Shelly Wall Display XL

A 5-point capacitive touch screen with a G+FF stack.

The radio section lists Wi-Fi and Bluetooth only, with no Zigbee radio.

No 802.15.4 radio is listed, so the panel cannot act as a Thread border router.

Shelly documents MQTT, Webhooks and Home Assistant for this panel, and no Matter bridging.

Wi-Fi 6 dual band, with the 2.4 GHz radio covering 2412 to 2472 MHz.

The same Wi-Fi 6 radio also covers 5150 to 5850 MHz, so the panel can join a 5 GHz network.

The radio is specified as Wi-Fi 6 dual band (2.4 and 5 GHz), not Wi-Fi 6E.

Bluetooth 5.4, used to pair Bluetooth speakers and to reach Shelly BLU devices.

The connectivity list is Wi-Fi and Bluetooth only. The wiring terminals are line, neutral, a switch input and the relay output, with no network port.

Two of the four physical buttons are volume up and volume down by default, both with hold support.

The physical buttons can be reassigned to media player controls (previous, next, pause, stop, choose song).

The only hardware buttons are the screen on/off button and the four customizable ones, with no microphone cut-off.

The panel installs in a standard electrical wall box, wired to line, neutral and its relay output. A neutral wire is required.

Shelly's own knowledge base lists this panel's Google Smart Home supported traits as N/A, where its relays and sensors list them as Yes.

Shelly's own knowledge base lists this panel's Amazon Alexa supported capabilities as N/A, where its relays and sensors list them as Yes. The Amazon listing title claims Alexa support, but the manufacturer's documentation does not.

The spec sheet lists only Wi-Fi and Bluetooth radios and no Matter support, and neither the product page nor the knowledge base documents an Apple Home path for the panel.

Shelly's own knowledge base lists this panel's Samsung SmartThings supported capabilities as N/A, where its relays and sensors list them as Yes.

Shelly lists Home Assistant Integration among the panel's key features and states that it works over Wi-Fi and Bluetooth with support for MQTT, Webhooks and Home Assistant.

A proximity sensor with a range of about 1 metre wakes the display when somebody approaches.

Shelly's spec sheet marks both the internal and the ambient temperature sensor as No, unlike the smaller Wall Display. Climate automations read from paired Shelly sensors instead.

The humidity sensor row on Shelly's spec sheet reads No.

A built-in lux sensor, which can also drive automations on ambient brightness.

No camera is fitted. The sensor list is the light sensor, the proximity sensor and the microphone array.

The panel carries a four-microphone line array, but Shelly documents no built-in voice assistant on it.