Mammotion LUBA 3 AWD 1500H vs Segway Navimow i206 AWD

Listed as Alarm in the technical specifications and documented as a geofence alert: the app pushes a notification when the robot moves more than 50 m (164 ft) outside its task area

A lifted alarm and an out-of-boundary geo-fence alarm, both of which need the 4G service to be active.

The manual's Security & Tracking section documents only the geofence alarm and GPS theft tracking; Mammotion publishes no start-up PIN for the LUBA 3

The operating bands table in the LUBA 3 AWD manual gives the robot 2400-2483 MHz plus 5500-5700 MHz and 5745-5825 MHz. The table is the EU declaration and Mammotion publishes no separate band list for the North American SKU, but the only per-model exclusion it notes is the GNSS band, which it says the 1500/1500H/3000/3000H do not support

Navimow's own connection guide states that the mowers must be joined to the 2.4 GHz band and do not support 5 GHz.

Built-in 4G module with 3 years of data included; Mammotion states a subscription is required to keep the service after that

A built-in 4G module carries the Network RTK service and the app connection; the correction data is included at no cost, and Connect+ is free for the first year and then renews annually at 32.90 dollars.

Xero-Turn AWD: a concentric third wheel engages on demand, giving the i206 AWD all-wheel drive on 45% (24 degree) slopes and rough ground while using less energy on the flat.

The LUBA 3 AWD user manual gives the vertical obstacle passing ability per chassis: 80 mm (3.1 in) for the H versions and 50 mm (2 in) for the standard-height versions

The height is set by hand on the mower, across a 2 to 3.6 in range, rather than from the app, so there is no per-zone cutting height.

The LUBA 3 cutting system is two inset discs with no side trimmer: Mammotion's own comparison lists an edge cutting disc for the LUBA mini 2 AWD and none for any LUBA 3, and the app only offers a Perimeter Laps path mode

The i2 AWD manual documents an Edge Mowing pass that can be enabled or disabled per zone from Map management.

The product overview labels a supplemental light next to the vision module on the front of the robot, which is what keeps the cameras working on night sessions

The parts list in the manual has an ambient light that signals mower status, and no front lamps.

Scheduling is a fixed calendar: the manual documents dates and times per task area, and the only weather behaviour is the reactive rain detection that pauses a run already under way. Nothing adapts the frequency to growth, season or a forecast

The mower reads the live forecast and stops or postpones sessions for rain, snow, frost, heat and strong wind, each configurable on its own.

360 degree x 59 degree LiDAR with a detection range up to 230 ft at 80% reflectivity

The locating system is EFLS NRTK (Network RTK plus vision) and the object detection system is the VisionFence camera. The LiDAR variant of the same generation is the i2 LiDAR series.

Unlike the 3000 and 5000 models, the LUBA 3 AWD 1500 drops NetRTK entirely: Mammotion states its 360 degree LiDAR covers up to 0.37 acre without the need for RTK/NetRTK

The 1500 is the one LUBA 3 without RTK: the manual lists its positioning as 360 LiDAR Module & AI Vision, and the packing list notes the 1500/1500H ships without the RTK reference station, antenna, extension cable and power supply

Tri-frequency Network RTK fused with vision, delivered over the built-in cellular module, so the i2 AWD spec sheet marks antenna installation as not required. A GNSS antenna kit is still in the box for Local RTK where the network service has no coverage.

Built-in rain sensors stop the mow and send the robot back to the charging station when rain is detected, switched on under Rain Protection

Extreme weather is handled from the online forecast rather than a physical rain sensor: the mower detects rain, wind, frost, snow and heat and stays in its charging station. The manual's sensor inventory lists only the GNSS receiver, the camera, the lift sensor and the IMU.