WORX Landroid Vision Cloud WR320

Commercial-grade RTK corrections are delivered to the mower over the internet with no antenna to install in the garden, and V-SLAM sensor fusion with the stereo camera takes over where trees or buildings block the satellite signal

No perimeter cable and no on-site reference antenna: Vision AI maps the lawn automatically and the boundary is then edited in the app

The RTK receiver is built into the mower and the corrections arrive from the Worx RTK Cloud, which the listing states carries no additional cloud costs

The manual's technical data lists a stereo camera as the only optical sensor, with no LiDAR module

The neural network is trained to identify anything that is not grass or leaves rather than to match a fixed list of objects, with onboard processing quoted at up to 10 trillion operations per second

Multi-zone management is listed in the technical data, and the app manages unlimited mowing zones with custom pathways between them

No-go areas are drawn in the app, and the box includes 6 m of No-Go Line with 10 lawn stakes

The mower carries its own GNSS receiver (GPS, GLONASS, BeiDou, Galileo and SBAS) for RTK positioning, and Worx states the Vision Cloud can be located from the app if it ever leaves the property. There is no 4G module on this model, so the link back to the app is Wi-Fi or RadioLink

A four-digit PIN is chosen the first time the mower is started, and the mower will only run with the power key switched on and the correct PIN entered

The manual documents the PIN lock and the app alerts, but no audible siren

Wi-Fi band listed as 2412-2462 MHz, and the app asks for a region selection for a Wi-Fi 2.4G device

The technical data declares only the 2.4 GHz band for Wi-Fi

Bluetooth on 2400-2483.5 MHz, used for pairing and for control during setup

The 1/2 acre Vision Cloud declares Bluetooth, Wi-Fi and RadioLink as its radios. The 4G link and the Find My Landroid module that carries it are listed only on the 1 acre WR340

RadioLink is a dedicated radio link between the mower and its charging station that relays the cloud RTK corrections and extends coverage beyond normal Wi-Fi range. The manual's accessories table ships the module with this model

Cutting area of 1/2 acre (2000 m2) in the manual's technical data, the entry point of the Vision Cloud line above the 1/4 acre WR310

Slope rated at 30% (17 degrees) in the manual's technical data

Two-wheel drive, sold on the listing as the Two-Wheel Drive style; the 4WD Vision Cloud models are the ones aimed at steep or broken ground

Cutting diameter of 8.7 in (22 cm) in the manual's technical data

Six cutting heights in the manual's technical data: 1.57, 1.97, 2.36, 2.76, 3.15 and 3.54 in (40 to 90 mm)

Electric cutting height adjustment in the manual's technical data, set from the app, including different heights for different areas of the garden

Vision AI reads the boundary type and crosses ridable edges or follows fixed borders as closely as it can, sold on the listing as Cut-to-Edge border cutting. The Cut to Zero offset blade module that trims right to the line is not in this model's box: the manual's accessories table gives it only to the WR310.1 and WR320.1

Three blades and a no-load speed of 2400 rpm in the manual's technical data, with six spare blades in the box

Schedule management in the Landroid app, alongside the activity log and multi-zone management

Worx describes automatic scheduling that works out the mowing plan from grass species, season, sunlight, rainfall and growth rate instead of following a fixed calendar

The map and the mower's progress are monitored live in the app at any time

The app edits the map, defines no-go areas, draws custom pathways between zones and drives the mower remotely, over Wi-Fi or the RadioLink connection

The FiatLux light module is standard only on selected models and the manual tells owners of this one to buy a FiatLux light separately if they want it

The Home Assistant integration exposes the mower as a lawn mower entity with start, pause and dock plus battery, status and error sensors, so it can be driven from, and can trigger, other smart home events. The Alexa skill also starts and stops a mow by voice

The official Landroid skill by Positec states it is compatible with all Landroid models and needs a mower with Wi-Fi, Find My Landroid or Radio Link, made in or after 2016 and registered in the Landroid app, all of which this model meets. It starts and stops mowing, sends the mower back to its base and reports status and battery level

Worx makes no HomeKit claim for this model and it is not Matter certified, so there is no path into the Home app

Worx makes no SmartThings claim for this model, and without Matter certification the automatic Works with SmartThings path does not apply either

Reached through community HACS integrations built on the pyworxcloud library, which sign in with the Landroid app account. ha-landroid-vision targets the Landroid Vision, Vision Cloud and RTK mowers specifically and exposes a native lawn mower entity with start, pause and dock plus an RTK map and diagnostics, and the older landroid_cloud component covers the cloud-connected Landroid line

Worx makes no Matter claim for the Landroid line and the mower has no Matter commissioning code

Worx PowerShare 20V Max Li-ion pack, battery model WA3675 in the manual's technical data

Battery average life as declared on the Amazon listing; Worx does not publish a runtime figure in the technical data

Charging time of approximately 100 minutes with the supplied WA3752 charger, per the manual's technical data and the product page

The pack lifts out from under the battery cover and is shared with the rest of the Worx PowerShare cordless range

Listed in the technical data and identified on the mower in the manual's component diagram

The mower halts and reports error E05, Mower Lifted, when it is picked up, and E06, Mower upside down, when it is turned over

Vision AI reacts to anything in the garden that is not grass or leaves rather than to a fixed object list, so pets and children in the path are treated as obstacles to avoid

Safety stop button on top of the mower, identified in the manual's component diagram