The Smart Device Compare comparison

Sonoff MINI ONE PM Matter Over WiFi Smart Switch vs Sonoff MINI ONE Zigbee Smart Switch

Understand the differences. Decide what matters to your home.

Before you compare every specification

Key differences between Sonoff MINI ONE PM Matter Over WiFi Smart Switch and Sonoff MINI ONE Zigbee Smart Switch

A summary of selected recorded differences between these relays. Check the full specification table below for details and conditions.

Feature differences among your selected devices

2.4 GHz Wi-Fi (connectivity): Sonoff MINI ONE PM Matter Over WiFi Smart Switch — Yes (IEEE 802.11 b/g/n 2.4GHz); Sonoff MINI ONE Zigbee Smart Switch — No.
Energy Monitoring (features): Sonoff MINI ONE PM Matter Over WiFi Smart Switch — Yes (Bidirectional metering, so it reads solar generation as well as consumption, with a year of local data storage); Sonoff MINI ONE Zigbee Smart Switch — No (Power metering is the separate MINI ONE PM model; this one reports no energy data and Zigbee2MQTT exposes none).
Zigbee Router (features): Sonoff MINI ONE PM Matter Over WiFi Smart Switch — No; Sonoff MINI ONE Zigbee Smart Switch — Yes (SONOFF lists its Zigbee role as Router: 180 m to the gateway by default and 250 m with Turbo mode enabled).

Specifications to check side by side

Bluetooth (connectivity): Sonoff MINI ONE PM Matter Over WiFi Smart Switch — For Pairing (The manual's EU declaration of conformity lists BLE 2402-2480 MHz for this model, the transport Matter uses to commission a Wi-Fi device); Sonoff MINI ONE Zigbee Smart Switch — Yes (BLE powers Proximity Mode, which lets the phone connect to the switch directly for basic control and settings when no Zigbee gateway is available).
Zigbee (connectivity): Sonoff MINI ONE PM Matter Over WiFi Smart Switch — No; Sonoff MINI ONE Zigbee Smart Switch — Zigbee Hub required (Zigbee 3.0 over IEEE 802.15.4, EFR32MG21).
Apple Home (integrations): Sonoff MINI ONE PM Matter Over WiFi Smart Switch — Yes (Via Matter); Sonoff MINI ONE Zigbee Smart Switch — SONOFF Hub required (The product page states it works with Apple Home via a SONOFF Matter bridge (ZBBridge-U, iHost or eWeLink CUBE with a SONOFF Zigbee dongle). Apple Home has no Zigbee radio of its own.).
Matter (integrations): Sonoff MINI ONE PM Matter Over WiFi Smart Switch — Yes (Matter over Wi-Fi, the protocol the product is named for); Sonoff MINI ONE Zigbee Smart Switch — SONOFF Hub required (The switch itself is Zigbee, not Matter: SONOFF republishes it into Matter through its own bridges (ZBBridge-U, iHost, eWeLink CUBE with a SONOFF Zigbee dongle).).

Information still to confirm

14 of 46 comparison fields lack a resolved value for at least one selected device. Missing information is not evidence that a feature is absent.
Check the full table and manufacturer documentation before ruling out a device.

These observations are derived from recorded catalog data and have not all been independently verified. Confirm details with the manufacturer before purchasing.

Compare capabilities, compatibility and setup requirements.

Option 1 · Sonoff

Sonoff MINI ONE PM Matter Over WiFi Smart Switch

Last updated October 2026

View full device profile

Option 2 · Sonoff

Sonoff MINI ONE Zigbee Smart Switch

Last updated October 2026

View full device profile

What the catalog tells us

Understand the tradeoffs.

These counts describe the available data, not a quality score. More features do not automatically make a better device.

8differences with recorded values for every device

14rows with missing or unspecified information

Consider your setup

Apple Home

Sonoff MINI ONE PM Matter Over WiFi Smart SwitchYes
Sonoff MINI ONE Zigbee Smart SwitchSONOFF Hub required

Confirm which features appear in Apple Home and whether extra hardware or a subscription is needed for your intended use.

Inspect the specifications

Consider your setup

Matter

Sonoff MINI ONE PM Matter Over WiFi Smart SwitchYes
Sonoff MINI ONE Zigbee Smart SwitchSONOFF Hub required

Confirm the exact device type and the features exposed in your chosen platform. Protocol support does not establish feature parity across apps.

Inspect the specifications

Your priorities, side by side

Focus on what changes.

Mark the specifications you care about. Open manufacturer sources for verification scope; fields without citations remain catalog data. Expand notes for other qualifications.

Differences onlyMy priorities (0)

Showing 46 of 46 rows. “Not recorded” does not mean “No”.

Reading layout

Connectivity

2.4 GHz Wi-Fi

Sonoff MINI ONE PM Matter Over WiFi Smart Switch: Yes
Catalog note
IEEE 802.11 b/g/n 2.4GHz
Sonoff MINI ONE Zigbee Smart Switch: No

5 GHz Wi-Fi

Sonoff MINI ONE PM Matter Over WiFi Smart Switch: No
Sonoff MINI ONE Zigbee Smart Switch: No

Bluetooth

Sonoff MINI ONE PM Matter Over WiFi Smart Switch: For Pairing
Catalog note
The manual's EU declaration of conformity lists BLE 2402-2480 MHz for this model, the transport Matter uses to commission a Wi-Fi device
Sonoff MINI ONE Zigbee Smart Switch: Yes
Catalog note
BLE powers Proximity Mode, which lets the phone connect to the switch directly for basic control and settings when no Zigbee gateway is available

Radio Frequency

Sonoff MINI ONE PM Matter Over WiFi Smart Switch: No
Sonoff MINI ONE Zigbee Smart Switch: No

Thread

Sonoff MINI ONE PM Matter Over WiFi Smart Switch: No
Sonoff MINI ONE Zigbee Smart Switch: No

Z Wave

Sonoff MINI ONE PM Matter Over WiFi Smart Switch: No
Sonoff MINI ONE Zigbee Smart Switch: No

Zigbee

Sonoff MINI ONE PM Matter Over WiFi Smart Switch: No
Sonoff MINI ONE Zigbee Smart Switch: Zigbee Hub required
Catalog note
Zigbee 3.0 over IEEE 802.15.4, EFR32MG21

Features

Automations

Sonoff MINI ONE PM Matter Over WiFi Smart Switch: Yes
Catalog note
Smart timers and scenes in eWeLink, plus HTTP, WebSocket and MQTT hooks for Home Assistant, OpenHAB, ioBroker and Node-RED
Sonoff MINI ONE Zigbee Smart Switch: Yes
Catalog note
Smart timer, smart scene, group control and Zigbee Binding for direct device-to-device local control without the gateway

Din Rail Mount

Sonoff MINI ONE PM Matter Over WiFi Smart Switch: No
Catalog note
Indoor concealed installation: it mounts inside an electrical box
Sonoff MINI ONE Zigbee Smart Switch: No
Catalog note
Designed for EU flush-mounted, 86-type and 120-type wall boxes, 60 mm depth recommended

Dry Contact Mode

Sonoff MINI ONE PM Matter Over WiFi Smart Switch: No
Catalog note
The manual's terminal table lists the two outputs as live wire output terminals, so the contact is not potential-free
Sonoff MINI ONE Zigbee Smart Switch: No

Energy Monitoring

Sonoff MINI ONE PM Matter Over WiFi Smart Switch

Yes

Manufacturer source

The switch measures energy in both directions.

Sonoff MINI ONE PM Matter Over WiFi Smart Switch manufacturer product page →

Source section: Product description
Model: Sonoff MINI ONE PM Matter Over WiFi Smart Switch
Region: Manufacturer product page; no universal regional compatibility implied
Firmware: Not specified by this source
Checked: 2026-10-04

Observe installation and load-type restrictions.

Document check only; not a hands-on test or verification of every regional or firmware variant.

Catalog note

Bidirectional metering, so it reads solar generation as well as consumption, with a year of local data storage

Sonoff MINI ONE Zigbee Smart Switch

Catalog note

Power metering is the separate MINI ONE PM model; this one reports no energy data and Zigbee2MQTT exposes none

Interlock Mode

Sonoff MINI ONE PM Matter Over WiFi Smart Switch: No
Sonoff MINI ONE Zigbee Smart Switch: No

On Off Button

Sonoff MINI ONE PM Matter Over WiFi Smart Switch: Yes
Catalog note
A single press toggles the load; press and hold for pairing or factory reset
Sonoff MINI ONE Zigbee Smart Switch: Yes

Ota

Sonoff MINI ONE PM Matter Over WiFi Smart Switch: Yes
Catalog note
SONOFF's MINI-1GSP knowledge center documents OTA firmware updates, including over MQTT from Home Assistant
Sonoff MINI ONE Zigbee Smart Switch: Yes
Catalog note
Over-the-air updates through eWeLink, Zigbee2MQTT and ZHA

Power Off Memory

Sonoff MINI ONE PM Matter Over WiFi Smart Switch: Yes
Sonoff MINI ONE Zigbee Smart Switch: Yes
Catalog note
Power-on state is configurable as On, Off or Keep, plus a delayed power-on timer to stagger loads after an outage

Relay Channels

Sonoff MINI ONE PM Matter Over WiFi Smart Switch: 1
Sonoff MINI ONE Zigbee Smart Switch: 1

Wet Contact Mode

Sonoff MINI ONE PM Matter Over WiFi Smart Switch: Yes
Catalog note
L Out carries the switched live wire to the load
Sonoff MINI ONE Zigbee Smart Switch: Yes
Catalog note
The two parallel L Out terminals switch mains live to the load

Wireless Switch Mode

Sonoff MINI ONE PM Matter Over WiFi Smart Switch: Yes
Catalog note
Detached relay mode turns the wired wall switch into a smart trigger
Sonoff MINI ONE Zigbee Smart Switch: Yes
Catalog note
Detach relay mode turns the wired wall switch into a smart trigger so connected smart bulbs never lose power

Zigbee Router

Sonoff MINI ONE PM Matter Over WiFi Smart Switch: No
Sonoff MINI ONE Zigbee Smart Switch: Yes
Catalog note
SONOFF lists its Zigbee role as Router: 180 m to the gateway by default and 250 m with Turbo mode enabled

Integrations

Alexa

Sonoff MINI ONE PM Matter Over WiFi Smart Switch: Yes
Catalog note
Via Matter
Sonoff MINI ONE Zigbee Smart Switch: Yes
Catalog note
SONOFF's own feature table lists on/off, smart scene and smart timer through Alexa, using an Echo with a built-in Zigbee hub or the eWeLink skill

Apple Home

Sonoff MINI ONE PM Matter Over WiFi Smart Switch: Yes
Catalog note
Via Matter
Sonoff MINI ONE Zigbee Smart Switch: SONOFF Hub required
Catalog note
The product page states it works with Apple Home via a SONOFF Matter bridge (ZBBridge-U, iHost or eWeLink CUBE with a SONOFF Zigbee dongle). Apple Home has no Zigbee radio of its own.

Google Home

Sonoff MINI ONE PM Matter Over WiFi Smart Switch: Yes
Catalog note
Via Matter
Sonoff MINI ONE Zigbee Smart Switch: Yes
Catalog note
SONOFF lists Google Home for this model via its Matter bridges or via eWeLink cloud-to-cloud once the switch is added through a SONOFF Zigbee gateway

Home Assistant

Sonoff MINI ONE PM Matter Over WiFi Smart Switch: Yes
Catalog note
Two paths: the manual documents adding it to Home Assistant via Matter, and SONOFF exposes local HTTP (JSON-RPC), WebSocket and MQTT APIs for it
Sonoff MINI ONE Zigbee Smart Switch: Yes
Catalog note
Zigbee2MQTT supports this exact model from version 2.12.1 and exposes state, power-on behaviour, detach relay mode, turbo mode and overheat reporting. ZHA support is still pending a merge, so ZHA users need SONOFF's setup script for the full feature set.

Matter

Sonoff MINI ONE PM Matter Over WiFi Smart Switch

Yes

Manufacturer source

Matter compatibility is specified.

Sonoff MINI ONE PM Matter Over WiFi Smart Switch manufacturer product page →

Source section: Product description
Model: Sonoff MINI ONE PM Matter Over WiFi Smart Switch
Region: Manufacturer product page; no universal regional compatibility implied
Firmware: Not specified by this source
Checked: 2026-10-04

Observe installation and load-type restrictions.

Document check only; not a hands-on test or verification of every regional or firmware variant.

Catalog note

Matter over Wi-Fi, the protocol the product is named for

Sonoff MINI ONE Zigbee Smart Switch

SONOFF Hub required

Catalog note

The switch itself is Zigbee, not Matter: SONOFF republishes it into Matter through its own bridges (ZBBridge-U, iHost, eWeLink CUBE with a SONOFF Zigbee dongle).

SmartThings

Sonoff MINI ONE PM Matter Over WiFi Smart Switch: Yes
Catalog note
Via Matter
Sonoff MINI ONE Zigbee Smart Switch: Yes
Catalog note
SONOFF's feature table lists SmartThings through the Aeotec SmartThings Hub (V3), which pairs it as a standard Zigbee device

Power

Ac Load Voltage

Sonoff MINI ONE PM Matter Over WiFi Smart Switch: 100-240V
Sonoff MINI ONE Zigbee Smart Switch: 100-240 V
Catalog note
Rated 16A 100-240V~ 50/60Hz

Ac Power

Sonoff MINI ONE PM Matter Over WiFi Smart Switch: Yes
Catalog note
Rated 16A 100-240V~ 50/60Hz, single-phase only
Sonoff MINI ONE Zigbee Smart Switch: Yes

Capacitive Load

Sonoff MINI ONE PM Matter Over WiFi Smart Switch: Not recorded
Sonoff MINI ONE Zigbee Smart Switch: Not recorded

Capacitive Maximum Load Current

Sonoff MINI ONE PM Matter Over WiFi Smart Switch: Not recorded
Sonoff MINI ONE Zigbee Smart Switch: Not recorded

Capacitive Maximum Load Power

Sonoff MINI ONE PM Matter Over WiFi Smart Switch: Not recorded
Sonoff MINI ONE Zigbee Smart Switch: Not recorded

Dc Load Voltage

Sonoff MINI ONE PM Matter Over WiFi Smart Switch: Not applicable / unspecified
Sonoff MINI ONE Zigbee Smart Switch: Not applicable / unspecified

Dc Maximum Load Current

Sonoff MINI ONE PM Matter Over WiFi Smart Switch: Not applicable / unspecified
Sonoff MINI ONE Zigbee Smart Switch: Not applicable / unspecified

Dc Maximum Load Power

Sonoff MINI ONE PM Matter Over WiFi Smart Switch: Not applicable / unspecified
Sonoff MINI ONE Zigbee Smart Switch: Not applicable / unspecified

Dc Power

Sonoff MINI ONE PM Matter Over WiFi Smart Switch: No
Catalog note
Mains AC only: the manual warns it is for single-phase 100-240V use
Sonoff MINI ONE Zigbee Smart Switch: No

Idle Consumption

Sonoff MINI ONE PM Matter Over WiFi Smart Switch: Not recorded
Sonoff MINI ONE Zigbee Smart Switch: Not recorded

Inductive Load

Sonoff MINI ONE PM Matter Over WiFi Smart Switch: Not recorded
Sonoff MINI ONE Zigbee Smart Switch: Not recorded

Inductive Maximum Load Current

Sonoff MINI ONE PM Matter Over WiFi Smart Switch: Not recorded
Sonoff MINI ONE Zigbee Smart Switch: Not recorded

Inductive Maximum Load Power

Sonoff MINI ONE PM Matter Over WiFi Smart Switch: Not recorded
Sonoff MINI ONE Zigbee Smart Switch: Not recorded

Neutral Required

Sonoff MINI ONE PM Matter Over WiFi Smart Switch: Yes
Catalog note
SONOFF's product FAQ answers that the MINI-1GSP does require a neutral wire
Sonoff MINI ONE Zigbee Smart Switch: Yes
Catalog note
SONOFF states a neutral wire is required, and the wiring diagram uses N, L, two parallel L Out terminals and the S1 external switch input

Resistive Load

Sonoff MINI ONE PM Matter Over WiFi Smart Switch: Yes
Catalog note
The official rating states 16A max resistive load
Sonoff MINI ONE Zigbee Smart Switch: Yes

Resistive Maximum Load Current

Sonoff MINI ONE PM Matter Over WiFi Smart Switch

16A

Manufacturer source

The stated maximum load current is 16 A.

Sonoff MINI ONE PM Matter Over WiFi Smart Switch manufacturer product page →

Source section: Product description
Model: Sonoff MINI ONE PM Matter Over WiFi Smart Switch
Region: Manufacturer product page; no universal regional compatibility implied
Firmware: Not specified by this source
Checked: 2026-10-04

Observe installation and load-type restrictions.

Document check only; not a hands-on test or verification of every regional or firmware variant.

Sonoff MINI ONE Zigbee Smart Switch

16A

Catalog note

60% higher than the ZBMINIR2, which is rated 10A

Resistive Maximum Load Power

Sonoff MINI ONE PM Matter Over WiFi Smart Switch: Not recorded
Sonoff MINI ONE Zigbee Smart Switch: 3840W

Safety Features

Overcurrent Protection

Sonoff MINI ONE PM Matter Over WiFi Smart Switch: Yes
Sonoff MINI ONE Zigbee Smart Switch: Not recorded

Overheating Protection

Sonoff MINI ONE PM Matter Over WiFi Smart Switch: Yes
Sonoff MINI ONE Zigbee Smart Switch: Yes
Catalog note
Built-in high-precision temperature sensing cuts the relay output when the temperature approaches the safety threshold, and Zigbee2MQTT exposes the resulting device_overheated attribute

Overpower Protection

Sonoff MINI ONE PM Matter Over WiFi Smart Switch: Yes
Catalog note
The relay cuts power when current, voltage, power or temperature passes its safe limit
Sonoff MINI ONE Zigbee Smart Switch: Not recorded

Overvoltage Protection

Sonoff MINI ONE PM Matter Over WiFi Smart Switch: Yes
Sonoff MINI ONE Zigbee Smart Switch: Not recorded

Specifications for Sonoff MINI ONE PM Matter Over WiFi Smart Switch versus Sonoff MINI ONE Zigbee Smart Switch
Specification	Sonoff MINI ONE PM Matter Over WiFi Smart Switch	Sonoff MINI ONE Zigbee Smart Switch
Connectivity
2.4 GHz Wi-Fi	Yes Catalog note IEEE 802.11 b/g/n 2.4GHz	No
5 GHz Wi-Fi	No	No
Bluetooth	For Pairing Catalog note The manual's EU declaration of conformity lists BLE 2402-2480 MHz for this model, the transport Matter uses to commission a Wi-Fi device	Yes Catalog note BLE powers Proximity Mode, which lets the phone connect to the switch directly for basic control and settings when no Zigbee gateway is available
Radio Frequency	No	No
Thread	No	No
Z Wave	No	No
Zigbee	No	Zigbee Hub required Catalog note Zigbee 3.0 over IEEE 802.15.4, EFR32MG21
Features
Automations	Yes Catalog note Smart timers and scenes in eWeLink, plus HTTP, WebSocket and MQTT hooks for Home Assistant, OpenHAB, ioBroker and Node-RED	Yes Catalog note Smart timer, smart scene, group control and Zigbee Binding for direct device-to-device local control without the gateway
Din Rail Mount	No Catalog note Indoor concealed installation: it mounts inside an electrical box	No Catalog note Designed for EU flush-mounted, 86-type and 120-type wall boxes, 60 mm depth recommended
Dry Contact Mode	No Catalog note The manual's terminal table lists the two outputs as live wire output terminals, so the contact is not potential-free	No
Energy Monitoring	Yes Manufacturer source The switch measures energy in both directions. Sonoff MINI ONE PM Matter Over WiFi Smart Switch manufacturer product page → Source section Product description Model Sonoff MINI ONE PM Matter Over WiFi Smart Switch Region Manufacturer product page; no universal regional compatibility implied Firmware Not specified by this source Checked 2026-10-04 Observe installation and load-type restrictions. Document check only; not a hands-on test or verification of every regional or firmware variant. Catalog note Bidirectional metering, so it reads solar generation as well as consumption, with a year of local data storage	No Catalog note Power metering is the separate MINI ONE PM model; this one reports no energy data and Zigbee2MQTT exposes none
Interlock Mode	No	No
On Off Button	Yes Catalog note A single press toggles the load; press and hold for pairing or factory reset	Yes
Ota	Yes Catalog note SONOFF's MINI-1GSP knowledge center documents OTA firmware updates, including over MQTT from Home Assistant	Yes Catalog note Over-the-air updates through eWeLink, Zigbee2MQTT and ZHA
Power Off Memory	Yes	Yes Catalog note Power-on state is configurable as On, Off or Keep, plus a delayed power-on timer to stagger loads after an outage
Relay Channels	1	1
Wet Contact Mode	Yes Catalog note L Out carries the switched live wire to the load	Yes Catalog note The two parallel L Out terminals switch mains live to the load
Wireless Switch Mode	Yes Catalog note Detached relay mode turns the wired wall switch into a smart trigger	Yes Catalog note Detach relay mode turns the wired wall switch into a smart trigger so connected smart bulbs never lose power
Zigbee Router	No	Yes Catalog note SONOFF lists its Zigbee role as Router: 180 m to the gateway by default and 250 m with Turbo mode enabled
Integrations
Alexa	Yes Catalog note Via Matter	Yes Catalog note SONOFF's own feature table lists on/off, smart scene and smart timer through Alexa, using an Echo with a built-in Zigbee hub or the eWeLink skill
Apple Home	Yes Catalog note Via Matter	SONOFF Hub required Catalog note The product page states it works with Apple Home via a SONOFF Matter bridge (ZBBridge-U, iHost or eWeLink CUBE with a SONOFF Zigbee dongle). Apple Home has no Zigbee radio of its own.
Google Home	Yes Catalog note Via Matter	Yes Catalog note SONOFF lists Google Home for this model via its Matter bridges or via eWeLink cloud-to-cloud once the switch is added through a SONOFF Zigbee gateway
Home Assistant	Yes Catalog note Two paths: the manual documents adding it to Home Assistant via Matter, and SONOFF exposes local HTTP (JSON-RPC), WebSocket and MQTT APIs for it	Yes Catalog note Zigbee2MQTT supports this exact model from version 2.12.1 and exposes state, power-on behaviour, detach relay mode, turbo mode and overheat reporting. ZHA support is still pending a merge, so ZHA users need SONOFF's setup script for the full feature set.
Matter	Yes Manufacturer source Matter compatibility is specified. Sonoff MINI ONE PM Matter Over WiFi Smart Switch manufacturer product page → Source section Product description Model Sonoff MINI ONE PM Matter Over WiFi Smart Switch Region Manufacturer product page; no universal regional compatibility implied Firmware Not specified by this source Checked 2026-10-04 Observe installation and load-type restrictions. Document check only; not a hands-on test or verification of every regional or firmware variant. Catalog note Matter over Wi-Fi, the protocol the product is named for	SONOFF Hub required Catalog note The switch itself is Zigbee, not Matter: SONOFF republishes it into Matter through its own bridges (ZBBridge-U, iHost, eWeLink CUBE with a SONOFF Zigbee dongle).
SmartThings	Yes Catalog note Via Matter	Yes Catalog note SONOFF's feature table lists SmartThings through the Aeotec SmartThings Hub (V3), which pairs it as a standard Zigbee device
Power
Ac Load Voltage	100-240V	100-240 V Catalog note Rated 16A 100-240V~ 50/60Hz
Ac Power	Yes Catalog note Rated 16A 100-240V~ 50/60Hz, single-phase only	Yes
Capacitive Load	Not recorded	Not recorded
Capacitive Maximum Load Current	Not recorded	Not recorded
Capacitive Maximum Load Power	Not recorded	Not recorded
Dc Load Voltage	Not applicable / unspecified	Not applicable / unspecified
Dc Maximum Load Current	Not applicable / unspecified	Not applicable / unspecified
Dc Maximum Load Power	Not applicable / unspecified	Not applicable / unspecified
Dc Power	No Catalog note Mains AC only: the manual warns it is for single-phase 100-240V use	No
Idle Consumption	Not recorded	Not recorded
Inductive Load	Not recorded	Not recorded
Inductive Maximum Load Current	Not recorded	Not recorded
Inductive Maximum Load Power	Not recorded	Not recorded
Neutral Required	Yes Catalog note SONOFF's product FAQ answers that the MINI-1GSP does require a neutral wire	Yes Catalog note SONOFF states a neutral wire is required, and the wiring diagram uses N, L, two parallel L Out terminals and the S1 external switch input
Resistive Load	Yes Catalog note The official rating states 16A max resistive load	Yes
Resistive Maximum Load Current	16A Manufacturer source The stated maximum load current is 16 A. Sonoff MINI ONE PM Matter Over WiFi Smart Switch manufacturer product page → Source section Product description Model Sonoff MINI ONE PM Matter Over WiFi Smart Switch Region Manufacturer product page; no universal regional compatibility implied Firmware Not specified by this source Checked 2026-10-04 Observe installation and load-type restrictions. Document check only; not a hands-on test or verification of every regional or firmware variant.	16A Catalog note 60% higher than the ZBMINIR2, which is rated 10A
Resistive Maximum Load Power	Not recorded	3840W
Safety Features
Overcurrent Protection	Yes	Not recorded
Overheating Protection	Yes	Yes Catalog note Built-in high-precision temperature sensing cuts the relay output when the temperature approaches the safety threshold, and Zigbee2MQTT exposes the resulting device_overheated attribute
Overpower Protection	Yes Catalog note The relay cuts power when current, voltage, power or temperature passes its safe limit	Not recorded
Overvoltage Protection	Yes	Not recorded

Know what’s behind the comparison.

The table matches specifications by section and field. It preserves notes, separates missing data from explicit “No” values, and keeps qualifications attached to their values. No overall winner is assigned from feature counts.

Read our comparison methodology