WORX Landroid Vision Cloud 4WD WR344

No perimeter wire and no local RTK antenna to install: the boundary is created by Vision AI mapping and corrections arrive over the cloud

The technical data sheet lists a stereo camera and V-SLAM, with no LiDAR module

Multi-zone management is listed in the technical data; the app manages mowing zones with custom pathways between them

No-go areas are drawn in the app, and the box also includes 19.7 ft of No-Go Tape with 10 stakes

The Find My Landroid module is built in on this model and tracks the mower's GPS location over a constant 4G connection, so it can be located from the app even when it is powered off

The Find My Landroid feature list documents GPS location, geofence notifications and an app-side remote lock, but no start-up PIN, and the mower carries no keypad

Find My Landroid automatically notifies through the app when the mower is removed from its mowing area, and the mower can then be locked remotely. It is an app alert rather than an audible siren

The owner's manual documents the mower as a Wi-Fi 2.4G device

Bluetooth enables pairing and binding with the phone and also allows device control during the mapping process

The Find My Landroid module ships in the box and keeps a constant 4G connection through a multi-IMSI SIM; the first year of cellular service is included and is renewed in the app afterwards

Four-wheel drive with a terrain-adaptive chassis and a front steering system, specified for slopes up to 84% (40 degrees)

Seven cutting height positions across the range

Set in the app, including different heights for different areas

The Cut-to-Zero offset blade module is 110 mm wide and trims closer to fixed borders, reducing manual string trimming

Three pivoting blades on a self-levelling blade disc, 2400 rpm no-load speed

Schedule management in the Landroid app, alongside multi-zone management

The only weather behaviour documented is the reactive rain sensor, which triggers a rain delay and postpones the session under way. Nothing adapts the mowing frequency to growth, season or a forecast

Progress is monitored live in the app, and the 4G link keeps status updates flowing without relying on Wi-Fi reaching the far end of the garden

FiatLux light module, included on this model. Automatic light sensing switches on eye-safe illumination at night so the cameras keep working after sunset

The official Landroid skill by Positec states it is compatible with all Landroid models and requires a mower with Wi-Fi or Find My Landroid, made in or after 2016 and registered in the Landroid app, all of which this model meets. It starts and stops mowing, sends the robot back to its base and reports status and battery level

WORX claims no HomeKit support and the model is not Matter certified, so there is no path into the Home app

WORX claims no SmartThings support and the model is not Matter certified, so the automatic Works with SmartThings path does not apply

Reached through custom HACS integrations built on the pyworxcloud library: ha-landroid-vision targets the Landroid Vision / Vision Cloud / RTK mowers specifically, with full controls, RTK live map, mowing statistics and diagnostics, and the older landroid_cloud component covers the cloud-connected Landroid line

No WORX or Landroid entry in the CSA certified products database, and the manufacturer makes no Matter claim

WORX PowerShare 20V Li-ion pack, battery model WA3675

Listed in the technical data; the mower reports a rain delay and postpones the session

The blade disc stops turning as soon as the mower is lifted off the ground or tilted

Vision AI recognises and reacts to objects in the yard including pets, and the FiatLux light keeps the cameras working after dark so it can detect and avoid hedgehogs and other nocturnal wildlife

Physical safety stop button on top of the mower