WORX Landroid Vision Cloud WR340

RTK corrections are delivered over the internet to each mower, with a stereo camera and V-SLAM sensor fusion taking over where trees or buildings block the satellite signal

No perimeter cable and no reference antenna in the garden: the lawn is mapped automatically by Vision AI and the boundary is then edited in the app

The RTK module is built into the mower and the corrections arrive from the WORX RTK Cloud, which the brand states is free for the life of the product

The WR340 technical data lists a stereo camera, with no LiDAR module

The neural network is trained to identify anything that is not grass or leaves rather than to match a fixed list of objects, with onboard processing quoted at up to 10 trillion operations per second

Multi-zone management is listed in the technical data, and the app manages unlimited mowing zones with custom pathways between them

No-go areas are drawn in the app, and the box includes 6 m of No-Go Line with 10 lawn stakes

The Find My Landroid module is fitted on this model and pairs GPS with the cellular link, so the mower can be located from the app even when it is powered off

A four-digit PIN is chosen the first time the mower is started, and the mower will only run with the power key on and the correct PIN entered

Find My Landroid sends alerts to the app and allows the mower to be locked remotely, but WORX documents no audible siren

Wi-Fi band listed as 2412-2462 MHz, and the app asks for a region selection for a Wi-Fi 2.4G device

The technical data declares only the 2.4 GHz band for Wi-Fi

Bluetooth on 2400-2483.5 MHz, used for pairing and for control during setup

The Find My Landroid 4G module is fitted on this model and WORX advertises the connectivity as free, so the mower stays reachable and trackable where Wi-Fi does not cover the garden

The radios in the technical data are Bluetooth, 2.4 GHz Wi-Fi and 4G; the GNSS block (GPS, GLONASS, BeiDou, Galileo and SBAS) is receive-only

Recommended lawn size of 1 acre, written as 1 acre (4000 m2) in the manual's technical data

30% (17 degrees). The manual adds that with the Cut to Zero module fitted, slopes steeper than 15 degrees are not recommended

Two-wheel drive, the entry point of the Vision Cloud line; the 4WD models are the ones rated for steep ground

Six cutting heights across the range: 1.57, 1.97, 2.36, 2.76, 3.15 and 3.54 in

Set from the app, including different heights for different areas of the garden

The Cut to Zero offset blade module ships with this model and trims closer to fixed borders, at its own heights of 2.6, 3.0 and 3.4 in

Three blades on a self-levelling disc, 2400 rpm no-load speed

Schedule management in the Landroid app, alongside multi-zone management

WORX describes weather-adaptive automatic scheduling that works out the mowing plan from grass species, season, sunlight, rainfall and growth rate instead of following a fixed calendar

The map and the mower's progress are monitored live in the app, and the built-in 4G keeps the status flowing when Wi-Fi does not reach the far end of the garden

The manual describes both the Wi-Fi and the 4G links as supporting remote monitoring, control and parameter configuration from the app

The FiatLux light module ships with this model. Automatic light sensing switches on eye-safe illumination after sunset so the cameras keep working at night

The official Landroid skill by Positec states it is compatible with all Landroid models and needs a mower with Wi-Fi or Find My Landroid, made in or after 2016 and registered in the Landroid app, all of which this model meets. It starts and stops mowing, sends the mower back to its base and reports status and battery level

WORX makes no HomeKit claim for this model and it is not Matter certified, so there is no path into the Home app

WORX makes no SmartThings claim for this model, and without Matter certification the automatic Works with SmartThings path does not apply either

Reached through community HACS integrations built on the pyworxcloud library. ha-landroid-vision targets the Landroid Vision, Vision Cloud and RTK mowers specifically, with controls, an RTK live map and diagnostics, and the older landroid_cloud component covers the cloud-connected Landroid line

WORX makes no Matter claim for the Landroid line and the mower has no Matter commissioning code

WORX PowerShare 20V Max Li-ion pack, battery model WA3675

Battery average life as declared on the Amazon listing; WORX does not publish a runtime figure in the technical data

Charging time approximately 60 minutes with the supplied WA3805 charger

The pack lifts out from under the battery cover and is shared with the rest of the WORX PowerShare cordless range

Listed in the technical data and identified on the mower in the manual's component diagram

The mower halts and reports error E05 when it is lifted and E06 when it is turned upside down, and normal operation only resumes once it is put back on level ground

Vision AI reacts to anything in the garden that is not grass or leaves, and the FiatLux light switches on automatically after dark so the cameras keep detecting and avoiding pets and nocturnal wildlife

Safety stop button on top of the mower; the manual instructs pressing STOP before moving the mower inside the working area