Segway Navimow X450 vs WORX Landroid Vision Cloud WR320

The mower carries its own GNSS receiver (GPS, GLONASS, BeiDou, Galileo and SBAS) for RTK positioning, and Worx states the Vision Cloud can be located from the app if it ever leaves the property. There is no 4G module on this model, so the link back to the app is Wi-Fi or RadioLink

A four-digit PIN is chosen the first time the mower is started, and the mower will only run with the power key switched on and the correct PIN entered

Wi-Fi band listed as 2412-2462 MHz, and the app asks for a region selection for a Wi-Fi 2.4G device

The technical data declares only the 2.4 GHz band for Wi-Fi

Bluetooth on 2400-2483.5 MHz, used for pairing and for control during setup

The Home Assistant integration exposes the mower as a lawn mower entity with start, pause and dock plus battery, status and error sensors, so it can be driven from, and can trigger, other smart home events. The Alexa skill also starts and stops a mow by voice

The app edits the map, defines no-go areas, draws custom pathways between zones and drives the mower remotely, over Wi-Fi or the RadioLink connection

The map and the mower's progress are monitored live in the app at any time

Schedule management in the Landroid app, alongside the activity log and multi-zone management

Worx describes automatic scheduling that works out the mowing plan from grass species, season, sunlight, rainfall and growth rate instead of following a fixed calendar

The official Landroid skill by Positec states it is compatible with all Landroid models and needs a mower with Wi-Fi, Find My Landroid or Radio Link, made in or after 2016 and registered in the Landroid app, all of which this model meets. It starts and stops mowing, sends the mower back to its base and reports status and battery level

Worx makes no HomeKit claim for this model and it is not Matter certified, so there is no path into the Home app

Official Segway Navimow integration for Home Assistant, installed through HACS and exposing the mower as a lawn mower entity

Reached through community HACS integrations built on the pyworxcloud library, which sign in with the Landroid app account. ha-landroid-vision targets the Landroid Vision, Vision Cloud and RTK mowers specifically and exposes a native lawn mower entity with start, pause and dock plus an RTK map and diagnostics, and the older landroid_cloud component covers the cloud-connected Landroid line

Worx makes no Matter claim for the Landroid line and the mower has no Matter commissioning code

Worx makes no SmartThings claim for this model, and without Matter certification the automatic Works with SmartThings path does not apply either

The neural network is trained to identify anything that is not grass or leaves rather than to match a fixed list of objects, with onboard processing quoted at up to 10 trillion operations per second

No perimeter cable and no on-site reference antenna: Vision AI maps the lawn automatically and the boundary is then edited in the app

The manual's technical data lists a stereo camera as the only optical sensor, with no LiDAR module

Multi-zone management is listed in the technical data, and the app manages unlimited mowing zones with custom pathways between them

No-go areas are drawn in the app, and the box includes 6 m of No-Go Line with 10 lawn stakes

Safety stop button on top of the mower, identified in the manual's component diagram

The mower halts and reports error E05, Mower Lifted, when it is picked up, and E06, Mower upside down, when it is turned over

Vision AI reacts to anything in the garden that is not grass or leaves rather than to a fixed object list, so pets and children in the path are treated as obstacles to avoid

Listed in the technical data and identified on the mower in the manual's component diagram