Sonoff Basic DIN Rail Zigbee Smart Switch vs Sonoff MINI ONE Zigbee Smart Switch

Zigbee 3.0 over IEEE 802.15.4, TLSR8656 chip, per the specification table and Zigbee2MQTT

Zigbee 3.0 over IEEE 802.15.4, EFR32MG21

Smart timer schedules, loop timers, inching and smart scenes in eWeLink

Smart timer, smart scene, group control and Zigbee Binding for direct device-to-device local control without the gateway

The double-pole output switches the live and neutral conductors, so the contact is not potential-free

A physical button controls on/off and enters pairing mode on a long press

Zigbee2MQTT lists this device as supporting OTA updates

Over-the-air updates through eWeLink, Zigbee2MQTT and ZHA

Power-On State is a documented setting: ON, Off or Last state after an outage

Power-on state is configurable as On, Off or Keep, plus a delayed power-on timer to stagger loads after an outage

The output terminals carry the switched live and neutral wires to the load

The two parallel L Out terminals switch mains live to the load

No external switch terminal: the single circuit is switched from the app, Zigbee or an automation

Detach relay mode turns the wired wall switch into a smart trigger so connected smart bulbs never lose power

The product page states it also functions as a Zigbee router to extend network coverage

SONOFF lists its Zigbee role as Router: 180 m to the gateway by default and 250 m with Turbo mode enabled

The SONOFF knowledge center lists Alexa voice control (open/close) through eWeLink account linking

SONOFF's own feature table lists on/off, smart scene and smart timer through Alexa, using an Echo with a built-in Zigbee hub or the eWeLink skill

The product page states it works with Apple Home via a SONOFF Matter bridge (ZBBridge-U, iHost or eWeLink CUBE). Apple Home has no Zigbee radio of its own.

The product page states it works with Apple Home via a SONOFF Matter bridge (ZBBridge-U, iHost or eWeLink CUBE with a SONOFF Zigbee dongle). Apple Home has no Zigbee radio of its own.

The SONOFF knowledge center lists Google Home voice control (open/close) after the device is added to the eWeLink app and the account is linked

SONOFF lists Google Home for this model via its Matter bridges or via eWeLink cloud-to-cloud once the switch is added through a SONOFF Zigbee gateway

Zigbee2MQTT supports this exact model and exposes state, power-on behaviour, inching, voltage, current, power and energy totals, plus the overload thresholds

Zigbee2MQTT supports this exact model from version 2.12.1 and exposes state, power-on behaviour, detach relay mode, turbo mode and overheat reporting. ZHA support is still pending a merge, so ZHA users need SONOFF's setup script for the full feature set.

The switch itself is Zigbee, not Matter: SONOFF republishes it into Matter through its own bridges (ZBBridge-U, iHost, eWeLink CUBE with a SONOFF Zigbee dongle).

The switch itself is Zigbee, not Matter: SONOFF republishes it into Matter through its own bridges (ZBBridge-U, iHost, eWeLink CUBE with a SONOFF Zigbee dongle).

The SONOFF knowledge center lists SmartThings voice control (open/close), and the compatibility table pairs it through the Aeotec Smart Home Hub V3 as a standard Zigbee device

SONOFF's feature table lists SmartThings through the Aeotec SmartThings Hub (V3), which pairs it as a standard Zigbee device

Rated 100-240V~ 50/60Hz 32A Max, single-phase only per the specification table

Mains AC only: the specification table limits it to single-phase 100-240V use

It wires L and N in and out (double-pole switching), so a neutral conductor is required

SONOFF states a neutral wire is required, and the wiring diagram uses N, L, two parallel L Out terminals and the S1 external switch input

The specification table rates the relay 32A Max with a maximum load of 7680W