM Gen4: No
Sonoff ZBMINIR2 Extreme Zigbee Smart Switch: No

Thread

Shelly Dimmer 0/1-10V PM Gen4: No
Sonoff ZBMINIR2 Extreme Zigbee Smart Switch: No

Z Wave

Shelly Dimmer 0/1-10V PM Gen4: No
Sonoff ZBMINIR2 Extreme Zigbee Smart Switch: No

Zigbee

Shelly Dimmer 0/1-10V PM Gen4: Zigbee Hub required
Catalog note
802.15.4 Zigbee, selected with five presses of the control button (Matter is the default profile), and the device repeats the Zigbee signal as a range extender
Sonoff ZBMINIR2 Extreme Zigbee Smart Switch: Zigbee Hub required

Features

Automations

Shelly Dimmer 0/1-10V PM Gen4: Yes
Catalog note
Basic and advanced schedules, auto on/off timers, local actions, webhooks, MQTT and up to 10 scripts
Sonoff ZBMINIR2 Extreme Zigbee Smart Switch: Yes

Din Rail Mount

Shelly Dimmer 0/1-10V PM Gen4: No
Catalog note
In-wall mounting, designed to fit behind a switch
Sonoff ZBMINIR2 Extreme Zigbee Smart Switch: No

Dry Contact Mode

Shelly Dimmer 0/1-10V PM Gen4: No
Catalog note
The relay output switches the mains live, so there is no potential-free contact
Sonoff ZBMINIR2 Extreme Zigbee Smart Switch: No

Energy Monitoring

Shelly Dimmer 0/1-10V PM Gen4

Yes

Manufacturer source

Voltage, current and power measurements are available.

Shelly Dimmer 0/1-10V PM Gen4 manufacturer product page →

Source section: Technical details: device description and main features
Model: Shelly Dimmer 0/1-10V PM Gen4
Region: US manufacturer storefront; check the exact regional hardware variant
Firmware: Not specified by this source
Checked: 2026-10-04

This is a current-sourcing controller for compatible 0–10 V or 1–10 V drivers. It is not a general-purpose phase-cut dimmer.

Document check only; not a hands-on test or verification of every regional or firmware variant.

Catalog note

Reports voltage (110-240 V), current (50 mA-16 A) and consumption in watts

Sonoff ZBMINIR2 Extreme Zigbee Smart Switch

Interlock Mode

Shelly Dimmer 0/1-10V PM Gen4: No
Sonoff ZBMINIR2 Extreme Zigbee Smart Switch: No

On Off Button

Shelly Dimmer 0/1-10V PM Gen4: No
Catalog note
The single control button handles the access point, factory reset, the Zigbee profile and dimming calibration, not on/off
Sonoff ZBMINIR2 Extreme Zigbee Smart Switch: Yes

Ota

Shelly Dimmer 0/1-10V PM Gen4: Yes
Sonoff ZBMINIR2 Extreme Zigbee Smart Switch: Yes

Power Off Memory

Shelly Dimmer 0/1-10V PM Gen4: Yes
Catalog note
The Light component sets the output state on power on, with restore_last among the options
Sonoff ZBMINIR2 Extreme Zigbee Smart Switch: Yes

Relay Channels

Shelly Dimmer 0/1-10V PM Gen4: 1
Catalog note
Single dimming channel with one Light component (light:0), a 0/1-10V control output and a relay output with power measurement
Sonoff ZBMINIR2 Extreme Zigbee Smart Switch: 1

Wet Contact Mode

Shelly Dimmer 0/1-10V PM Gen4: Yes
Catalog note
The relay output switches the mains live feeding the driver
Sonoff ZBMINIR2 Extreme Zigbee Smart Switch: Yes

Wireless Switch Mode

Shelly Dimmer 0/1-10V PM Gen4: Yes
Catalog note
The associated input can be set to detached, so the physical switch stops driving the output and only triggers automations
Sonoff ZBMINIR2 Extreme Zigbee Smart Switch: No

Zigbee Router

Shelly Dimmer 0/1-10V PM Gen4

Yes

Manufacturer source

The device can extend a Zigbee network.

Shelly Dimmer 0/1-10V PM Gen4 manufacturer product page →

Source section: Technical details: device description and main features
Model: Shelly Dimmer 0/1-10V PM Gen4
Region: US manufacturer storefront; check the exact regional hardware variant
Firmware: Not specified by this source
Checked: 2026-10-04

This is a current-sourcing controller for compatible 0–10 V or 1–10 V drivers. It is not a general-purpose phase-cut dimmer.

Document check only; not a hands-on test or verification of every regional or firmware variant.

Catalog note

Acts as a Zigbee repeater

Sonoff ZBMINIR2 Extreme Zigbee Smart Switch

Yes

Catalog note

A reliable connection is crucial for your Zigbee network. ZBMINIR2, as a Zigbee router device with Turbo Mode, boosts signal strength and expands coverage for optimal performance.

Integrations

Alexa

Shelly Dimmer 0/1-10V PM Gen4: Yes
Sonoff ZBMINIR2 Extreme Zigbee Smart Switch: Yes

Apple Home

Shelly Dimmer 0/1-10V PM Gen4: Yes
Catalog note
Via Matter
Sonoff ZBMINIR2 Extreme Zigbee Smart Switch: SONOFF Hub required
Catalog note
SONOFF lists this model among the Zigbee devices its Matter bridges (Zigbee Bridge Ultra, iHost, NSPanel Pro) publish to Matter, which is how it reaches the Apple Home app. Apple Home has no Zigbee radio of its own.

Google Home

Shelly Dimmer 0/1-10V PM Gen4: Yes
Sonoff ZBMINIR2 Extreme Zigbee Smart Switch: Yes

Home Assistant

Shelly Dimmer 0/1-10V PM Gen4: Yes
Catalog note
Covered by the official Home Assistant Shelly integration, and reachable over Matter as well
Sonoff ZBMINIR2 Extreme Zigbee Smart Switch: Yes

Matter

Shelly Dimmer 0/1-10V PM Gen4

Yes

Manufacturer source

Matter compatibility is documented.

Shelly Dimmer 0/1-10V PM Gen4 manufacturer product page →

Source section: Technical details: device description and main features
Model: Shelly Dimmer 0/1-10V PM Gen4
Region: US manufacturer storefront; check the exact regional hardware variant
Firmware: Not specified by this source
Checked: 2026-10-04

This is a current-sourcing controller for compatible 0–10 V or 1–10 V drivers. It is not a general-purpose phase-cut dimmer.

Document check only; not a hands-on test or verification of every regional or firmware variant.

Catalog note

Matter support is included out of the box, and the device is certified by the CSA

Sonoff ZBMINIR2 Extreme Zigbee Smart Switch

SONOFF Hub required

Catalog note

The device is not Matter itself: SONOFF lists it among the Zigbee models its Matter bridges (Zigbee Bridge Ultra, iHost, NSPanel Pro) republish into Matter.

SmartThings

Shelly Dimmer 0/1-10V PM Gen4: Yes
Catalog note
Via Matter, and through the official Shelly Cloud integration
Sonoff ZBMINIR2 Extreme Zigbee Smart Switch: Yes

Power

Ac Load Voltage

Shelly Dimmer 0/1-10V PM Gen4: 110-240 V
Catalog note
Power supply: 110-240 V~, 50/60 Hz
Sonoff ZBMINIR2 Extreme Zigbee Smart Switch: 100-240 V

Ac Power

Shelly Dimmer 0/1-10V PM Gen4: Yes
Sonoff ZBMINIR2 Extreme Zigbee Smart Switch: Yes

Capacitive Load

Shelly Dimmer 0/1-10V PM Gen4: Not recorded
Sonoff ZBMINIR2 Extreme Zigbee Smart Switch: No

Capacitive Maximum Load Current

Shelly Dimmer 0/1-10V PM Gen4: Not recorded
Sonoff ZBMINIR2 Extreme Zigbee Smart Switch: Not applicable / unspecified

Capacitive Maximum Load Power

Shelly Dimmer 0/1-10V PM Gen4: Not recorded
Sonoff ZBMINIR2 Extreme Zigbee Smart Switch: Not applicable / unspecified

Dc Load Voltage

Shelly Dimmer 0/1-10V PM Gen4: Not applicable / unspecified
Sonoff ZBMINIR2 Extreme Zigbee Smart Switch: Not applicable / unspecified

Dc Maximum Load Current

Shelly Dimmer 0/1-10V PM Gen4: Not applicable / unspecified
Sonoff ZBMINIR2 Extreme Zigbee Smart Switch: Not applicable / unspecified

Dc Maximum Load Power

Shelly Dimmer 0/1-10V PM Gen4: Not applicable / unspecified
Sonoff ZBMINIR2 Extreme Zigbee Smart Switch: Not applicable / unspecified

Dc Power

Shelly Dimmer 0/1-10V PM Gen4: No
Sonoff ZBMINIR2 Extreme Zigbee Smart Switch: No

Idle Consumption

Shelly Dimmer 0/1-10V PM Gen4: 1.5W
Sonoff ZBMINIR2 Extreme Zigbee Smart Switch: Not recorded

Inductive Load

Shelly Dimmer 0/1-10V PM Gen4: Not recorded
Sonoff ZBMINIR2 Extreme Zigbee Smart Switch: No

Inductive Maximum Load Current

Shelly Dimmer 0/1-10V PM Gen4: Not recorded
Sonoff ZBMINIR2 Extreme Zigbee Smart Switch: Not applicable / unspecified

Inductive Maximum Load Power

Shelly Dimmer 0/1-10V PM Gen4: Not recorded
Sonoff ZBMINIR2 Extreme Zigbee Smart Switch: Not applicable / unspecified

Neutral Required

Shelly Dimmer 0/1-10V PM Gen4: Yes
Catalog note
Powered from L and N terminals on 110-240 V AC
Sonoff ZBMINIR2 Extreme Zigbee Smart Switch: Yes

Resistive Load

Shelly Dimmer 0/1-10V PM Gen4: Yes
Catalog note
The relay output switches the mains feed to the driver, rated for up to 13 A at 240 V
Sonoff ZBMINIR2 Extreme Zigbee Smart Switch: Yes

Resistive Maximum Load Current

Shelly Dimmer 0/1-10V PM Gen4: 13A
Sonoff ZBMINIR2 Extreme Zigbee Smart Switch: 10A

Resistive Maximum Load Power

Shelly Dimmer 0/1-10V PM Gen4: Not recorded
Sonoff ZBMINIR2 Extreme Zigbee Smart Switch: 2400W

Safety Features

Overcurrent Protection

Shelly Dimmer 0/1-10V PM Gen4: Yes
Sonoff ZBMINIR2 Extreme Zigbee Smart Switch: Not recorded

Overheating Protection

Shelly Dimmer 0/1-10V PM Gen4: Yes
Sonoff ZBMINIR2 Extreme Zigbee Smart Switch: Not recorded

Overpower Protection

Shelly Dimmer 0/1-10V PM Gen4: Yes
Sonoff ZBMINIR2 Extreme Zigbee Smart Switch: Not recorded

Overvoltage Protection

Shelly Dimmer 0/1-10V PM Gen4: Yes
Sonoff ZBMINIR2 Extreme Zigbee Smart Switch: Not recorded

Specifications for Shelly Dimmer 0/1-10V PM Gen4 versus Sonoff ZBMINIR2 Extreme Zigbee Smart Switch
Specification	Shelly Dimmer 0/1-10V PM Gen4	Sonoff ZBMINIR2 Extreme Zigbee Smart Switch
Connectivity
2.4 GHz Wi-Fi	Yes Catalog note 802.11 b/g/n/ax on 2401-2483 MHz, and the device can act as a Wi-Fi range extender	No
5 GHz Wi-Fi	No	No
Bluetooth	Yes Manufacturer source Bluetooth connectivity is specified. Shelly Dimmer 0/1-10V PM Gen4 manufacturer product page → Source section Technical details: device description and main features Model Shelly Dimmer 0/1-10V PM Gen4 Region US manufacturer storefront; check the exact regional hardware variant Firmware Not specified by this source Checked 2026-10-04 This is a current-sourcing controller for compatible 0–10 V or 1–10 V drivers. It is not a general-purpose phase-cut dimmer. Document check only; not a hands-on test or verification of every regional or firmware variant. Catalog note Bluetooth 5.0, and the device works as a BLE gateway for other devices	No
Radio Frequency	No	No
Thread	No	No
Z Wave	No	No
Zigbee	Zigbee Hub required Catalog note 802.15.4 Zigbee, selected with five presses of the control button (Matter is the default profile), and the device repeats the Zigbee signal as a range extender	Zigbee Hub required
Features
Automations	Yes Catalog note Basic and advanced schedules, auto on/off timers, local actions, webhooks, MQTT and up to 10 scripts	Yes
Din Rail Mount	No Catalog note In-wall mounting, designed to fit behind a switch	No
Dry Contact Mode	No Catalog note The relay output switches the mains live, so there is no potential-free contact	No
Energy Monitoring	Yes Manufacturer source Voltage, current and power measurements are available. Shelly Dimmer 0/1-10V PM Gen4 manufacturer product page → Source section Technical details: device description and main features Model Shelly Dimmer 0/1-10V PM Gen4 Region US manufacturer storefront; check the exact regional hardware variant Firmware Not specified by this source Checked 2026-10-04 This is a current-sourcing controller for compatible 0–10 V or 1–10 V drivers. It is not a general-purpose phase-cut dimmer. Document check only; not a hands-on test or verification of every regional or firmware variant. Catalog note Reports voltage (110-240 V), current (50 mA-16 A) and consumption in watts	No
Interlock Mode	No	No
On Off Button	No Catalog note The single control button handles the access point, factory reset, the Zigbee profile and dimming calibration, not on/off	Yes
Ota	Yes	Yes
Power Off Memory	Yes Catalog note The Light component sets the output state on power on, with restore_last among the options	Yes
Relay Channels	1 Catalog note Single dimming channel with one Light component (light:0), a 0/1-10V control output and a relay output with power measurement	1
Wet Contact Mode	Yes Catalog note The relay output switches the mains live feeding the driver	Yes
Wireless Switch Mode	Yes Catalog note The associated input can be set to detached, so the physical switch stops driving the output and only triggers automations	No
Zigbee Router	Yes Manufacturer source The device can extend a Zigbee network. Shelly Dimmer 0/1-10V PM Gen4 manufacturer product page → Source section Technical details: device description and main features Model Shelly Dimmer 0/1-10V PM Gen4 Region US manufacturer storefront; check the exact regional hardware variant Firmware Not specified by this source Checked 2026-10-04 This is a current-sourcing controller for compatible 0–10 V or 1–10 V drivers. It is not a general-purpose phase-cut dimmer. Document check only; not a hands-on test or verification of every regional or firmware variant. Catalog note Acts as a Zigbee repeater	Yes Catalog note A reliable connection is crucial for your Zigbee network. ZBMINIR2, as a Zigbee router device with Turbo Mode, boosts signal strength and expands coverage for optimal performance.
Integrations
Alexa	Yes	Yes
Apple Home	Yes Catalog note Via Matter	SONOFF Hub required Catalog note SONOFF lists this model among the Zigbee devices its Matter bridges (Zigbee Bridge Ultra, iHost, NSPanel Pro) publish to Matter, which is how it reaches the Apple Home app. Apple Home has no Zigbee radio of its own.
Google Home	Yes	Yes
Home Assistant	Yes Catalog note Covered by the official Home Assistant Shelly integration, and reachable over Matter as well	Yes
Matter	Yes Manufacturer source Matter compatibility is documented. Shelly Dimmer 0/1-10V PM Gen4 manufacturer product page → Source section Technical details: device description and main features Model Shelly Dimmer 0/1-10V PM Gen4 Region US manufacturer storefront; check the exact regional hardware variant Firmware Not specified by this source Checked 2026-10-04 This is a current-sourcing controller for compatible 0–10 V or 1–10 V drivers. It is not a general-purpose phase-cut dimmer. Document check only; not a hands-on test or verification of every regional or firmware variant. Catalog note Matter support is included out of the box, and the device is certified by the CSA	SONOFF Hub required Catalog note The device is not Matter itself: SONOFF lists it among the Zigbee models its Matter bridges (Zigbee Bridge Ultra, iHost, NSPanel Pro) republish into Matter.
SmartThings	Yes Catalog note Via Matter, and through the official Shelly Cloud integration	Yes
Power
Ac Load Voltage	110-240 V Catalog note Power supply: 110-240 V~, 50/60 Hz	100-240 V
Ac Power	Yes	Yes
Capacitive Load	Not recorded	No
Capacitive Maximum Load Current	Not recorded	Not applicable / unspecified
Capacitive Maximum Load Power	Not recorded	Not applicable / unspecified
Dc Load Voltage	Not applicable / unspecified	Not applicable / unspecified
Dc Maximum Load Current	Not applicable / unspecified	Not applicable / unspecified
Dc Maximum Load Power	Not applicable / unspecified	Not applicable / unspecified
Dc Power	No	No
Idle Consumption	1.5W	Not recorded
Inductive Load	Not recorded	No
Inductive Maximum Load Current	Not recorded	Not applicable / unspecified
Inductive Maximum Load Power	Not recorded	Not applicable / unspecified
Neutral Required	Yes Catalog note Powered from L and N terminals on 110-240 V AC	Yes
Resistive Load	Yes Catalog note The relay output switches the mains feed to the driver, rated for up to 13 A at 240 V	Yes
Resistive Maximum Load Current	13A	10A
Resistive Maximum Load Power	Not recorded	2400W
Safety Features
Overcurrent Protection	Yes	Not recorded
Overheating Protection	Yes	Not recorded
Overpower Protection	Yes	Not recorded
Overvoltage Protection	Yes	Not recorded

Know what’s behind the comparison.

The table matches specifications by section and field. It preserves notes, separates missing data from explicit “No” values, and keeps qualifications attached to their values. No overall winner is assigned from feature counts.

Read our comparison methodology